TQB BRANDS Workshop Press 20,000kg
Elevate your workshop’s productivity with this heavy-duty eQuipt “Designed to Deliver” manual press, engineered to deliver uncompromising power and precision for all your pressing, bending, and straightening needs. The dependable double-spring return system ensures rapid ram retraction, allowing you to move through high-pressure jobs with speed and total control. Designed for the professional environment, its rugged, dirt-resistant finish and included bed plates make it a versatile, long-lasting staple for any serious automotive or industrial bay.
Features:
- Paint finish is oil, grease and dirt resistant for easy cleanup
- Dependable double spring return for fast ram retraction
- Pair of bed plates included
Specifications:
- Safe working capacity: 20,000kg
- Working range: 45-721mm
- Piston ram stroke: 161mm
- Bed Width: 662mm
- Overall Dimensions: 700(L) x 660(D) x 1507(H) mm
- Bed Dimensions: 514(L) x 211(D) mm
- Working Bed Gap: 365mm x 105mm
- Press Spigot Diameter: 30mm
- Weight: 81kg
Intended Use
For specialist professional straightening, bending & pressing. Removing and installing gears, bearings and bushings.
Related products
-
Workshop Presses & AccessoriesTQB BRANDS Workshop Press 30,000kg
Elevate your workshop’s productivity with this heavy-duty eQuipt “Designed to Deliver” manual press, engineered to deliver uncompromising power and precision for all your pressing, bending, and straightening needs. The dependable double-spring return system ensures rapid ram retraction, allowing you to move through high-pressure jobs with speed and total control. Designed for the professional environment, its rugged, dirt-resistant finish and included bed plates make it a versatile, long-lasting staple for any serious automotive or industrial bay.
Features:
- Paint finish is oil, grease and dirt resistant for easy cleanup
- Dependable double spring return for fast ram retraction
- Pair of bed plates included
Specifications:
- Safe working capacity: 30,000kg
- Working range: 45-713mm
- Piston ram stroke: 166mm
- Bed Width: 661mm
- Overall Dimensions: 700(L) x 660(D) x 1605(H) mm
- Bed Dimensions: 480(L) x 260(D) mm
- Working Bed Gap: 395mm x 134mm
- Press Spigot Diameter: 35mm
- Weight: 113kg
Intended Use
For specialist professional straightening, bending & pressing. Removing and installing gears, bearings and bushings.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Press 45,000kg
This “TradeQuip “Made for the Trade” 45,000kg Hydraulic Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 826mm bed width and 195mm inside bed gap this press becomes one of the most diverse Workshop Press in the TradeQuip range. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed.
“TradeQuip “Made for the Trade” Hydraulic Workshop Presses are available in a variety of capacities and sizes. The all-welded steel press frames are designed for maximum strength, reliability and durability, provide optimum rigidity to prevent flexing under maximum load. These strong frames and powerful high-pressure hydraulics will provide years of dependable service in most industrial applications. When components need to be removed or assembled, “TradeQuip “Made for the Trade” hydraulic presses deliver the controlled power to safely remove and install bearings, gears, U-joints, bushings, ball joints and pulleys with precision and versatility!
Features:
- Heavy-duty high-grade steel frame
- 100mm pressure gauge
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish to help prevent rust
- Paint is oil, grease and dirt-resistant
- Hand winch for fast height adjustment
Specifications:
- Safe Working Capacity: 45,000kg
- Working Range: 159-859mm
- Overall Height: 1707mm
- Overall Width: 1420mm
- Overall Depth: 826mm
- Width Between Side Posts: 186mm
- Bed Surface Depth: 359mm
- Bed Inside: 195mm
- Bed Width: 826mm
- Piston Ram Stroke: 190mm
- Ram Diameter: 90mm
- Bed Height Settings: 6
- Nett Weight: 296kg
- Carton: 1040 x 390 x 1900mm
- Gross Weight: 335kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Air/Hydraulic Press 50,000kg
This “TradeQuip “Made for the Trade” 50,000kg Air/Manual Workshop Press is perfect for straightening, stamping, bending and pressing any component that is hard to handle. With it’s very wide 713mm bed width and 210mm inside bed gap this press becomes one of the most diverse Workshop Presses in the TradeQuip range. The ram is powered by a manual two-speed pump, and the non-slip bed winch features a steel cable roller for easy raising and lowering of the press bed.
Features:
- Heavy-duty frame constructed of high-grade steel and built to exacting standards for quality and durability
- Hand operated air trigger ram travel control
- 100mm pressure gauge
- Polished pneumatic aluminium air motor
- Bed winch for easy raise and lower adjustment
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished and fitted with backup ring, preventing load from falling slowly or bypassing oil drift
- Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures
- Integrated overload protection valve keeps from overloading the system
- Double spring ram return for fast ram retraction
Specifications:
- Safe Working Capacity: 50,000kg
- Working Range: 137-837mm
- Overall Height: 1700mm
- Overall Width: 1290mm
- Overall Depth: 745mm
- Bed Outside: 356mm
- Bed Inside: 210mm
- Bed Width: 713mm
- Piston Ram Stroke: 190mm
- Ram Diameter: 95mm
- Bed Height Settings: 6
- Operating Air Pressure: 110-125 psi
- Nett Weight: 271kg
- Carton: 1900 x 945 x 490mm
- Gross Weight: 305kg
Intended Use
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews) -
Workshop Presses & AccessoriesTQB BRANDS Hydraulic Workshop Press 20,000kg
The TradeQuip “Made for the Trade” Hydraulic Workshop Press is great for straightening, stamping, bending and pressing any component that is hard to handle. The polished inner cylinder walls extend the life of the hydraulic seals to minimise abrasion and wear, while the cylinder ram and pistons are also polished and chromed, guided by high performance seals, wear rings and dust seals. It is ideal for a variety of workshop applications and in particular suited to agricultural or industrial use. Jobs such as straightening, ending, folding, punching, removing bolts and bearings etc, are some of the tasks that can be easily accomplished.
(Previous models include product code/s; 1069T)
Features:
- Heavy-duty H-frame constructed of high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint finish is oil, grease and dirt-resistant for easy cleanup
- High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life
- Piston-ram is treated and polished for extended life
- Reinforced head bolster for added strength
- Pair of bed plates included
Specifications:
- Safe Working Capacity: 20,000kg
- Working Range: 43 – 882mm
- Overall Height: 1795mm
- Overall Width: 780mm
- Overall Depth: 690mm
- Bed Width: 505mm
- Bed Gap: 105mm
- Bed Inside Working Area: 358 x 105mm
- Press Head Cap Diameter: 45mm
- Press Head Cap Length: 17mm
- Piston Ram Stroke: 185mm
- Ram Lateral Adjustment: 180mm
- Nett Weight: 90kg
- Crate: 1550 x 280 x 240mm
- Gross Weight: 110kg
Intended Use:
Ideal for straightening, stamping, bending and pressing any component that is difficult to handle.
(0 reviews)