TQB BRANDS Adaptor Kit For Hydraulic Press
The Borum Hydraulic Press Adaptor Kit includes 8 different sized pins (mandrels) ranging from 2,000kg to 20,000kg capacity, a pin holder, a storage shelf along with a mounting kit, and a pin plate with the weight capacity shown for each pin. This very handy set of eight steel mandrels, adaptor and press plate expands the uses of your workshop press for a wider range of applications involving different sized work pieces.
Kit contains; (Mandrel Length x Diameter)
- 50mm x 10mm
- 60mm x 12mm
- 60mm x 16mm
- 85mm x 18mm
- 85mm x 20mm
- 85mm x 22mm
- 110mm x 25mm
- 110mm x 30mm
- Mountable storage rack
- Adaptor Spigot Diameter: 25mm
- Weight: 7.5kg
- Carton: 310 x 205 x 115mm
BPAK compatible with the following presses: BHSP20T, BHSP30T, 2048T, 2038T, 2036T, BSP100TA & BSP75TA.
Intended Use
Designed to use in conjunction with a hydraulic workshop press when straightening, bending and pressing any component that is difficult to handle.
Related products
-
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Press 45,000kg
This “TradeQuip “Made for the Trade” 45,000kg Hydraulic Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 826mm bed width and 195mm inside bed gap this press becomes one of the most diverse Workshop Press in the TradeQuip range. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed.
“TradeQuip “Made for the Trade” Hydraulic Workshop Presses are available in a variety of capacities and sizes. The all-welded steel press frames are designed for maximum strength, reliability and durability, provide optimum rigidity to prevent flexing under maximum load. These strong frames and powerful high-pressure hydraulics will provide years of dependable service in most industrial applications. When components need to be removed or assembled, “TradeQuip “Made for the Trade” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!
Features:
- Heavy-duty high-grade steel frame
- 100mm pressure gauge
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish to help prevent rust
- Paint is oil, grease and dirt-resistant
- Hand winch for fast height adjustment
Specifications:
- Safe Working Capacity: 45,000kg
- Working Range: 159-859mm
- Overall Height: 1707mm
- Overall Width: 1420mm
- Overall Depth: 826mm
- Width Between Side Posts: 186mm
- Bed Surface Depth: 359mm
- Bed Inside: 195mm
- Bed Width: 826mm
- Piston Ram Stroke: 190mm
- Ram Diameter: 90mm
- Bed Height Settings: 6
- Nett Weight: 296kg
- Carton: 1040 x 390 x 1900mm
- Gross Weight: 335kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 50,000kg
This “TradeQuip “Made for the Trade” 50,000kg Air/Manual Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 713mm bed width and 210mm inside bed gap this press becomes one of the most diverse Workshop Presses in the TradeQuip range. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed.
Features:
- Heavy-duty frame constructed of high-grade steel and built to exacting standards for quality and durability
- Hand operated air trigger ram travel control
- 100mm pressure gauge
- Polished pneumatic aluminium air motor
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
- Integrated overload protection valve keeps from overloading the system
- Double spring ram return for fast ram retraction
Specifications:
- Safe Working Capacity: 50,000kg
- Working Range: 137-837mm
- Overall Height: 1700mm
- Overall Width: 1290mm
- Overall Depth: 745mm
- Bed Outside: 356mm
- Bed Inside: 210mm
- Bed Width: 713mm
- Piston Ram Stroke: 190mm
- Ram Diameter: 95mm
- Bed Height Settings: 6
- Operating Air Pressure: 110-125 psi
- Nett Weight: 271kg
- Carton: 1900 x 945 x 490mm
- Gross Weight: 305kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS FWD Wheel Bearing Kit
This versatile TradeQuip Universal FWD Wheel Bearing Kit includes everything you need to remove and install bushes, bearings and seals. Constructed from heat-treated forged high carbon steel, this durable set is perfect for the removal and installation for Bearing bushes ,Silent bearing, Hydraulic bearing and Rubber bearing. This units comes in an individually organised carrying case, making it perfect for both the automotive professional or serious DIY enthusiast. The professional “Made for the Trade” 23pce FWD Wheel Bearing Kit has applications across several industries.
Features- 23 Piece Set Constructed from heat-treated forged carbon steel
- Sturdy Blow Mould Case
Specifications
- Hub Screw Length: 207mm
- Hub Screw Drive: 32; 38mm
- Sleeve External: 76.5 x 65; 86 x 77; 91 x 81.5; 102 x 92mm
- Drift Sizes: 50; 55; 59; 63; 66.5; 70; 71.5; 73; 73.5; 75, 77.5; 81.4; 83.3; 86; 88.4; 102mm
Intended Use
This FWD WHEEL BEARING KIT’s intended use is for the removal and installation of bushes, bearings and seals, races, bearings, sprockets and pulleys on cars, trucks, off-road construction equipment and machinery
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Master Press & Pull Set
This versatile TradeQuip Universal Press and Pull Sleeve Kit includes everything you need to remove and install bushes, bearings and seals. Constructed from heat-treated forged high carbon steel, this durable set is perfect for the removal and installation for Bearing bushes ,Silent bearing, Hydraulic bearing and Rubber bearing. This units comes in an individually organised carrying case, making it perfect for both the automotive professional or serious DIY enthusiast. The professional “Made for the Trade” 28pce Press and Pull Sleeve Kit has applications across several industries.
Features- 20 Sleeves Constructed from heat-treated forged carbon steel
- Sturdy Blow Mould Case
Specifications
- 4 x Step Plates: 74, 76, 78, 80mm
- 4 x Pulling Spindles With Thrust Bearings (10mm, 12mm, 14mm & 16mm)
- 20 x Press Sleeves: 44 x 43; 46 x 36; 48 x 38; 50 x 40; 52 x 42; 54 x 44; 56 x 46; 58 x 48; 60 x 50; 62 x 52; 64 x 54; 66 x 56; 68 x 58; 70 x 60; 72 x 62; 74 x 64; 76 x 66; 78 x 68; 80 x 70; 82 x 72mm
Intended Use
This Master PRESS & PULL KIT’s intended use is for the removal and installation of bushes, bearings and seals, races, bearings, sprockets and pulleys on cars, trucks, off-road construction equipment and machinery
(0 reviews)