Ready to use water based general purpose surface filler for use in wet areas
Sika® Filler-107 is a water based, ready to use general purpose surface and joint filler intended for use in wet areas
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Sika® Filler-107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers in wet environments such as kitchens and bathrooms.
Sika® Filler-107 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)
Multi-purpose adhesive sealant with a wide adhesion range
Sikaflex®-221 is a multi-purpose 1-component polyurethane adhesive / sealant that bonds well to a wide variety of substrates like metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is suitable for making permanent elastic seals.
Bonds well to a wide variety of substrates
Resistant to ageing
Can be sanded and painted
Bonds well to a wide variety of substrates
Resistant to ageing
Can be sanded and painted
Passes EN45545-2 R1/R7 HL3
Non-corrosive
Low odour
NSF-approved for incidental food contact
Potable water approved (meets AS4020 requirements)
Usage
Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals . Suitable substrate materials are metals, metal primers and paint coatings (2-component systems), ceramic materials and plastics. It is ideally used for internal sealing and simple bonding applications. Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-221 on materials prone to stress cracking. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Multifunctional adhesive sealant for marine applications
Sikaflex®-291 is a non-sag, 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture.
Sikaflex®-291 meets the requirements set out by the International Maritime Organisation (IMO).
Bonds well to a wide variety of substrates
Good ageing and weathering resistance
Elastic
Bonds well to a wide variety of substrates
Good ageing and weathering resistance
Elastic
Low odour
Non-corrosive
Can be over painted
Can be sanded
Usage
Sikaflex®-291 is a multipurpose product for use in marine constructions. It is suitable for making elastic, vibration-resistant joint seals, and can also be used for a variety of interior sealing applications. Sikaflex®-291 bonds well to the materials commonly used in marine construction like wood, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics (GRP, etc.). Sikaflex®-291 must not be used to seal plastics that are prone to stress cracking (e.g. Plexiglas, Polycarbonate, etc.). Once cured, Sikaflex®-291 can easily be sanded as required. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Sika Boom® G is a one-component, fast curing, gun applied polyurethane foam with a very high expansion rate.
One-Component
Easy application with application gun
High expansion rate
Sika Boom® G is designed for fixing, insulating and filling connection joints around window and door frames, air-conditioning vents and roller blind housings.
Sika Boom® G allows insulation against noise, cold and draughts after a single application.