TQB BRANDS Hydraulic Garage Jack 3,000kg
This TradeQuip “Made for the Trade” Professional Quality low profile 2906T Garage Jack with twin piston ‘quick lift’ technology provides extra lift per pump of the handle. Fast lowering two-piece twist handle is fitted with a foam bumper preventing possible panel damage when being pumped. With a knurled steel handle for a steady grip and a solid, rolled edge welded steel construction, this heavy duty quick lift dual pump garage jack is built to last.
Features:
- Tested in Australia ensuring full compliance with Mandatory Australian Standard AS2615:2016
- Professional quality rugged steel construction
- Low profile and deep reach
- 1400mm long handle for deeper reach
- Dual pump lift technology for a quicker lift
- Internal bypass valve overload protection
- Lead-free paint finish to ensure a long lasting finish and prevent rust
- Paint is oil, grease and dirt-resistant
- Protective foam handle cover prevents vehicle damage
Specifications:
- Safe Working Capacity: 3,000kg
- Minimum Height: 118mm
- Maximum Height: 488mm
- Handle Length: 1400mm
- Front Castors: 90mm diameter – 40mm width
- Rear Castors: 60mm diameter – 25mm width
- Saddle Diameter: 115mm
- Dimensions: 670mm(L) x 380mm(W) x 170mm(H)
- Weight: 43kg
NOTE: This Garage Jack must only be used on hard level surfaces and be free to roll during lifting and lowering. DO NOT get under a vehicle that is only supported by this Garage Jack. ALWAYS USE JACK STANDS!
WARNING: Always ensure the vehicle wheels are chocked before lifting.This Garage Jack is a lifting and lowering device only and is designed for lifting part of the total vehicle. Do not move or dolly the vehicle whilst the vehicle is on this Garage Jack.
Intended Use
A heavy-duty floor jack designed for lifting and lowering (NOT SUPPORTING) loads in an automotive workshop with added capacity and maximum lift height required to handle most UTES, SUV’s and light commercial vehicles.
Related products
-
Garage JacksTQB BRANDS Truck Jack Air Actuated 3-Stage 50,000kg
The BORUM “Industrial Quality” Commercial Jacks are made to TQB Brands specification using quality components that are built to exacting standards through CNC machining and Robotic Welding. The result is top industrial performance and reliability. BORUM “Industrial Quality” Commercial Jacks are the perfect choice for a wide variety of uses. These Commercial Jacks are carefully constructed from the highest grades of rugged steel. The super strong hydraulic pump utilises wear-resistant American Made XTP double sealing ring technology. Only the finest quality of Hydraulic Oil is used that has been tested from -25°C – 60°C.
Use these workhorses with a 145–175psi rated air pressure supply to lighten the load and provide the fast, strong lifting power you need. With several lifting options as well as included saddle adaptors…the wide range of BORUM Commercial Jacks will suit most desired applications from agriculture to mining, earth-moving to passenger transport as well as aviation and military.
The BTJ102550TA quickly and easily manages a hefty 50,000kg in the first stage lift position, 25,000kg at the higher 2nd stage extension and 10,000kg at its highest 3rd extension. This Air Actuated Commercial Jack is designed for heavy duty commercial use and features a long reach “T” handle and large rubber wheels for smooth manoeuvring around the workshop. As always with BORUM, safety is just as important as industrial standard quality, so all BORUM Truck Jacks have a built-in safety valve to prevent overloading and keep the operator safe. Additional safety feature includes a Self-Return lowering and lifting switch to ensure complete control during operation. With a low-profile minimum height of 160mm this jack is ideal for low ground-clearance vehicles and a high lift maximum of 472mm (includes additional lifting saddles), this BORUM Air Actuated Jack is a very versatile heavy-lifter suitable for most workshops.
Features
- Seals made in America
- Double Sealing Function using XTP Industry Sealing
- Telescopic air actuation lift (air-hydraulic pump)
- Long T-handle lets you easily position your jack under vehicle
- Self-Returning Lowering and Lifting Switch
- Internal and External Cylinders hard chromed
- High manoeuvrability & deep reach under vehicles
- 2 extension adaptors / saddle plates
- Large rubber wheels
- All adaptors can be properly stored for transport on each side of the jack
Specifications
- First Stage: 50,000kg Safe Working Capacity
- Second Stage: 25,000kg Safe Working Capacity
- Third Stage: 10,000kg Safe Working Capacity
- First Stage Hydraulic Lift: 61mm
- Second Stage Hydraulic Lift: 61mm
- Third Stage Hydraulic Lift: 69mm
- Minimum Height: 160mm
- Maximum Height: 471mm
- Adaptors: 45mm and 75mm
- Handle Length: 1370mm
- Operating Air Pressure: 145-175psi
- Chassis: 825x282x160mm
- Nett Weight: 61kg
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Garage JacksTQB BRANDS Truck Jack Air Actuated 2-Stage 30,000kg
The BORUM “Industrial Quality” Commercial Jacks are made to TQB Brands specification using quality components that are built to exacting standards through CNC machining and Robotic Welding. The result is top industrial performance and reliability. BORUM “Industrial Quality” Commercial Jacks are the perfect choice for a wide variety of uses. These Commercial Jacks are carefully constructed from the highest grades of rugged steel. The super strong hydraulic pump utilises wear-resistant American Made XTP double sealing ring technology. Only the finest quality of Hydraulic Oil is used that has been tested from -25°C – 60°C.
Use these workhorses with a 145–175psi rated air pressure supply to lighten the load and provide the fast, strong lifting power you need. With several lifting options as well as included saddle adaptors…the wide range of BORUM Commercial Jacks will suit most desired applications from agriculture to mining, earth-moving to passenger transport as well as aviation and military.
The BTJ1530TA quickly and easily manages a hefty 30,000kg in the first stage lift position and 15,000kg at the higher 2nd stage extension. This Air Actuated Commercial Jack is designed for heavy duty commercial use and features a long reach “T” handle and large rubber wheels for smooth manoeuvring around the workshop. As always with BORUM, safety is just as important as industrial standard quality, so all BORUM Truck Jacks have a built-in safety valve to prevent overloading and keep the operator safe. Additional safety feature includes a Self-Return lowering and lifting switch to ensure complete control during operation. With a low-profile minimum height of 150mm this jack is ideal for low ground-clearance vehicles and a high lift maximum of 409mm (includes additional lifting saddles), this BORUM Air Actuated Jack is a very versatile heavy-lifter suitable for most workshops. (Previous models include product code/s; 2076, BAJ2076)
Features
- Seals made in America
- Double Sealing Function using XTP Industry Sealing
- Telescopic air actuation lift (air-hydraulic pump)
- Long T-handle lets you easily position your jack under vehicle
- Self-Returning Lowering and Lifting Switch
- Internal and External Cylinders hard chromed
- High manoeuvrability & deep reach under vehicles
- 2 extension adaptors / saddle plates
- Large rubber wheels
- All adaptors can be properly stored for transport on each side of the jack
Specifications
- First Stage: 30,000kg Safe Working Capacity
- Second Stage: 15,000kg Safe Working Capacity
- First Stage Hydraulic Lift: 73mm
- Second Stage Hydraulic Lift: 66mm
- Minimum Height: 150mm
- Maximum Height: 409mm
- Adaptors: 45mm and 75mm
- Handle Length: 1300mm
- Operating Air Pressure: 145-175psi
- Chassis: 480x290x150mm
- Nett Weight: 38kg
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Garage JacksTQB BRANDS Truck Jack Air Actuated 2-Stage 80,000kg
The BORUM “Industrial Quality” Commercial Jacks are made to TQB Brands specification using quality components that are built to exacting standards through CNC machining and Robotic Welding. The result is top industrial performance and reliability. BORUM “Industrial Quality” Commercial Jacks are the perfect choice for a wide variety of uses. These Commercial Jacks are carefully constructed from the highest grades of rugged steel. The super strong hydraulic pump utilises wear-resistant American Made XTP double sealing ring technology. Only the finest quality of Hydraulic Oil is used that has been tested from -25°C – 60°C.
Use these workhorses with a 145–175psi rated air pressure supply to lighten the load and provide the fast, strong lifting power you need. With several lifting options as well as included saddle adaptors…the wide range of BORUM Commercial Jacks will suit most desired applications from agriculture to mining, earth-moving to passenger transport as well as aviation and military.
The BTJ5080TA quickly and easily manages a hefty 80,000kg in the first stage lift position and 50,000kg at the higher 2nd stage extension. This Air Actuated Commercial Jack is designed for heavy duty commercial use and features a long reach “T” handle and large rubber wheels for smooth manoeuvring around the workshop. As always with BORUM, safety is just as important as industrial standard quality, so all BORUM Truck Jacks have a built-in safety valve to prevent overloading and keep the operator safe. Additional safety feature includes a Self-Return lowering and lifting switch to ensure complete control during operation. With a minimum height of 230mm this jack is ideal for medium ground-clearance vehicles and a high lift maximum of 563mm (includes additional lifting saddles), this BORUM Air Actuated Jack is a very versatile heavy-lifter suitable for most workshops.
Features
- Seals made in America
- Double Sealing Function using XTP Industry Sealing
- Telescopic air actuation lift (air-hydraulic pump)
- Long T-handle lets you easily position your jack under vehicle
- Self-Returning Lowering and Lifting Switch
- Internal and External Cylinders hard chromed
- High manoeuvrability & deep reach under vehicles
- 2 extension adaptors / saddle plates
- Large rubber wheels
- All adaptors can be properly stored for transport on each side of the jack
Specifications
- First Stage: 80,000kg Safe Working Capacity
- Second Stage: 50,000kg Safe Working Capacity
- First Stage Hydraulic Lift: 111mm
- Second Stage Hydraulic Lift: 102mm
- Minimum Height: 230mm
- Maximum Height: 563mm
- Adaptors: 45, 75mm
- Handle Length: 1380mm
- Operating Air Pressure: 145-175psi
- Chassis: 930(L) x 230(H) x 340(W)mm
- Nett Weight: 106kg
- Carton: 940x360x260mm
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -
Garage JacksTQB BRANDS Truck Jack Air Actuated Commercial 22,000kg
This Borum “Industrial Quality” pneumatic heavy-duty 22,000kg Air Actuated Hydraulic Quick Lift Truck Jack has a powerful super duty air motor to easily and reliably lift heavy vehicle loads. This super-tough Truck Jack delivers enough air/hydraulic power to lift up to 22,000kg and is ideal for servicing trucks and farm equipment. Other features include 200mm diameter wheels for easy maneuverability, four saddle adaptors and a cast iron base with formed steel housing for added durability.
Built with the best components from the highest grades of rugged steel, to the wear-resistant advanced technology sealing rings and a heavy duty hydraulic pump that’s filled with industrial grade high/low temperature-resistant hydraulic oil.
The alloy hardened piston-ram is treated and polished to resist thinning over time and uses an advanced Y-type polyurethane sealing ring system that keeps the jack solidly raised in the desired position, preventing the load from falling slowly. Fitted with a safety overload valve for extra protection, the safety valve is installed between the pump and high-pressure check valve in the barrel/lift ram assembly. When attempting to raise a load greater than the jack’s capacity, the safety valve opens on each pump stroke and diverts any further oil back to the reservoir thus preventing the raising of the load.
This 22,000kg Truck Jack is designed for industrial strength durability. The rugged super-grade steel frame is teamed with an industrial quality lead-free paint finish that covers the entire surface to ensure long-lasting wear and help prevent rust. The paint is also oil, grease and dirt-resistant for easy cleanup. (Previous models include product code/s; BPROAJ22T, BTJ22TA)
Features:
-
Solid heavy duty construction for superior performance
- Industry benchmark for harsh workplace conditions
- Hardened alloy plated ram ensures heavy duty performance
- Advanced hydraulic seal technology
- Fast motion super duty air pump
- Industry benchmark for heavy duty workplace conditions
- Advanced technology sealing rings
- High-low temperature-resistant hydraulic oil
- Treated and polished piston and ram
- Built-in bypass hydraulic safety overload system
- Convenient & efficient height adaptors
- 3-position pumping handle
- High quality lead-free paint ensures long-lasting wear and prevents rust
- Oil, grease and dirt-resistant finish for easy cleanup
Specifications:
- Safe Working Capacity: 22,000kg
- Lift Range: 210-525mm
- Hydraulic Lift: 120mm
- Adjustable Height: 105mm
- Handle Length: 1075mm
- Air Supply: 100-120psi
- Wheel Diameter: 175mm
- Interchangeable Saddle Adaptors: 20 50 100mm
- Chassis: 570(L) x 215(H) x 310(W)mm
- Nett Weight: 48kg
- Carton: 660(L) x 360(W) x 280(H)mm
- Gross Weight: 50kg
Intended Use
For professional heavy duty use on truck, agriculture, construction, mining, automotive, and marine applications where lifting and lowering is required.
(0 reviews) -