Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size |
SIKA Abelflex Rod filler
Closed Cell Backer Rod (Abelrod)
An exceptionally strong and lightweight closed cell, polyethylene foam rod expansion joint and space filler.
- Closed Cell.
- Assists with joint design by providing a bond breaker and helping to determine the depth of the joint.
- Excellent recovery properties enable Abelflex Rod filler to withstand many years of compression and expansion, ensuring a tight seal from dirt and water entry.
- Ideal as a vertical and horizontal joint filler in concrete, masonry substrates between precast concrete panels, interior walls, sealing skylights, shop fronts and curtain wall construction.
- Can also be used in areas such as swimming pools, in draft proofing, dust sealing, sealing electrical control boxes, truck and trailer construction and as piping around chairs.
Advantages
- Closed Cell.
- Assists with joint design by providing a bond breaker and helping to determine the depth of the joint.
- Excellent recovery properties enable Abelflex Rod filler to withstand many years of compression and expansion, ensuring a tight seal from dirt and water entry.
- Highly resistant to weathering and most common chemicals.
- Meets the requirements of Australian Standard AS2170, “Plastic Materials for Food Contact Use”.
- Ideal filler prior to application of most sealants.
Related products
-
CleanersCRC Mass Air Flow Sensor Cleaner 300g
Most fuel injected vehicles are fitted with a mass air flow (MAF) sensor to measure air velocity which the computer uses to determine the proper air/fuel mixture. However, the MAF sensor gets dirty with debris, oil, grease and air filter fibres, causing inaccurate measurements of air flow which results in a ‘rich’ running engine, loss of power and excess emissions. CRC MAF Sensor Cleaner will safely clean and protect your mass air flow sensor, improving air/fuel ratio and increasing kilometres per litre. The use of aggressive products like brake and carburettor cleaners on MAF sensors can cause serious damage to sensitive parts.
Recommended as a safe and effective way to clean delicate MAF sensors in modern vehicles
Cleans & protects MAF Sensors – will not damage MAF sensors or housing (unlike other chemicals). Plastic safe & residue free – evaporates in seconds. Improves air/fuel ratio. Increases km/litre – improves fuel economy. Increases/restores horsepower
(0 reviews) -
CRCCRC Leak Detector 510G
CRC Leak Detector is formulated for the quick detection of gas and air leaks. The water based formula contains no oils, silicones or harmful solvents. CRC Leak Detector quickly and reliably locates gas leaks and pressure losses in pipes and pressurised systems by forming highly visible bubbles when applied over any leak.
Recommended for use on refrigeration units, air conditioners, exhausts, pipes, welding seams and compressors, can be used for almost all types of gasses (compressed air, refrigerants, natural gas, propane, butane, acetylene, oxygen, LPG, nitrogen and carbon dioxide)
Finds leaks fast, highlights all leaks, even under low pressure. Non-flammable. Water based formula with no oils, silicones or harmful solvents.
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Primer-3 N
Sika® Primer-3 N is a one component, transparent primer for porous surfaces and metalSika® Primer-3 N is a solvent-based, 1-component primer.
- Easy to apply
- Water repellent
- Short flash-off time
Sika® Primer-3 N is designed for Sikaflex®, SikaHyflex®, SikaBond® and Sikasil® products used on porous substrates (e.g. concrete) and metals.Advantages
- Easy to apply
- Water repellent
- Short flash-off time
(0 reviews) -
Chemicals, Lubricants & AdhesivesSIKA Sika® Filler-101
Ready to use water based fine surface and joint fillerSika® Filler-101 is a water based, ready to use joint filling and wide spreading of internal surfaces
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Sika® Filler-101 is suitable for indoor filling work on plaster boards, fabrics, old wallpapers, etc.
- Sika® Filler-101 has a very smooth finish
- Sika® Filler-101 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)
Advantages
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Quick drying
(0 reviews)