ALEMLUBE Standard Threaded Oil Nipple 1/4″ Npt
- Alemlube standard threaded oil nipple 1/4″ NPT
- Flush type
- Complete range of flush type threaded, drive fit & giant threaded oil nipples available
- Complete range of oil relief fittings & oil air vents available
Related products
-
Oil Nipples, Oilers, Systems & EquipmentALEMLUBE Brass Sight Gravity Drip Feed Oiler 1/4″ Od
- Alemlube brass sight gravity drip feed oiler
- Provides accurate control of flow rate from bulk reservoir to the bearing
- Sight window for visual flow indication
- 1/4″ OD with 1/8″ BSP fitting connection
- Sight gravity feed oilers are widely used as reservoirs for small gravity fed continuous or brush lubrication systems
- Complete range of brass + plastic, brass + glass, solenoid & single point sight gravity drip feed oilers available
- Full range of lubricating brushes to suit drip feed oilers available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMITE Relief Fitting 1/8″ Npt 0.25-1 Psi
- Alemite Relief Fittings are used on gearbox housings & bearings (kingpins, universal joints, etc.) where excessive lubrication pressure is unsuitable
- Flush type fitting with 1/8″ BSP thread type
- Relief pressure minimum 0.25 PSI, maximum 1 PSI
- Pressure based on using Air/Grease/Oil air at 1.2 Ft3/Hr
- Exceeds 72-hour salt spray test
- Trivalent zinc plating
- RoHS compliant
- Fittings open at predetermined pressure
- May be used with grease or oil
- Complete range of oil relief fittings & oil air vents available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMLUBE Sight Gravity Brass Drip Feed Oiler Plastic Reservoir 150ml
- Alemlube sight gravity brass drip feed oiler plastic reservoir 150ml capacity
- Made from brass, plexiglass & nitrile seals
- 3/8″ BSP fitting with 150ml capacity
- Sight gravity feed oilers are widely used as reservoirs for small gravity fed continuous or brush lubrication systems
- Complete range of brass + plastic, brass + glass, solenoid & single point sight gravity drip feed oilers available
- Full range of lubricating brushes to suit drip feed oilers available
(0 reviews) -
Oil Nipples, Oilers, Systems & EquipmentALEMLUBE Sight Gravity Steel Drip Feed Oiler Plastic Reservoir 21ml
- Alemlube sight gravity steel drip feed oiler plastic reservoir 21ml capacity
- Made from steel, plastic bottle, stencorra seals with nickel finish
- 1/8″ BSP fitting with 21ml capacity
- Sight gravity feed oilers are widely used as reservoirs for small gravity fed continuous or brush lubrication systems
- Complete range of brass + plastic, brass + glass, solenoid & single point sight gravity drip feed oilers available
- Full range of lubricating brushes to suit drip feed oilers available
(0 reviews)