Grinding Machines

Quality, durable construction.
Made in Taiwan.
240 Volt Industrial Motor.
Smooth, low vibration operation.
Large sturdy base.

Motor: 1.5KW Single Phase 240V
Contact Wheel: 170 X 100mm
Platen Surface: 405 X 100mm
Grinding Belt: 1500 X 100mm

Powerful 370W induction motor.
25mm width grinding wheels with 36 & 60 grit for fast removal of material.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother operation.
Capacitor Start-Run motor for maximum performance.
Fully adjustable tool rests for ease of use and maximum user control.
Large eye shields for increased user safety.

Motor Power: 370W
Speed: 2980RPM
Wheel Size: 150mm x 25mm
Spindle Thread: M12 x 1.75mm
Weight: 11.1kg

Powerful 600W Induction Motor.
25mm width grinding wheels with 36 and 60 grit for fast removal of material.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother running.
Capacitor Start-Run motor for maximum performance.
Heavy Duty tool rests for maximum user control.
Large eyes shields for increased user safety.

Motor Power: 600W
Speed: 2980RPM
Wheel Size: 200mm x 25mm
Spindle Thread: M16 x 2mm
Weight: 16.7kg

Powerful 550W Induction Motor.
Safety lock On/Off switch.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother running.
Capacitor Start-Stop motor for maximum performance.
Includes 200mm x 14mm stitched polishing mops.

Motor Power: 550W
Speed: 2850RPM
Wheel Size: 200mm x 14mm
Spindle Thread: M16 x 2mm
Weight: 11.5kg

High Quality Robust Machine from Denmark. Smooth efficient metal grinding up to 10 times faster than conventional stone grinders. 5 year motor warranty.

Smooth, low vibration high output operation.
Solid 5mm thick plate work rest with multi-position system.
2860rpm Belt Speed enables fast & efficient metal removal.
Simple & precise belt tracking adjustment.
Durable 90 durometer rubber contact wheel.
Emergency Stop NVR safety switch

Motor: 3.0KW 3Phase 415V
Contact Wheel: 200 X 75mm
Platen Surface: 540 X 75mm
Grinding Belt: 2000 X 75mm

High Quality Robust Machine from Denmark. Smooth efficient metal grinding up to 10 times faster than conventional stone grinders. 5 year motor warranty.

FEATURES.
Smooth, low vibration high output operation.
Solid 5mm thick plate work rest with multi-position system.
2860rpm Belt Speed enables fast & efficient metal removal.
Simple & precise belt tracking adjustment.
Durable 90 durometer rubber contact wheel.
Emergency Stop NVR safety switch

Motor: 3.6KW 3Phase 415V
Contact Wheel: 200 X 150mm
Platen Surface: 540 X 150mm
Grinding Belt: 2000 X 150mm

High Quality Robust Machine Made In Denmark, Smooth & efficient metal grinding & notching. 5 year motor warranty.

Smooth, low vibration high output operation.
Notches pipe & tubing between 30 & 90° angles.
Platen grinding surface.

Motor: 3.6KW 3Phase 415V
Flat Surface: 605 x 150mm
Grinding Belt: 2250 x 150mm
Vice: 30° – 90° Swivel Vice
Pipe O.D Capacity: 17 – 100mm
Weight: 140KG

Industrial Bench Grinder Stand for use with most 200mm and 250mm Bench Grinders.
Includes emergency stop switch.
Excellent work height for comfortable extended use.
Heavy duty steel construction.
Pre-slotted top plate for multi-fit applications.
Pre-drilled base plate for easy mounting.
Heavy duty powder coat finish.

Total Height: 855mm
Weight: 14kg
Top Plate: 350mm x 250mm x 5mm
Base Plate: 350mm x 250mm x 5mm
Upright Tube Dimension: 100mm x 100mm

High Quality robust construction, made in Taiwan, designed to give long service life in demanding industrial workplaces.
All machines include adjustable eye shields and grinding wheels.
High powered motor rated at it’s true output power.
Fully balanced motor providing smooth operation.
Capacitor start and run provides instant startup and running power.
Available with Non Voltage Return (NVR) safety switch, which stops machine from re-starting during workshop power failures

Wheel Diameter: 250mm (10″)
Wheel Width: 38mm
Bore: 25.4mm
Motor Power: 1.3HP (1.0kW)
Voltage: 240V
Speed: 2850rpm
Weight: 43Kgs
Thread Size: 1″ – 8TPI BSW
Switch: Standard

High Quality robust construction, made in Taiwan, designed to give long service life in demanding industrial workplaces.
All machines include adjustable eye shields and grinding wheels.
High powered motor rated at it’s true output power.
Fully balanced motor providing smooth operation.
Capacitor start and run provides instant startup and running power.
Available with Non Voltage Return (NVR) safety switch, which stops machine from re-starting during workshop power failures

Wheel Diameter: 250mm (10″)
Wheel Width: 38mm
Bore: 25.4mm
Motor Power: 1.3HP (1.0kW)
Voltage: 415V
Speed: 2850rpm
Weight: 43Kgs
Thread Size: 1″ – 8TPI BSW
Switch: Standard

High Quality robust construction, made in Taiwan, designed to give long service life in demanding industrial workplaces.
All machines include adjustable eye shields and grinding wheels.
High powered motor rated at its true output power.
Fully balanced motor providing smooth operation.
Capacitor start and run provides instant startup and running power.
Available with Non Voltage Return (NVR) safety switch, which stops machine from re-starting during workshop power failures

Wheel Diameter: 200mm (8)
Wheel Width: 25mm
Bore: 15.9mm
Motor Power: 1HP (0.75kW)
Voltage: 240V
Speed: 2850rpm
Weight: 18.5Kgs
Thread Size: 5/8 BSW
Switch: NVR Switch

The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.

• EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
• VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
• ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
• QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
• 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.

• 48″ x 4″ wide (1220 x 100mm) belt.
• 7″ (178mm) diameter disc.
• 3 1/2″ (89mm) diameter rubber contact wheel.
• 5 1/2″ (140mm) diameter drive wheel.
• The 484 suits most popular 8″ bench grinders with a screw mounted wheel guard and a minimum of 1 HP.
• Suits shaft sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″.
• Fitting Kit supplied.
• NOTE: This is an attachment only.

The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.

• EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
• VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
• ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
• QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
• 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.

• 48″ x 2″ (1220 x 50mm) belt
• 7″ (178mm) diameter disc
• 8″ (200mm) diameter rubber contact wheel
• 5 1/2″ (140mm) diameter drive wheel
• Suits most 8″ or 10″ bench grinders with a screw mounted wheel guard and a minimum of 3/4 HP
• Suits grinder shaft sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″
• Fitting Kit supplied

The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.

• EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
• VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
• ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
• QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
• 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.

• 48″ x 2″ (1220 x 50mm) belt.
• 7″ (178mm) diameter disc.
• 3 1/2″ (89mm) diameter rubber contact wheel.
• 5 1/2″ (140mm) diameter drive wheel.
• The 482 suits most popular 8″ bench grinders with a screw mounted wheel guard and a minimum of 1/2 HP, though 3/4 HP is recommended.
• Suits shaft sizes of 5/8″ and 1/2″. A steel bush is supplied to adapt the drive wheel to 1/2″.
• Fitting Kit supplied.

Combine the robust PO200HD MULTITOOL 200mm Bench Grinder with one of Australia’s leading belt grinding attachments PO362.

PO200HD

• Powerful; 750W (1HP) induction motor
• Cast iron body and base for long lasting performance
• Capacitor start / run motor
• NVR safety switch
• Large eye shield for added user safety
• Heavy-duty tool rests
• Fully Assembled

PO362
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.

• EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
• VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
• ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
• QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.

 

• 36″ x 2″ (915 x 50mm) belt – 100 Grit
• 7″ (178mm) diameter disc – 120 Grit
• 3 1/2″ (89mm) diameter rubber contact wheel
• 5 1/2″ (140mm) diameter drive wheel

Combine the robust TM400-150 ITM 150mm Bench Grinder with one of Australia’s leading belt grinding attachments PO362.

TM400-150

• Powerful 370W Induction Motor.
• 25mm width grinding wheels
• Cast iron body and base for long lasting performance.
• Vibration absorbing pads on base for smoother running.
• Capacitor Start-Run motor for maximum performance.
• Fully adjustable tool rests for ease of use and maximum user control.
• Large eyes shield for increased user safety.

PO362
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.

• EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
• VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
• ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
• QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
• 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.

• 36″ x 2″ (915 x 50mm) belt – 100 Grit
• 7″ (178mm) diameter disc – 120 Grit
• 3 1/2″ (89mm) diameter rubber contact wheel
• 5 1/2″ (140mm) diameter drive wheel

Combine the robust TM400-200 ITM 200mm Bench Grinder with one of Australia’s leading belt grinding attachments PO362.

TM400-200

• Powerful 600W Induction Motor.
• 25mm width grinding wheels
• Cast iron body and base for long lasting performance.
• Vibration absorbing pads on base for smoother running.
• Capacitor Start-Run motor for maximum performance.
• Heavy Duty tool rests for maximum user control.
• Large eyes shield for increased user safety.

PO362
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.

• EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
• VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
• ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
• QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.

TM400-200

• Motor Power: 600W
• Speed: 2980RPM
• Wheel Size: 200mm x 25mm
• Spindle Thread: M16 x 2mm
• Weight: 16.7kg

PO362

• 36″ x 2″ (915 x 50mm) belt – 100 Grit
• 7″ (178mm) diameter disc – 120 Grit
• 3 1/2″ (89mm) diameter rubber contact wheel
• 5 1/2″ (140mm) diameter drive wheel
• Suits most 150mm & 200mm bench grinders with a minimum of 1/3 HP motor and screw mounted guards

Combine the robust TM400-250 ITM 250mm Bench Grinder with one of Australia’s leading belt grinding attachments PO364.

TM400-250

• Powerful 900W Induction Motor.
• 25mm width grinding wheels
• Cast iron body and base for long lasting performance.
• Vibration absorbing pads on base for smoother running.
• Capacitor Start-Run motor for maximum performance.
• Heavy Duty tool rests for maximum user control.
• Large eyes shield for increased user safety.

PO364
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.

• EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
• VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
• ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
• QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
• 3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.

• 36″ x 4″ wide (915 x 100mm) belt.
• 7″ (178mm) diameter disc.
• 3 1/2″ (89mm) diameter rubber contact wheel.
• 5 1/2″ (140mm) diameter drive wheel.

A fast, inexpensive & accurate way to notch pipe & tubing between 30° & 90° angles.

Smooth, high output motor.
Platen grinding surface.
Low vibration running is achieved by the extra heavy duty robust construction, with sturdy workbase, & 14mm thick plate mainframe.
Stainless steel fastenings.
Emergency stop NVR safety switch.
Package includes:.
– Pipe Notching Machine.
– Roller t/s 20mm N.B Pipe.
– Roller t/s 25mm N.B Pipe.
– Roller t/s 32mm N.B Pipe.
– Roller t/s 40mm N.B Pipe.
– Roller t/s 50mm N.B Pipe.
– Grinding Belt.
– Toolbox

Motor: 2.2KW Singe Phase 240V
Flat Surface: 590 x 100mm
Grinding Belt: 2000 x 100mm
Vice: 30° – 90° Swivel Vice
Pipe: O.D Capacity 17 – 70mm
Weight: 170kg

Premium Bench Grinder Stand for use with TM400-150, TM400-200, TM400-250, TM402-200

Height: 840mm
Weight: 14kg