Electrical & Electronics
Showing 37–50 of 50 results
-
Potting & EncapsulationCHEMTOOLS Rapidstick™ Silicone Potting Compound
Rapidstick™ Silicone Potting Compound is a room temperature curing RTV rubber which features excellent electrical insulation, high moisture resistance, and a wide temperature range of -60°C to 300°C. Being of relatively low viscosity, it allows complete encapsulation for weather-proofing and mechanical shock protection, and is non-corrosive to copper.
Silicone Potting Compound arrives in a two-part kit – Part A (Resin) and Part B (Hardener) – both parts of which are easily combined at a ratio of 1:1 (by volume). Mixing and application may be performed manually or mechanically, with the cured elastomer drying opaque and moderately hard.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Epoxy & RepairCHEMTOOLS Rapidstick™ Surface Mount Epoxy (Red)
Rapidstick™ Surface Mount Epoxy is an easy-to-use one-part epoxy adhesive, specially designed for electronic assemblies. It bonds surfaces of mounted devices to printed circuit boards prior to double-sided reflow or wave solder assembly, and is ideally suited to printing a range of dot heights with one stencil thickness, and where high wet strength characteristics and high print speeds are necessary.
Surface Mount Epoxy has rapid thermal cure properties, robust handling characteristics, and is formulated to resist shear thinning. The viscosity and surface tension prove ideal for high speed placement equipment.
SME offers excellent adhesion to metal, ceramics, and glass-filled epoxy surfaces, and is suitable for all open squeegee and enclosed head stencil printing systems.
Specifications (refer to TDS for full details)
- Colour: Red
- Viscosity: 600 – 1,000 Thixotropic
- Specific Gravity: 113
- Boiling Point: > 260°C
- Tensile Strength: 11,500 psi
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CleanersCHEMTOOLS Screen-Kleen M Stencil Cleaner
Screen-Kleen M Stencil Cleaner
Screen-Kleen M Stencil Cleaner is an effective and economical solvent blend, formulated to be completely compatible with all commonly used solder pastes. It offers a fast evaporation rate, and dries without leaving any residue.
Unlike other hand applied stencil cleaners, Screen-Kleen M helps to reduce solder paste dry-out while enhancing its release from even the finest apertures. This extends the on-screen life of the solder paste, allowing for a greater number of prints between cleaning.
Screen-Kleen M is chlorine-free and free of halogenated solvents. Its use will reduce the risk of print defects, such as smears and bridging, without interfering with the soldering process.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Production & ReworkCHEMTOOLS Solder Wick/Braid – No Clean
Solder Wick, also known as ‘Solder Braid’ or ‘Desoldering Wick’, is RoHS compliant and can be used with leaded and lead free rework. It is used most often in the rework and repair of circuit boards within computers, cell phones, or other electronics. It allows the user to remove excess solder from components or pads on the circuit board without leaving any residues behind. Chemtools Solder Wick products maximise thermal conduction and solder retention.
Solder Wick is made with an oxide-free copper braided into a weave configuration. Immediately after braiding, the wick is cleaned in an environmentally friendly process. Every precaution is taken to ensure that the braid remains oxide-free until it is coated through a proprietary fluxing process using pure type ‘R’ resin flux conforming to all the requirements of Mil-F14256F, Type ‘R’, as well as ANSI/J-STD-004.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
AerosolCHEMTOOLS Spot It Survey & Spot Marking Paint (Fluro Colours)
Spot It Survey & Spot Marking Paint is designed to withstand the harshest of weather conditions. It contains a special resin and pigment system to provide long-term durability, and can be used on timber, steel, concrete, asphalt, brick, soil, turf, and more.
Designed for optimum performance, Spot It can be used for long periods without clogging, while providing the best quality paint in terms of colour visibility, retention, and durability, leaving a lasting mark on surfaces for up to six months*.
*Note: Visibility varies with traffic and exposure
Features & Benefits:
– Touch dry in 5 minutes
– Marking is visible for up to 6 mths
– Non-freezing (operational to -10°C)
– No added lead or chlorinated solvents
– Non-clogging can empties completely
– High delivery for faster and better coverage
– Designed for inverted use(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Electrical ConsumablesCHEMTOOLS Tap-N-Cool Straight Cutting Compound
Tap-N-Cool Straight Cutting Compound
Tap-N-Cool Straight Cutting Compound is a soft, non-staining, metal working paste with long lasting high performance, high film strength, and extreme pressure (EP) additives. Its anti-corrosive, anti-wear formula rapidly reduces and dissipates heat without producing noxious fumes, while improving the dimensional stability of all metal surfaces, inclusive of yellow metals.
SCC is formulated from solvent refined mineral oils for an unsurpassable finish. Its lanolin-base ensure a rust-free environment to extend the life of hand tools and heavy duty power tools.
Straight Cutting Compound is non-toxic and biodegradable, making it safe for both the user and the environment.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cutting Fluids & PastesCHEMTOOLS Tap-N-Cool Straight Cutting Fluid
Tap-N-Cool Straight Cutting Fluid
Tap-N-Cool Straight Cutting Fluid is a high performance, light to medium duty neat oil containing solvent refined mineral oils and extreme pressure (EP) additives. It provides an excellent surface finish with great anti-wear properties and high corrosion inhibition for a rust-free environment – essential for maximising the life of machine tools and finished parts.
SCF is formulated with specialised functional chemistry to minimise misting, and is free flowing for rapid dissipation of heat from metal removal and forming operations. It is non-flammable, non-staining, and recommended for all metal types, both ferrous and non-ferrous.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Production & ReworkCHEMTOOLS TC-2 Tip Tinner
TC-2 Tip Tinner is a highly active, high strength tinner for use when soldering tip plating has oxidised, turned black, and become unusable. It is commonly used for solder tip tinning and cleaning in most electronic manufacturing and repair facilities.
TC-2 is conveniently packaged in a round metal container and comes with a double sided foam adhesive pad on the underside.
(0 reviews) -
Electrical ConsumablesCHEMTOOLS Thermalle™ CARBOVOLT Carbon Conductive Grease
Thermalle™ CARBOVOLT Carbon Conductive Grease
Thermalle™ CARBOVOLT Carbon Conductive Grease is formulated with a carbon-based additive to provide excellent conductivity and lubrication. It is an economical low-cost mechanical and thermal conductor for irregular or pitted surfaces and loose or vibrating parts. CARBOVOLT will protect closed switches from corrosion, prevent the formation of oxides, sulphides, and other corroding deposits on copper and aluminium surfaces, improve the connection between worn contacts and non-moving mating surfaces, and reduce arcing hot spots.
CARBOVOLT relies on a proprietary carbon filler rather than traditional metallic particles for electrical conductivity. It is typically used as a ground and is particularly useful when trying to drain static electricity away from moving objects, from low micro-power electronics through to high voltage switchgear.
Non-hardening and non-melting with a high resistance to water washout, CARBOVOLT offers a board service temperature range with continuing lubrication, and low bleed and evaporation. It is ideal for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors, and potentiometers.
CARBOVOLT is commonly used in the electronics, automotive, and aerospace industries.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Electrical ConsumablesCHEMTOOLS Thermalle™ ELECTRASEAL-COPPER Electrical Jointing Compound
Thermalle™ ELECTRASEAL-COPPER Electrical Jointing Compound
Thermalle™ ELECTRASEAL-COPPER Electrical Jointing Compound is a no-set, no-flow, non-drying pliable compound for improving electrical connections between copper conductors. It provides excellent, reliable, and long-lasting electrical conductivity, corrosion protection from oxidation, and high resistance to water, moisture, dust, and other negative environmental factors.
ELECTRASEAL-COPPER is formulated with a solvent refined mineral oil base and is non-flammable and non-toxic. It is ideal for use in a wide range of applications including power distribution systems, telecommunication networks, underground cabling, electrical equipment and components, and many other industrial installations.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Electrical ConsumablesCHEMTOOLS Thermalle™ ELECTRASEAL-NICKEL Electrical Jointing Compound
Thermalle™ ELECTRASEAL-NICKEL Electrical Jointing Compound
Thermalle™ ELECTRASEAL-NICKEL Electrical Jointing Compound is a high quality no-set, no-flow, non-drying compound formulated for use on aluminium-to-aluminium and aluminium-to-copper pad-to-pad or palm-to-palm joints. It has a mineral oil base and remains pliable, even at low temperatures, allowing for easy joint disassembly and reassembly.
ELECTRASEAL-NICKEL is formulated with highly conductive materials that ensure low resistance electrical connections continue with excellent conductivity. It is water resistant and will stop corrosion from forming when in the presence of moisture caused by environmental factors.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Electrical ConsumablesCHEMTOOLS Thermalle™ ELECTRASEAL-ZINC Electrical Jointing Compound
Thermalle™ ELECTRASEAL-ZINC Electrical Jointing Compound
Thermalle™ ELECTRASEAL-ZINC Electrical Jointing Compound is a high quality no-set, no-flow, non-drying compound formulated for use on aluminium-to-aluminium and aluminium-to-copper bolted and compression settings. It has a mineral oil base and remains pliable, even at low temperatures, allowing for easy joint disassembly and reassembly.
ELECTRASEAL-ZINC is formulated with highly conductive materials that ensure low resistance electrical connections continue with excellent conductivity. It is water resistant and will stop corrosion from forming when in the presence of moisture caused by environmental factors.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Electrical ConsumablesCHEMTOOLS Thermalle™ SUB-ZERO Silicone Thermally Conductive Grease (Heatsink Compound)
Thermalle™ SUB-ZERO Silicone Thermally Conductive Grease (Heatsink Compound)
Thermalle™ SUB-ZERO Silicone Thermally Conductive Grease is a high-performance non-flowing thermal interface material for use in electronic applications that require efficient heat transfer without concern of corroding elements. It is formulated with a silicone base and high-quality thermally conductive fillers to provide excellent conductivity and stability over a wide temperature range across all heat generating devices.
SUB-ZERO is a non-corrosive viscous paste displaying low bleed for long lasting performance and suitability across a wide range of materials. It is commonly used in computer processors, graphics cards, power supplies, and lighting systems, and can be found in the automotive industry applied to engine control units, power steering systems, and transmission control modules.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Electrical ConsumablesCHEMTOOLS Vio-Flux High Activity Liquid Flux
CT-VF Vioflux High Activity Industrial Liquid and Paste Fluxes
Vioflux is a general purpose acid based flux which is formulated for use with Stainless Steel, Monel, High-Chrome Alloys, Inconel, Nickel, Copper, Brass, Ferrous Alloys, soft metals and many more. The blend of acids used make this flux active at room temperature where it begins to clean metals and remove oxides. The flux exerts a strong scavenging action to remove oxide coatings and other impurities from the metal surface to produce strong joints.
It is available in liquid and paste form.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page