DYMARK AutoTech Solvent Based Manhattan Kit 8L
Description: AutoTech Epoxy Floor Coating – Solvent Based
KIT COLOUR – MANHATTAN
- Resists hot tyre pick-up.
- Protects against oil stains, beads water and simply wipes clean.
- Seals and protects interior bare concrete floors with an easy one-coat application.
- Kit covers up to 40m².
Related products
-
EpoxiesCHEMTOOLS Rapidstick™ 8-250 15 Minute Epoxy (Slow Set, Flexible)
Rapidstick™ 8-250 15 Minute Epoxy
Rapidstick™ 15 Minute Epoxy is a high strength, versatile, non-shrinking, two-part dual syringe adhesive, which delivers equal parts of both the epoxy resin and the hardener with every use. When mixed, the reaction produces a tough, rigid bond in 15 minutes for quick project completion.
15 Minute Epoxy is ideal for metal and hard material bonding, as well as mold infusion. It can also be used for electronic parts insulation, moisture-proof potting, and privacy masking, and is compatible for use on a wide range of other materials as a gap filler or for surface repairs and laminating. Combining 15 Minute Epoxy with fibreglass cloth creates a durable patch, and tinting with earth pigments, cement, or sand allows colour matching. Once dry, it can be rubbed back and drilled.
15 Minute Epoxy is resistant to water and most common solvents, drying clear and making it perfect for transparent repairs, or projects that require invisible seams.
Recommended bonding surfaces include, but are not limited to:
- Metal
- Glass
- Ceramics
- Wood
- Rigid Plastics
- China
- Tile
- Fibreglass
- Concrete
- Stone
Specifications (refer to TDS for full details)
- Colour: Clear
- Base: Epoxy Resin / Polymercaptan Hardener
- Odour: Mild Amine
- Gel Time: 15 – 20 minutes
- Handling Time: 20 minutes
- Usable Strength (500 psi): 30 minutes
- Full Cure: 24 hours
- Cured Temperature Range (°C) Long-term Continuous Exposure: -23 to +49
- Cured Temperature Range (°C) Short-term Intermittent Exposure: -23 to +150
(0 reviews) -
CartridgesHOBSON E701 Epoxy
MOQ 12
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Epoxy & RepairCHEMTOOLS Rapidstick™ Surface Mount Epoxy (Red)
Rapidstick™ Surface Mount Epoxy is an easy-to-use one-part epoxy adhesive, specially designed for electronic assemblies. It bonds surfaces of mounted devices to printed circuit boards prior to double-sided reflow or wave solder assembly, and is ideally suited to printing a range of dot heights with one stencil thickness, and where high wet strength characteristics and high print speeds are necessary.
Surface Mount Epoxy has rapid thermal cure properties, robust handling characteristics, and is formulated to resist shear thinning. The viscosity and surface tension prove ideal for high speed placement equipment.
SME offers excellent adhesion to metal, ceramics, and glass-filled epoxy surfaces, and is suitable for all open squeegee and enclosed head stencil printing systems.
Specifications (refer to TDS for full details)
- Colour: Red
- Viscosity: 600 – 1,000 Thixotropic
- Specific Gravity: 113
- Boiling Point: > 260°C
- Tensile Strength: 11,500 psi
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
EpoxiesCHEMTOOLS Rapidstick™ 8-145 Epoxy Putty
Rapidstick™ 8-145 Epoxy Putty
Rapidstick™ 8-145 Epoxy Putty is an impact resistant kneadable putty with high bond strength. It consists of two parts in a 1:1 mix ratio and can be easily applied by hand or trowel. Part A (Resin – outer part) and Part B (Hardener – inner part) are separated by a thin film of plastic, and once removed and thoroughly kneaded to combine, the putty sets into an extremely tough, permanent substance, equal to the hardness of metal, in just 15 minutes at room temperature.
8-145 is used as a moldable space-filler for any shaped space, wet or dry, and can be used as a sealant, gap filler, adhesive, putty, or cement. It can be easily applied by hand or trowel, and bonds to a wide range surfaces, with excellent adhesion to most substrates.
Upon cure, Epoxy Putty can be sanded, drilled, tapped, machined, filed, and painted. It is ideal for the permanent repair of cracks, holes, dents, and leaks, plus the reshaping of damaged surfaces (chipped railings, dented skirting boards, etc.) and the long-term mounting of signs to walls.
(0 reviews)