ALEMITE Relief Fitting 1/8″ Bsp 0.25-1 Psi

Alemite Relief Fittings are used on gearbox housings & bearings (kingpins, universal joints, etc.) where excessive lubrication pressure is unsuitable
Flush type fitting with 1/8″ BSP thread type
Relief pressure minimum 0.25 PSI, maximum 1 PSI
Pressure based on using Air/Grease/Oil air at 1.2 Ft3/Hr
Exceeds 72-hour salt spray test
Trivalent zinc plating
RoHS compliant
Fittings open at predetermined pressure
May be used with grease or oil
Complete range of oil relief fittings & oil air vents available