Industrial Equipment & Supplies
Showing 865–900 of 4164 results
-
Hole Saws & KitsBORDO TCT Sheet Metal Cutters XP2 Deep Cut Pilot Drills
- XP2 TCT Sheet Metal Cutter Pilot Drill
- Pilot Drill – 6mm x 47mm to suit XP2 Tungsten Carbide Hole Cutters
(0 reviews) -
Hole Saws & KitsBORDO TCT Sheet Metal Cutters XP2 Deep Cut Sets
- 16-40mm 9 Pce XP2 TCT Deep Cut Hole Saw Set
- XP2 Sheet metal cutter set 16, 20, 25, 32, 40
- This kit features 5 x 1-piece XP2 Carbide Cutters in a tough case.
- TCT hole saws are ideal for repetition cutting in steel plate, stainless steel plate and synthetic resin plates up to 4mm thick.
- They feature 3 edged cutters which balance the cutting effort for smoother boring, greater control and reduced drag.
- The deep body makes them ideal for use with curved surfaces such as metal pipes.
- Non-uniform separation of the tungsten carbide teeth and integrated mandrel virtually eliminates vibration due to resonance.
- Extremely long service life.
- No need for messy cutting fluids.
- Heavy duty plug ejector spring.
- Ideal for repetition cutting of steel plate, stainless steel plate, sheet metal and other hard or abrasive materials.
(0 reviews) -
Hole Saws & KitsBORDO Thinwall BM Sheetmetal Hole Saw
- Thinwall Sheetmetal Hole Saws are ideal for the electrical and plumbing tradesman.
- Each hole saw has a thin 0.65mm sidewall blade thickness, which allows for faster cutting and longer battery life.
- Lightweight blades maximize the use of chargeable impact drivers by using a reduced motor and operation load.
- M42 material with special variable pitch tooth design for smoother cuts in sheet metal.
- Self ejecting plug removal.
- 5/32″ pilot drill for easy centre locating and quicker cutting penetration.
- 1/4″ quick change shank, ideal for use with battery operated impact drivers.
- Safety collar stop helps prevent cutting too deep.
- Smooth and fast cutting – especially designed tooth geometry assures increased performance and better wear resistance.
- Safety collar stop helps prevent damage to wires when drilling into electrical boxes.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO Thinwall BM Sheetmetal Hole Saw Kits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareBORDO Thread Adaptor Set
- Thread Adaptor Set
- For adapting M14x2.00 threaded brushware to M10x1.25 or M10x1.5 threaded spindles on small angle grinders.
- M14 X 2 to M10 x 1.25
- M14 X 2 to M10 x 1.50
(0 reviews) -
Depth Gauges & IndicatorsBORDO Thread Pitch Gauges
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Tungsten Carbide Deck Bit
- Tungsten Carbide Tipped 90° Dual Blade Countersink with 3.0mm TCT Pilot Drill.
- Bordo Deck Bits are fully adjustable to suit your specific fastener, timber species or custom application.
- Pilot drill hole to suit 10G screws.
- Prevents decking timber splitting.
- Adjustable, free spinning, non-marking collar.
- Wide gullets prevent the jamming and clogging of wood chips.
- Large gullets also provide an unobscured view of the operation.
- Replaceable HSS pilot drill.
- Heavy duty hex shank ensures maximum torque transfer & eliminates chuck slip.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO Tungsten Carbide Grit Edge Downlight Cutters
- The tungsten carbide Grit-Edge on each Bordo Downlight Cutter provides an extremely hard wearing, smooth cutting edge – even in the most abrasive materials.
- Thousands of carbide particles are permanently bonded to the cutting edge precisely for specific cutting and drilling needs.
- No teeth to dull or chip.
- High heat and abrasion resistance.
- Resists snagging.
- Smooth cutting.
- High wear resistance.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO Tungsten Carbide Grit Edge Hole Saw
- The tungsten carbide Grit Edge on each Grit Edge product equips it to handle the toughest materials, from ceramic tile to marble and glass.
- Thousands of carbide particles are permanently bonded to the cutting edge precisely for specific cutting and drilling needs.
- 29mm (1-1/8″) depth of cut.
- No teeth to dull or chip.
- High heat and abrasion resistance.
- Resists snagging.
- Smooth cutting.
- High wear resistance.
- 5mm (3/16″) thick heavy duty backing plate eliminates the need for drive plate.
- Uses standard hole saw mandrel, usually in conjunction with carbide tipped pilot drill.
- Recommended for cutting laminates, fibreglass, ceramic tile, marble and slate, cast iron, fibre cement sheet and composites.
- Not suitable for monocottura or vitrified products – these products are best cut by Bordo Brilliant diamond hole saws.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Saw BladesBORDO Tungsten Carbide Tipped
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Tungsten Carbide Tipped Countersink Drills
- High performance HSS-Co5 (Cobalt) drill with Tungsten Carbide Tipped (TCT) countersink.
- Achieves accurate countersinking depths of 2mm, 4mm or 6mm.
- Depth stops are sold separately in sets of 3 – Part # 2202-3ST.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Tungsten Carbide Tipped Hex Shank Ceramic Tile Drill
- These Rotary Only ceramic tile drills provide outstanding performance and extended tool life in hard ceramic materials.
- They feature a unique cutting edge geometry in conjunction with high temperature brazing to ensure reliable and accurate drilling in multiple hole applications.
- Use of water cooling will extend bit life.
- Although these drill bits are not recommended for drilling vitrified porcelain, their superior multi-facet tungsten carbide tip enables them to drill most materials of this type, albeit with a reduced tool life.
- Specifically engineered for use in impact drivers these bits are also fully compatible with conventional rotary drills.
- 1/4″ hex shank facilitates fast tool loading in cordless impact drivers and quick change adaptors.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Tungsten Carbide Tipped Hex Shank Ceramic Tile Drill Set
- Tungsten Carbide Tipped Hex Shank Ceramic Tile Drill Set
- These Rotary Only ceramic tile drills provide outstanding performance and extended tool life in hard ceramic materials.
- They feature a unique cutting edge geometry in conjunction with high temperature brazing to ensure reliable and accurate drilling in multiple hole applications.
- Use of water cooling will extend bit life.
- Although these drill bits are not recommended for drilling vitrified porcelain, their superior multi-facet tungsten carbide tip enables them to drill most materials of this type, albeit with a reduced tool life.
- Specifically engineered for use in impact drivers these bits are also fully compatible with conventional rotary drills.
- 1/4″ hex shank facilitates fast tool loading in cordless impact drivers and quick change adaptors.
(0 reviews) -
Drill Bits & SetsBORDO Universal Drill Set
- 4-10mm 5 Pce Universal Drill Set
- DIN 8039/ISO 5468
- Special cutting edge geometry.
- Diamond-ground titanium carbide tip.
- Universal drill bit with asymmetric spiral shape.
- Cutting drilling spiral for optimum spoil removal.
- Straight flute entry.
- High-temperature brazing at 1120°C.
- Specially ground cutting helix with micro surface hardness.
- For use in Masonry Natural Stone Artificial Stone Ceramics Steel / Metal Wood / PVC / Acrylic Glass Tiles, Hard burnt brick.
- Not for hammer action.
(0 reviews) -
Drill Bits & SetsBORDO Universal Drills
- DIN 8039/ISO 5468
- Special cutting edge geometry.
- Diamond-ground titanium carbide tip.
- Universal drill bit with asymmetric spiral shape.
- Cutting drilling spiral for optimum spoil removal.
- Straight flute entry.
- High-temperature brazing at 1120°C.
- Specially ground cutting helix with micro surface hardness.
- For use in Masonry Natural Stone Artificial Stone Ceramics Steel / Metal Wood / PVC / Acrylic Glass Tiles, Hard burnt brick.
- Not for hammer action.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutters & SetsBORDO Universal Shank HSS Drill
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Water Feed Drilling Template with Suction
- Water Feed Drilling Template with Suction
- Drilling Template 4-13mm
- The Bordo heavy duty drilling template fixes securely to any smooth surface with a simple lever actuated suction function.
- The template has two conveniently positioned spigots for attaching a pressure bottle water feed.
- The 2715-DT template is suitable for use with drills from 4 to 13mm.
(0 reviews) -
BrushwareBORDO Wheel Brush 316 Stainless Wire High Speed
- High Speed wheel brushes are used for industrial applications where space is an issue.
- These brushes are typically used with a high speed hand-held tool, such as a die grinder, for applications including cleaning, polishing, deburring and surface preparation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareBORDO Wheel Brush Brass Wire High Speed
- 70mm 0.3mm Brass Wire High Speed Crimp Wire Wheel Brush
- 1/4″ round spindle, Brass Wire
- High Speed wheel brushes are used for industrial applications where space is an issue.
- These brushes are typically used with a high speed hand-held tool, such as a die grinder, for applications including cleaning, polishing, deburring and surface preparation.
(0 reviews) -
BrushwareBORDO Wheel Brush Steel Wire High Speed
- High Speed wheel brushes are used for industrial applications where space is an issue.
- These brushes are typically used with a high speed hand-held tool, such as a die grinder, for applications including cleaning, polishing, deburring and surface preparation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO White Band HSS-Co TiAlN Cast Iron Drilling
- Bordo Metric White Band HSS-Co TiAlN Coated Twist Drills for Cast Iron.
- DIN338
- 118° / 70° DX point with two helical flutes with 33 degrees of helix angle.
- A highly abrasive material with damping and thermal conductivity, high strength and resistance to wear. Cast Iron is used extensively for mass produced components.
- The White Band Series is designed for this specific purpose. TiAlN coating increases tool surface hardness to 87Rc.
- For machining materials with Hardness < 300 HB : Tensile Strength <10900 N/mm2.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO White Band TiAlN Coated Cast Iron Tapping Spiral Flute
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Wire Gauge Bright Finish HSS Jobber Drill
- Bordo Wire Gauge Quick Silver M2-HSS Twist Drills.
- 118° Standard Chisel Point
- Chisel point is ideal for general purpose drilling.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
- Gauge size drill calculations are generally made utilising a reference book or table.
- For example, to drill a hole which is 10 thou (thousandth of an inch = .001) bigger than a 1/8″ bolt, the user must first work out that 1/8″ is 125 thou, so the required hole size is 135 thou. Using a reference table establishes that you would need a number 29.
- Number drill bit gauge sizes are analogous to, but different from, American wire gauge.
- Number gauge is most commonly used from size 80 (the smallest) to size 1 (the largest) followed by letter gauge size A (the smallest) to size Z (the largest).
- Number gauge is actually defined down to size 97, but these smallest sizes are very rarely used.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Wire Gauge Bright Finish HSS Jobber Drill Set
- Bordo Wire Gauge Quick Silver M2-HSS Twist Drills.
- 118° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- 118° point angles are ideal for use in materials such as mild steel and cast iron.
- The 118° point creates easily controlled chips which are wide and thin.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
- Gauge size drill calculations are generally made utilising a reference book or table.
- For example, to drill a hole which is 10 thou (thousandth of an inch = .001) bigger than a 1/8? bolt, the user must first work out that 1/8? is 125 thou, so the required hole size is 135 thou. Using a reference table establishes that you would need a number 29.
- Number drill bit gauge sizes are analogous to, but different from, American wire gauge.
- Number gauge is most commonly used from size 80 (the smallest) to size 1 (the largest) followed by letter gauge size A (the smallest) to size Z (the largest).
- Number gauge is actually defined down to size 97, but these smallest sizes are very rarely used.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Yellow Band HSS Aluminium Drilling
- Bordo Metric Yellow Band HSS Twist Drills for Aluminium and its alloys.
- DIN338
- 130° web thinned point with two helical flutes with 35 degrees of helix angle.
- The alloying elements which achieve varying Aluminium Alloys have an effect on the machining properties of these materials.
- This generally creates a difficult long chip formation and material which has tendencies to stick to the tool, placing a unique set of demands on tooling. Yellow Band Series contends with these difficulties.
- For machining materials with Hardness < 200 HB : Tensile Strength <700 N/mm2.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO Yellow Band HSS Aluminium Tapping Roll Form
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO Yellow Band HSS Aluminium Tapping Spiral Flute
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO Yellow Band HSS Aluminium Tapping Spiral Point
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Tapes & SignageCCI Duct Tape
CCI premium PVC Duct Tape is manufactured with a strong natural rubber adhesive backing that enables it to seal and join on wide variety of surfaces.
It is also Risk of Hazardous Substances compliant (ROHS), so it is Lead free and doesn’t contain Cadmium or Mercury.Available in boxes of 60 in Black or Silver – 48mm x 30m – 130um thick
Ideal for sealing & joining concreters builders film, strapping and bundling applications, flexible ducting and plumbing applications.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Dispensing, Caulking & Sausage GunsCHEMTOOLS 1:1 & 2:1 Dual Component 400ml Cartridge Dispensing Gun
Industrial Grade. Portable and lightweight, yet robust. Solid plastic casing with steel piston arms.
Ideal applicator where air supply is not available. Easy to load, slide in & slide out cartridge insertion system.
For medium to high viscosity cartridges.
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS 10:1 Dual Component 490ml Cartridge Dispensing Gun
Industrial Grade. Portable and lightweight, yet robust. Solid plastic casing with steel piston arms.
Ideal applicator where air supply is not available. Easy to load, slide in & slide out cartridge insertion system.
For medium to high viscosity cartridges.
Compatible with Rapidstick™ 8-420 Structural Adhesive (All Substrates)
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS 10cc Single Component Dispensing Gun
Ergonomic, robust, lightweight and portable design. Replaces traditional methods of dispensing, such as manual syringes and squeeze bottles. Ideal for potting, lines, or dots.
7:1 ratio leverage. Spring reverse function prevents dripping. Allows easy, accurate, metered shots of medium to thick viscosity materials such as pastes, sealants, silicones, gels, epoxies, compounds, fluxes, greases, and RTV silicones.
Fits disposable barrels and pistons. Compatible with most industrial syringes.
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS 30cc & 55cc Single Component Dispensing Gun
Ergonomic, robust, lightweight and portable design. Replaces traditional methods of dispensing, such as manual syringes and squeeze bottles. Ideal for potting, lines, or dots.
7:1 ratio leverage. Spring reverse function prevents dripping. Allows easy, accurate, metered shots of medium to thick viscosity materials such as pastes, sealants, silicones, gels, epoxies, compounds, fluxes, greases, and RTV silicones.
Fits disposable barrels and pistons. Compatible with most industrial syringes.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCHEMTOOLS AutoChem™ Battery Terminal Protector
Waterproofs & Shields from Acids | Improves Electrical Conductivity
AutoChem™ Battery Terminal Protector provides a dry, non-tacky, non-chlorinated, and lead-free barrier to stop corrosion forming on battery terminals, cable connectors, and metal contacts. It dries to a flexible blue coating and forms an airtight durable seal for superior resistance to acids, moisture, salt spray,
and mechanical soils without sagging, running, peeling, or cracking under high temperatures or over time.Battery Terminal Protector improves electrical conductivity, extending the life of all battery types used over land or sea, and is ideal for maintaining optimal battery condition during periods of long-term storage.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCHEMTOOLS AutoChem™ Engine Starting Fluid
For All Petrol & Diesel Engines | Corrosion Protection for up to 6 Months
AutoChem™ Engine Starting Fluid is formulated for use on all 2- and 4-stroke petrol and diesel combustion engines, enabling reliable cold starting in damp weather, after long periods of engine downtime, and at low temperatures. It provides long-term corrosion protection for up to 6 months in outdoor environments by leaving a clear surface film which can be easily removed if required.
Engine Starting Fluid can be used on engines up to 200°C, and is suitable for use in extreme weather on motor vehicles, motorcycles, trucks, marine engines, mining equipment, tractors
and mowers, and other gardening or farming equipment.(0 reviews)
