VOLT SAFETY Non-contact Phase Rotation Tester
Volt’s Non-Contact Phase Rotation Tester is designed to identify phase sequence on three-phase systems and open phases.
Key Features:
- Measurement Range: 75VAC – 1000VAC
- Frequency Range: 45Hz – 65Hz
- Dimensions: 127mm x 72mm x 44mm
- Weight: 400g
- Cable Length: 800mm
- Clip Jaw Opening: 33mm diameter
- Operating Temperature: 0C – 40C
- Identifies phase sequence on three-phase systems and open phases
- Brightness button to help with visibility in bright areas
- Bright LED display lights to indicate results of test
- No metal contact points to provide greater safety
- Powered by one 9V battery
- Loud buzzer indicator
Standards:
- EN 61010-1 CAT III 1000V / CAT IV 600V
- EN 61326-1 EN 61557-1
- EN 61557-7
- IP40
Related products
-
Other Diagnostic ToolsVOLT SAFETY Aluminised Furnace Trousers – Elliotts
Elliotts Aluminised Furnace Trousers feature 50mm adjustable braces and side adjusters for a firmer fit. The T-Gard P190 Thermal Liner has been specifically designed for Furnace PPE. This design is a generous fit and provides the wearer with 360 degrees of protection.
Key Features:
- Sizes Available: S, M, L, XL, 2XL, 3XL, 4XL
- Material: Aluminised Carbon / Aramid + T-Gard P190 – 770 gsm
- Full-fitting trousers
- Designed to be worn over work trousers (secondary protective clothing)
- 50mm adjustable braces
- Side adjusters for a firmer fit
- Lined with T-Gard P190 Thermal Liner
- Sewn with heat-resistant aramid thread for extra durability
- Suitable for Foundry and Furnace work
Standards:
- ISO 11612
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY RD8200-TX10 Cable and Pipe Locator Kit – Radiodetection
The RD8200 is a professional-grade cable and pipe locator engineered for accuracy, reliability, and advanced diagnostics. Ideal for utility contractors, surveyors, and infrastructure teams, it delivers precise underground asset detection even in challenging environments. Combining the receiver with a powerful 10-Watt transmitter and clamp, crews can accurately identify target assets and reduce strike risk. Built for reliable, accountable damage prevention before excavation begins.
Easy to setup and use, along with a sun light readable display, a high performance audio system and vibration alerts ensure you’re always ready for challenging environments.
Cable Locator Key Features:
- Maximum Depth Readout: Up to 30m Cable/Pipe and 19.5m Sonde
- Depth Measurement Precision: ±3%
- Locate Accuracy: ±5% of depth
- Battery Life: Up to 13 hours
- Size: 64.8cm x 28.6cm x 12.5cm
- Weight: Approx. 2kg
- Simultaneous display of depth and current
- User configurable Compass, active modes and passive modes
- Peak, Null, Peak-Plus, Guidance Mode, Broad Peak
- All Sonde Frequencies (512Hz, 640Hz, 8kHz, 33kHz)
- 22 Locator Frequencies (From 512Hz to 200kHz)
- 14 Current Direction Frequencies 219.9Hz / 439.8Hz to 4096Hz / 8192Hz
- Fault Finding Modes 8kHz and 256Hz
- Dynamic Overload Protector
- Power (50/60 Hz selectable) broad band, selective harmonics
- Power, Power Filters, Radio, CPS (100/120Hz, no more CATV mode)
- Depth in Power Mode
- Sounds 3db higher than other locators, high Pitch option for noisy environments, speaker in back of unit
- 3.5mm headphone socket
- StrikeAlert Technology warns operators of buried cables via audible alerts and vibration
- Dynamic Overload Protection by filtering interference in electrically noisy environments
- Rugged, ergonomic design built for field durability and long work sessions
- High-visibility display with a screen readable even in direct sun light
- Audible and visual warning when user is swinging the locator excessively
Transmitter Key Features:
- Max Power Output: 10W
- Max Voltage Output: 90V
- Max Current Output: 0.5A
- Weight: Approx. 3kg
- 16 Active Frequencies, 8 Induction Frequencies
- 100mm Clamp
Standards:
- Cable Locator – IP65
- Transmitter – IP54
- EN 61010-1:2010
- EN 61326-1:2013
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Aluminised Furnace Hood – Elliotts
Elliotts Aluminised Furnace Hood is designed to protect the head and upper body in heavy-duty furnace environments where protection from high radiant heat, sparks and slag is required. This Aluminised Furnace Hood includes a T-Gard P190 Thermal Liner which has been specifically designed for Furnace PPE.
Key Features:
- Material: CA340 – Aluminised Carbon / Aramid – 340gm2
- Replaceable integrated high reflective visor 380mm wide x 195mm
- Full head, neck, shoulder and chest protection
- Integrated hard hat, aluminised frame with gold heat reflective visor
- Underarm straps to ensure hood stays in place when bending over
- High heat complaint hard hat as standard
Standards:
- ISO 11612
(0 reviews) -
Memory Power SupplySP TOOLS Memory Power Supply
FEATURES
- Retains setting of computers, radios, clocks, etc. when battery is disconnected
- Attaches to 9 volt battery
- Plugs into cigarette lighter socket
(0 reviews)