VOLT SAFETY High Current Micro Ohmmeter Ducter Tester DLRO200 – Megger
Megger High Current Micro Ohmmeter Ducter Tester DLRO200 measures resistance between 0.1 and 1 ohms, at high currents and also test currents from 10 amps up to 200 amps subject to the load resistance and supply voltage.
Key Features:
- Dimensions: 410mm x 250mm x 270mm
- Small and weighs less than 15kg
- Test currents from 10A to 200A DC
- 0.1 µΩ best resolution
- On board memory for up to 300 test results and notes
- RS232 port to download stored results or for real time output to a printer
- Supplied complete with 5m test leads and download software
Standards:
- IEC61010-1
Related products
-
Other Diagnostic ToolsVOLT SAFETY Heat Resistant Woven Aramid Gloves – Elliotts
Elliotts Heat Resistant Woven Aramid Gloves are made of heat-resistant para-aramid outer shell materials and meta-aramid thermal liners. These highly technical materials provide high levels of contact, convective, and radiant heat protection, as well as protection from small drops of molten metal.
Key Features:
- Length: 457mm
- Size: One Size Fits Most
- Materials:
- Woven para-aramid palm
- Felt para-aramid back and cuff
- T-Gard N260 liner
- Woven para-aramid palm and felt para-aramid back and cuff
- Lined with T-Gard® N260 meta-aramid thermal lining
- Wear seams are welted for additional protection
- All seams are sewn with heat-resistant aramid thread for extra durability
- Suitable for Foundry and Furnace work
Standards:
- AS/NZS 2161.3 (EN388) – 3544
- AS/NZS 2161.4 (EN407) – 43433X
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY RD8200-TX10 Cable and Pipe Locator Kit – Radiodetection
The RD8200 is a professional-grade cable and pipe locator engineered for accuracy, reliability, and advanced diagnostics. Ideal for utility contractors, surveyors, and infrastructure teams, it delivers precise underground asset detection even in challenging environments. Combining the receiver with a powerful 10-Watt transmitter and clamp, crews can accurately identify target assets and reduce strike risk. Built for reliable, accountable damage prevention before excavation begins.
Easy to setup and use, along with a sun light readable display, a high performance audio system and vibration alerts ensure you’re always ready for challenging environments.
Cable Locator Key Features:
- Maximum Depth Readout: Up to 30m Cable/Pipe and 19.5m Sonde
- Depth Measurement Precision: ±3%
- Locate Accuracy: ±5% of depth
- Battery Life: Up to 13 hours
- Size: 64.8cm x 28.6cm x 12.5cm
- Weight: Approx. 2kg
- Simultaneous display of depth and current
- User configurable Compass, active modes and passive modes
- Peak, Null, Peak-Plus, Guidance Mode, Broad Peak
- All Sonde Frequencies (512Hz, 640Hz, 8kHz, 33kHz)
- 22 Locator Frequencies (From 512Hz to 200kHz)
- 14 Current Direction Frequencies 219.9Hz / 439.8Hz to 4096Hz / 8192Hz
- Fault Finding Modes 8kHz and 256Hz
- Dynamic Overload Protector
- Power (50/60 Hz selectable) broad band, selective harmonics
- Power, Power Filters, Radio, CPS (100/120Hz, no more CATV mode)
- Depth in Power Mode
- Sounds 3db higher than other locators, high Pitch option for noisy environments, speaker in back of unit
- 3.5mm headphone socket
- StrikeAlert Technology warns operators of buried cables via audible alerts and vibration
- Dynamic Overload Protection by filtering interference in electrically noisy environments
- Rugged, ergonomic design built for field durability and long work sessions
- High-visibility display with a screen readable even in direct sun light
- Audible and visual warning when user is swinging the locator excessively
Transmitter Key Features:
- Max Power Output: 10W
- Max Voltage Output: 90V
- Max Current Output: 0.5A
- Weight: Approx. 3kg
- 16 Active Frequencies, 8 Induction Frequencies
- 100mm Clamp
Standards:
- Cable Locator – IP65
- Transmitter – IP54
- EN 61010-1:2010
- EN 61326-1:2013
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Aluminised Furnace Jacket 1300mm – Elliotts
Elliotts Aluminised Furnace Jacket features a centre closure with an action back for greater movement. The T-Gard P190 Thermal Liner has been specifically designed for Furnace PPE. The Aluminised Furnace Jacket design is a generous fit and provides the wearer with 360 degrees of protection.
Key Features:
- Sizes Available: S, M, L, XL, 2XL, 3XL, 4XL
- Length: 1300mm
- Material: CA340 – Aluminised Carbon / Aramid + T-Gard P190 – 770gsm
- Standard design with action back for extra mobility
- Centre front closure with 50mm flame-resistant hook + loop closure with press studs and pull tab
- Sewn with heat resistant aramid thread for extra durability
- The T-Gard P190 is light weight and offers excellent thermal protection
- Proban lined collar for additional comfort which helps manage perspiration
- Suitable for Foundry and Furnace work
Standards:
- ISO 11612
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Aluminised Aramid Hood with Clear Visor – Glo-Safe
Glo-Safe Aluminised Aramid Hood with Clear Visor is manufactured from Aluminised Aramid with insulated wool lining. Complete with built in hard hat and dual polypropylene clear visors. This offers the wearer excellent protection against radiant heat and molten metal splash.
Key Features:
- One Size Fits All
- Complete with built in hard hat
- Dual polypropylene clear visors
- Replacement inner & outer visor available
- Sewn in aramid thread
- Excellent protection against radiant heat and molten metal splash
- Insulated with wool lining
- Available with gold heat resistant visor
- Made in Australia
Standards:
- BS.5438/6249 A rating
- BS.3791 Radiation – 285 seconds
(0 reviews)