ALEMLUBE Giant Threaded Oil Nipple 3/8″ Npt-Bsp
- Alemlube giant threaded 3/8″ NPT/BSP oil nipple
- Flush type
- Complete range of flush type threaded, drive fit & giant threaded oil nipples available
- Complete range of oil relief fittings & oil air vents available
Related products
-
Oil Nipples, Oilers, Systems & EquipmentALEMITE Relief Fitting 1/8″ Bsp 45 – 80 Psi
- Alemite Relief Fittings are used on gearbox housings & bearings (kingpins, universal joints, etc.) where excessive lubrication pressure is unsuitable
- Flush type fitting with 1/8″ BSP thread type
- Relief pressure minimum 45 PSI, maximum 80 PSI
- Pressure based on using Air/Grease/Oil air at 1.2 Ft3/Hr
- Exceeds 72-hour salt spray test
- Trivalent zinc plating
- RoHS compliant
- Fittings open at predetermined pressure
- May be used with grease or oil
- Complete range of oil relief fittings & oil air vents available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMITE Relief Fitting 1/8″ Npt 0.25-1 Psi
- Alemite Relief Fittings are used on gearbox housings & bearings (kingpins, universal joints, etc.) where excessive lubrication pressure is unsuitable
- Flush type fitting with 1/8″ BSP thread type
- Relief pressure minimum 0.25 PSI, maximum 1 PSI
- Pressure based on using Air/Grease/Oil air at 1.2 Ft3/Hr
- Exceeds 72-hour salt spray test
- Trivalent zinc plating
- RoHS compliant
- Fittings open at predetermined pressure
- May be used with grease or oil
- Complete range of oil relief fittings & oil air vents available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMLUBE Standard Threaded Oil Nipple 1/4″ Npt
- Alemlube standard threaded oil nipple 1/4″ NPT
- Flush type
- Complete range of flush type threaded, drive fit & giant threaded oil nipples available
- Complete range of oil relief fittings & oil air vents available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMLUBE Oil Level Sight Gauge With Locking Nut 1/4″ Bsp 100mm
- Oil level sight gauge with locking nut made from brass & glass
- 90° positioning 100mm height 1/4″ BSP thread
- Maximum working pressure 90°c
- Machined to permit generous oil passage
- Glass is held between oil sealing washers by locking nut
- Complete range of oil line flow sight gauges, 90° gauges & vertical gauges available
(0 reviews)