ALEMLUBE Oil Level Sight Gauge With Banjo Coupling 1/4″ Bsp 80mm
- Oil level sight gauge with banjo coupling made from brass & glass
- 90° positioning 80mm height 1/4″ BSP thread
- Maximum working pressure 90°c
- Machined to permit generous oil passage
- Glass is held between oil sealing washers by locking nut
- Complete range of oil line flow sight gauges, 90° gauges & vertical gauges available
Related products
-
Oil Nipples, Oilers, Systems & EquipmentPULSARLUBE Ol Series Sight Gravity Drip Feed Oiler 500cc
- Pulsarlube OL series single point oil lubricator 500cc capacity
- Single point sight lubricator with touch button control
- 500cc capacity
- Sight gravity feed oilers are widely used as reservoirs for small gravity fed continuous or brush lubrication systems
- Complete range of brass + plastic, brass + glass, solenoid & single point sight gravity drip feed oilers available
- Full range of lubricating brushes to suit drip feed oilers available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMLUBE Sight Gravity Solenoid Operated Drip Feed Oiler 3000ml
- Alemlube sight gravity brass solenoied operated drip feed oiler glass reservoir 3000ml capacity
- Made from brass, glass bottle, nitrile seals with nickel finish
- Solenoid valve operated with 1/4″ BSP fitting with 3000ml capacity
- Sight gravity feed oilers are widely used as reservoirs for small gravity fed continuous or brush lubrication systems
- Complete range of brass + plastic, brass + glass, solenoid & single point sight gravity drip feed oilers available
- Full range of lubricating brushes to suit drip feed oilers available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMITE Relief Fitting 1/8″ Bsp 45 – 80 Psi
- Alemite Relief Fittings are used on gearbox housings & bearings (kingpins, universal joints, etc.) where excessive lubrication pressure is unsuitable
- Flush type fitting with 1/8″ BSP thread type
- Relief pressure minimum 45 PSI, maximum 80 PSI
- Pressure based on using Air/Grease/Oil air at 1.2 Ft3/Hr
- Exceeds 72-hour salt spray test
- Trivalent zinc plating
- RoHS compliant
- Fittings open at predetermined pressure
- May be used with grease or oil
- Complete range of oil relief fittings & oil air vents available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMLUBE Brass Sight Gravity Drip Feed Oiler 1/4″ Od
- Alemlube brass sight gravity drip feed oiler
- Provides accurate control of flow rate from bulk reservoir to the bearing
- Sight window for visual flow indication
- 1/4″ OD with 1/8″ BSP fitting connection
- Sight gravity feed oilers are widely used as reservoirs for small gravity fed continuous or brush lubrication systems
- Complete range of brass + plastic, brass + glass, solenoid & single point sight gravity drip feed oilers available
- Full range of lubricating brushes to suit drip feed oilers available
(0 reviews)