TQB BRANDS Workshop Heater 30kW
This TradeQuip “Made for the Trade” Direct-Fired Forced Air Workshop Heater is ideal for workshops, garages and warehouses, reducing concrete freeze and emergency heating. The 38 Litre fuel tank can run for 9 hours on a single fill. It has on-board diagnostics and additional safety features. Ideal for quickly and efficiently heating cold condition workshops, this forced air heater can be used in a variety of commercial and industrial settings and is fuelled by kerosene or diesel. It is a reliable heating solution for an area of approx. 300 square metres and is easy to move and position as required thanks to the ergonomically designed inbuilt handle.
Features
- Burns diesel or kerosene
- Electronic flame control system
- Safety overheat thermostat and pressure switch
- Stainless steel heat exchanger
- Double skinned combustion chamber for thermo-acoustic insulation and safe low surface temperature
- Pre-purge and post-ventilation cycles
- Twist lock fuel cap with cable
Specifications
- Power Output: 30kW – 102,360 Btu/h
- Air Output: 750m3/h
- Motor: 240V/50Hz 230W
- Noise Level: 76dB(A)
- Air Delivery: 720cubic metres per hour
-
Fuel Consumption: 2.4kg/hr
-
Tank Capacity: 38Litres
- Dimensions: 880 x 456 x 590mm
- Nett Weight: 21kg
- Carton: 905 x 420 x 490mm
- Gross Weight: 23kg
Intended Use:
Ideal for space heating, frost protection and condensation control in commercial and industrial workshops, factories, and warehouses.
Related products
-
Fans, Coolers, Heaters & Air ConTQB BRANDS Workshop Fan Pedestal 750mm
This TradeQuip “Made for the Trade” Oscillating Pedestal Fan is powered by a vented, steel-cased 3-speed 240V 280W motor that delivers 300m³ per min . High-temperature resettable thermal auto reset and durable bearings allow operation in high temperatures. Non corroding aerodynamically balanced cast aluminium blades allow quiet operation. Has 15° fan head tilt and double-locking guard so fan can be aimed wherever necessary. Exceeds Aust Standards requirements.
The “TradeQuip Made for the Trade” range of workshop fans are heavily constructed industrial duty quality fans ideal for cooling large open workshop areas in the hottest Australian climates. These are more powerful and reliable than most other fans in this price bracket!
Rugged Construction and Materials
- Built with a strong all-metal structure and chromium steel grill for long lasting reliability
- The fully enclosed motor provides years of reliable service by preventing the build-up of dust and debris in vital areas
- The 280W thermally protected direct drive motor runs on less power and requires less maintenance compared to other motors
Expected Performance, Day In and Day Out
- This TradeQuip Workshop Fan delivers 300m³ per min of airflow, cooling, drying, or ventilating large areas fast
- Fully adjustable tilting fan head and pedestal up to 1760mm. so you can raise fan head or lower where you need it
- TradeQuip fans are designed for more regular use and applications to meet the needs of professionals and industrial users alike
- Built with safety in mind this TradeQuip fan meets Australian and New Zealand standards requirements
Features
- Thermally protected enclosed direct drive motor is protected from dust and debris to provide years of reliable service
- Direct drive motor is rugged and dependable, requiring less power and less maintenance compared to other motors
- Durable all-metal construction with black finish, chromium (finger safe) steel grille
- Aerodynamically balanced 3 spoke aluminium blades for maximum airflow and motor efficiency
- Adjustable tilt to direct air where you need it
- Cast Iron heavy duty base for stability
- 3 Speed Fan Control
- Oscillating or Fixed
- Metal Oscillating Gears
- Conforms to Australian and New Zealand Standards
Specifications
- Motor: 240V/50Hz/280W 3 Speed
- Fan Blade: Cast Alloy 750mm 3 Blades
- Noise Level: 86dB(A)
- Air Delivery: 300m³/min
- Oscillating Angle: 0º to 90º
- Adjustable Height: 1235 to 1760mm (Blade Centre)
- Nett Weight: 21kg
- Carton: 840 x 840 x 180mm
- Gross Weight: 23kg
Intended Use:
This equipment is intended to be used for cooling industrial or trade workshop/office environments by airflow circulation. Best used to cool when directed at a small area.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Ventilation Fan 450mm
WARNING: THIS UNIT IS NOT AN EXTRACTION FAN
This TradeQuip “Made for the Trade” Portable Ventilator Fan airs out rooms, circulates air or dries wet areas with a powerful air output of 162m³ per minute. Perfect for drywall, painting, auto body work, welding or any area that needs clean air fast. Features include an ergonomic handle for effortless transport and an aluminium blade and steel housing construction for long lasting performance. Complete with 5 metre flexible ducting.
Features- Aluminium blade and steel housing construction for long lasting performance
- Ergonomic handle for effortless carrying
- Four rubber feet for secure footing on any surface
- Fire resistant flexible exhaust ducting
- Great for dry wall, painting, resurfacing, tile repair, auto body work, welding
- Complete with 5 metre flexible ducting
Specifications
- Diameter: 450mm Alloy Multi Blade Fan
- Motor: 240v/50Hz
- Noise Level: 83dB(A)
- Start Power: 4.5kw – 21A
- Running Power: 1700w – 7A
- Speed: 2800rpm
- Air Delivery: 162m³/per minute
- Static Pressure: 972Pa
- Amperage: 10A
- Ingress Protection: IP42 Rated
- Dimensions: 475(H) x 585(W) x 545(L) mm
- Weight: 35kg
- Carton 1 of 2: 475 x 585 x 545mm (Weight: 31kg)
- Carton 2 of 2: 480 x 480 x 200mm (Weight: 6kg)
Replacement 5 metre Flexible Tube available: Product Code: 1141T-1
Intended Use:
Ventilation fans are designed to remove and dispense contaminated air from industrial workshop processes which generate heat, steam, or other noxious emissions. Can also be used to blow fresh air into a confined work space such as a tank or man hole.
This product is an Industrial Product and not suitable for household use.
Warning:
This product is NOT recommended for use with a Generator.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 200W
With its compact size, this eQuipt “Designed to Deliver” Portable Evaporative Cooling unit is perfectly suited to smaller work spaces, yet still delivers an impressive amount of air output. This easy-to-operate unit produces up to 6,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . Adjustable swing louvre feature that offers swinging airflow and allows you to adjust the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
Compared to other climate control systems available, evaporative air cooling provides the most energy efficient temperature relief for commercial or industrial environments of any scale.
Up to 80% more economical than conventional air conditioning systems, our evaporative cooling systems have delivered proved cost reductions and operational returns for many industrial and mechanical workshops.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Easy to remove cooling pads & filters for quick & easy maintenance
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Conveniently located drain valve at bottom of tank for easy access
- Direct drive
- LCD 12 hour timer panel
- Nylon castors for easy portability
Specifications
- Power Unit: 220V 50Hz 200W 10amp plug
- Operating Current: 2.4A
- Power Cord Length: 2300mm
- Max. Air Flow: 9,000 m3 per hour
- Noise Level: 70dB(A)
- Speed Control: 3-speed
- Fan Diameter: 520mm 4-blade propeller
- Effective Cooling Area: 50-60m2
- Water Consumption; 5-6 Litres per hour
- Water Tank Capacity: 70 Litres
- Dimension: 1360(H) x 820(W) x 545(D)
- Nett Weight: 33kg
- Gross Weight 36kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler Cover
This TradeQuip Protective Cover keeps TradeQuip Portable Evaporative Coolers clean, protected and dust-free when not in use. This economical and effective cover is made from durable black fabric. The low-profile design is compatible with TradeQuip 1027T, 1028T and 1035T models.
- Water-resistant fabric
- Lightweight and breathable
- UV treated
- Easy to use
Intended Use:
To protect 1027T and 1035T TradeQuip Portable Evaporative Coolers when not in use.
About the TradeQuip brand
The ‘TradeQuip’ brand of workshop equipment, is designed for use in a demanding workshop environment by professional users. With proven and trusted “Made for the Trade” reliability, ‘TradeQuip’ branded products offer the very best in performance for an affordable price. All backed by a 1year trade guarantee across 1,000+ distributors Australia wide.
(0 reviews)