Industrial Equipment & Supplies
Showing 829–864 of 7019 results
-
Milling CuttersBORDO Slot Drills Ball Nose Metric Long – Threaded
- HSS-Co8 (Cobalt) centre cutting, long threaded, ball nose
- Sometimes referred to as ball cutters, or ball nose end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling soft steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling CuttersBORDO Slot Drills Ball Nose Metric Short – Plain Flatted
- HSS-Co8 (Cobalt) centre cutting, short flatted, ball nose
- Sometimes referred to as ball cutters, or ball nose end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling soft steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling Cutters
BORDO Slot Drills Ball Nose Metric Short – Threaded
- HSS-Co8 (Cobalt) centre cutting, short threaded, ball nose
- Sometimes referred to as ball cutters, or ball nose end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling soft steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling CuttersBORDO Slot Drills Fractional Long – Threaded
- HSS-Co8 (Cobalt) centre cutting, long threaded, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling CuttersBORDO Slot Drills Fractional Short – Threaded
- HSS-Co8 (Cobalt) centre cutting, short threaded, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Milling CuttersBORDO Slot Drills Fractional Short – Threaded 6 Piece Set
- 6 Piece Fractional Short Threaded Slot Drill Set
- HSS-Co8 (Cobalt) centre cutting, short threaded, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews) -
Slot DrillsBORDO Slot Drills Metric Long – Plain Flatted
- HSS-Co8 (Cobalt) centre cutting, long flatted, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Slot DrillsBORDO Slot Drills Metric Long – Threaded
- HSS-Co8 (Cobalt) centre cutting, long threaded, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Slot Drills
BORDO Slot Drills Metric Short – Plain Flatted
- HSS-Co8 (Cobalt) centre cutting, short flatted, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Slot DrillsBORDO Slot Drills Metric Short – Plain Flatted 6 Piece Set
- 6 Piece Metric Short Flatted Slot Drill Set
- HSS-Co8 (Cobalt) centre cutting, short flatted, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews) -
Slot Drills
BORDO Slot Drills Metric Short – Threaded
- HSS-Co8 (Cobalt) centre cutting, short threaded, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Slot Drills
BORDO Slot Drills Metric Short – Threaded 6 Piece Set
- 6 Piece Metric Short Threaded Slot Drill Set
- HSS-Co8 (Cobalt) centre cutting, short threaded, square end
- Sometimes referred to as two flute end mills.
- For general milling operations – creating slots and cavities.
- Commonly used when milling steels and non-ferrous materials that produce large chips.
- Fewer flutes are best for chip evacuation, keeping the bit cooler, but leave a rougher surface finish.
(0 reviews) -
Drill Bits & SetsBORDO Solid Core Extensions
- 1/4″ x 75mm Standard Magnetic Bit Holder – Clam
- The Bordo range of magnetic bit holders feature powerful magnets.
- Suitable for use with all 1/4″ 25mm insert bits.
(0 reviews) -
Drill Bits & SetsBORDO Solid Core Long
- High carbon steel solid core auger bits.
- The Bordo range of solid core auger bits are available in short, medium and long series OALs.
- Fully heat treated to increase durability and protect against bending in heavy duty drilling applications.
- Single spur scribes hole edge and ensures a smooth hole finish.
- Coarse screw point provides fast starting in all wood types.
- Solid centre design provides increased bit rigidity.
- Optimised flute grind ensures fast chip removal improving speed and finish.
- Hex shank ensures a positive lock in chucks and extensions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & Sets
BORDO Solid Core Medium
- High carbon steel solid core auger bits.
- The Bordo range of solid core auger bits are available in short, medium and long series OALs.
- Fully heat treated to increase durability and protect against bending in heavy duty drilling applications.
- Single spur scribes hole edge and ensures a smooth hole finish.
- Coarse screw point provides fast starting in all wood types.
- Solid centre design provides increased bit rigidity.
- Optimised flute grind ensures fast chip removal improving speed and finish.
- Hex shank ensures a positive lock in chucks and extensions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Solid Core Set
- 25mm Auger Bit and Extensions Set
- High carbon steel solid core auger bit extension set.
- The Bordo range of solid core auger bits are available in short, medium and long series OALs.
- Fully heat treated to increase durability and protect against bending in heavy duty drilling applications.
- Single spur scribes hole edge and ensures a smooth hole finish.
- Coarse screw point provides fast starting in all wood types.
- Solid centre design provides increased bit rigidity.
- Optimised flute grind ensures fast chip removal improving speed and finish.
- Hex shank ensures a positive lock in chucks and extensions.
(0 reviews) -
Drill Bits & Sets
BORDO Solid Core Short
- High carbon steel solid core auger bits.
- The Bordo range of solid core auger bits are available in short, medium and long series OALs.
- Fully heat treated to increase durability and protect against bending in heavy duty drilling applications.
- Single spur scribes hole edge and ensures a smooth hole finish.
- Coarse screw point provides fast starting in all wood types.
- Solid centre design provides increased bit rigidity.
- Optimised flute grind ensures fast chip removal improving speed and finish.
- Hex shank ensures a positive lock in chucks and extensions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Spade Bit 150mm
- Standard length 150mm Fast Cut Spade Bit
- Heavy Duty Fast Cut Spade Bits provide extreme performance in the toughest timbers.
- The Bordo range of standard length (OAL 150mm) spade bits are ideal for creating holes in a wide variety of timbers.
- Low cost per hole.
- Fast starting.
- Hex shank prevents slippage in drill chuck.
- Hex shank ensures a positive lock in spade bit extensions.
- Suits all standard quick change adaptors.
- Recommended speed 1500-2000 RPM.
- Ensure the back of the material being drilled is clear of electrical circuits, pipes, metal objects and any other hazardous objects.
- Do not use side to side movements when drilling.
- DO NOT USE HAMMER ACTION
- DO NOT USE FOR DRILLING METAL
- DO NOT EXCEED 2500 RPM
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & Sets
BORDO Spade Bit 405mm
- Extra Long 405mm Fast Cut Spade Bit
- Heavy Duty Fast Cut Spade Bits provide extreme performance in the toughest timbers.
- The Bordo range of standard length (OAL 150mm) spade bits are ideal for creating holes in a wide variety of timbers.
- Low cost per hole.
- Fast starting.
- Hex shank prevents slippage in drill chuck.
- Hex shank ensures a positive lock in spade bit extensions.
- Suits all standard quick change adaptors.
- Recommended speed 1500-2000 RPM.
- Ensure the back of the material being drilled is clear of electrical circuits, pipes, metal objects and any other hazardous objects.
- Do not use side to side movements when drilling.
- DO NOT USE HAMMER ACTION
- DO NOT USE FOR DRILLING METAL
- DO NOT EXCEED 2500 RPM
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Spade Bit Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Spot Weld Drills HSS-Co5
- HSS-Co5 (Cobalt) Spot Weld Drill.
- These drills are designed for removing spot welds and are especially useful for vehicle body repairs.
- The drills are designed to cut through existing spot welds, releasing damaged panels and enabling replacements to be fitted with minimum fuss.
- The HSS-Co5 material ensures a long bit life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Drill Bits & SetsBORDO Spotting Drills HSS-Co5
- HSS-Co5 (Cobalt) Titanium Aluminium Nitride Coated (TiAlN) Spotting Drill.
- Titanium Aluminium Nitride (TiAlN) coated High Speed Steel with 5% Cobalt.
- Violet/Grey colour.
- Spotting Drills have practically no flutes and are designed to be extremely rigid.
- They are used to create precise spot holes by making a small indentation in the workpiece that prevents the twist drill from wandering.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ExtractorsBORDO Square Screw Extractor
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ExtractorsBORDO Square Screw Extractor Set
- Square Screw Extractor 5 Piece Set Nos 1-5
- Chrome Molybdenum square screw extractor.
- Square screw extractors feature four sided sharp undercut edges to provide a solid grip and will not expand damaged fastener during extraction.
- They are ideally suited for removing broken bolts, studs & socket screws from medium to hard metals.
- Typically the required screw extractor will be approx. 2/3 the diameter of the fixing you are extracting.
- Use a centre punch to mark the centre of the fixing before drilling to prevent the drill bit wandering.
- Select a drill bit that is suitable for drilling into the specific material – typically HSS or HSS-Co5. Ideally the drill should be “Left Hand” which will prevent further tightening of the fixing during drilling.
- When using left hand drills ENSURE THE DRILL IS SET TO REVERSE.
- Drill pilot hole in centre of broken bolt, screw or stud.
- Lightly tap screw extractor into hole and turn anti-clockwise with a tap wrench or spanner.
- Damaged bolt, screw or stud will unwind out of the hole.
- Avoid excessive lateral loads – breakage could result.
- Wear eye and hearing protection.
(0 reviews) -
BrushwareBORDO Stainless Steel Crimp Wire Bevel Brush
- 100mm 0.30mm Crimp Wire Bevel Brush
- Steel Wire – Multi-bore crimp wire bevel brushes have a M14 X 2.00 thread and are supplied with a M10 X 1.50 adaptor.
- Crimp wire bevel brushes are designed for use with electric or pneumatic high speed grinders for removing scale, rust, and paint, and other surface preparation including deburring and polishing.
- They are ideal for hard to reach areas including internal edges and corners.
- Crimp wire brushes are not as aggressive as their twist knot equivalents.
- These brushes are constructed using hi-tensile wire to ensure superior performance and a long life.
(0 reviews) -
BrushwareBORDO Stainless Steel Crimp Wire Cup Brush
- 75mm 0.30mm Stainless Steel Crimp Wire Cup Brush
- 316 Stainless Steel Crimp Wire
- Bordo crimp wire cup brushes are designed for use with electric or pneumatic high speed grinders for removing scale, rust, and paint and other surface preparation including deburring and polishing.
- Crimp wire brushes are not as aggressive as their twist knot equivalents.
- These brushes are constructed using hi-tensile wire to ensure superior performance and a long life.
(0 reviews) -
BrushwareBORDO Stainless Steel Crimp Wire Wheel Brush
- Steel Wire
- Crimp wire wheel brushes are designed for use with electric or pneumatic high speed grinders as well as bench mounted electric grinders.
- They are ideal for for removing scale, rust, and paint, and other surface preparation including deburring and polishing.
- Crimped wire wheels are not as aggressive as their twist knot equivalents.
- These wheels are constructed using hi-tensile wire to ensure superior performance and a long life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareBORDO Stainless Steel Twist Knot Bevel Brush
- 316 Stainless Steel Wire – Twist knot bevel brushes with a M14x2.00 thread.
- Twist knot bevel brushes are designed for use with electric or pneumatic high speed grinders for heavy duty cleaning of hard to reach areas including internal edges and corners.
- They are also ideal for the removal of weld scale, rust, old paint, and corrosion.
- These brushes are constructed using hi-tensile wire to ensure superior performance and a long life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cup - Twist KnotBORDO Stainless Steel Twist Knot Cup Brush
- 316 Stainless Steel Wire – Multi-bore twist knot cup brushes have a M14x2.00 thread and are supplied with a M10x1.50 adaptor.
- Bordo twist knot cup brushes are designed for use with electric or pneumatic high speed grinders for heavy duty cleaning of large surfaces, and also for removal of weld scale, rust, old paint, and corrosion.
- These brushes are constructed using hi-tensile wire to ensure superior performance and a long life.
- They are available with either carbon steel wire or stainless steel wire.
- Bordo twist knot cup brushes 100mm and over are bridle banded to reduce flare for a faster cutting action.
- Bands can easily be removed as the wire wears.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareBORDO Stainless Steel Twist Knot Wheel Brush
- 125mm 0.5mm Stainless Steel Twist Knot Wheel, 22.2mm bore
- 316 Stainless Steel Wire
- Twist knot wheel brushes are designed for use with electric or pneumatic high speed grinders as well as bench mounted electric grinders.
- They are ideal for heavy duty cleaning of large surfaces, and also for removal of weld scale, rust, old paint, and corrosion.
- These wheels are constructed using hi-tensile wire to ensure superior performance and a long life.
(0 reviews) -
Drill Bits & SetsBORDO Standard Fixing Straight Shank TCT Masonry Drill
- Standard fixing, straight shank, general purpose masonry drill.
- Premium grade tungsten carbide.
- High temperature brazing for longer bit life.
- Flutes designed for optimal spoil removal.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Standard Nutsetter
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Standard Nutsetter Flat
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Screwdrivers
BORDO Standard Nutsetter Impact Absorbing
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ScrewdriversBORDO Standard Nutsetter Set
- Nutsetter Set 5/16, 3/8 x 65mm
- Standard Nutsetters feature a small internal chamfer to facilitate quick screw engagement.
- The chamfer also reduces marking of the head-shoulder junction when using painted hex head screws.
- All Bordo Nutsetters are manufactured from premium heat treated alloy steel and feature powerful magnets.
- The universal 1/4″ hex shank is suitable for use in most power tools and quick change adaptors/extensions.
(0 reviews) -
BrushwareBORDO Steel Wire Crimp Wire Bevel Brush
- 100mm 0.30mm Stainless Steel Crimp Wire Bevel Brush
- 316 Stainless Steel Wire – Multi-bore crimp wire bevel brushes have a M14 X 2.00 thread and are supplied with a M10 X 1.50 adaptor.
- Crimp wire bevel brushes are designed for use with electric or pneumatic high speed grinders for removing scale, rust, and paint, and other surface preparation including deburring and polishing.
- They are ideal for hard to reach areas including internal edges and corners.
- Crimp wire brushes are not as aggressive as their twist knot equivalents.
- These brushes are constructed using hi-tensile wire to ensure superior performance and a long life.
(0 reviews)