VOLT SAFETY Insulation/Continuity Digital Multimeter MD 9070 – Metrel
Metrel’s MD 9070 is a high accuracy Insulation and continuity Multimeter which may be used in a CAT IV / 600 V environment. It’s dual digital display provides all needed data to the operator while it’s size ensures that it can be operated single handedly. The Insulation and Continuity Multimeter is equipped with a built-in VFD feature that makes the instrument capable of measuring true RMS values in accordance with frequency, performing PI/DAR measurements and diode test. The MD 9070 has a wide range of extra features, including data hold, memory, min / max, differential, auto power off, auto-ranging, frequency filter, lock feature, reset, relative function and more.
Key Features:
- Includes:
-
- Multimeter MD 9070 with rubber holster
- Test lead with probe, 2 pieces
- Insulated crocodile clip, 2 pieces
- Insulation/Continuity test lead with probe, 1 piece
- 1,5 V AA battery (IEC LR6), 4 pieces
- User manual
- Meter Dimensions: 103mm x 64.5mm x 208mm
- Meter Weight: 635g
- Insulation test voltages of 50V, 100V, 250V, 500V, 1000V
- TRMS accurate readings on sinusoidal and non-sinusoidal signals
- VFD feature makes the instrument capable of measuring the true values in accordance with frequency
- Auto-ranging so user can switch between auto and manual ranging
- Relative zero mode function for comparing the difference between signals or removing background noise
- MAX/MIN recording of maximum, minimum and average values
- Data Hold feature freezes the display for later view
- PI/DAR feature
- Backlight for working in dark conditions
Standards:
- CAT III 1000V
- CAT IV 600V
- IEC/EN61557-1
- IEC/EN61557-2
- IEC/EN61557-4
- IEC/UL/EN61010-1
- IEC/EN61010-2-030
- IEC/EN61010-2-033
- IEC/UL/EN61010-031
Related products
-
Clamp MetersVOLT SAFETY Clamp Meter AC Tester 3280-10F – Hioki
Hioki’s 3280-10F AC Tester is a versatile clamp meter designed for accurate and reliable electrical measurements, 1000A AC current and 600V AC/DC voltage. This clamp meter is ideal for electrical maintenance, industrial equipment, residential wiring and field work. It is useful for troubleshooting and maintaining electrical systems and measuring electrical current.
Key Features:
- Operating Temperature: -25C – 65C
- Weight: 100g
- Dimensions: 57mm x 175 mm x 16mm
- Includes:
- CR2032 Coin-Shaped lithium battery
- 9398 Carrying Case
- L9208 Test Lead
- Instruction manual
- Power Supply: 1x CR2032 Coin-Shaped lithium battery. continuous use 120 hours
- IP40 dustproof and waterproof (while in storage)
- 1000A AC current measurements to ±1.5%rdg ±5dgt accuracy
- 600V AC/DC voltage measurements to ±1.0%rdg ±3dgt accuracy
- True RMS AC measurements
- Digital backlit display
- CAT IV 300V (Current) / CAT III 600V (Current) / CAT III 300V (Voltage)
Standards:
- CAT IV 300 V (Current)
- CAT III 600 V (Current)
- CAT III 300 V (Voltage)
(0 reviews) -
Insulation TestersVOLT SAFETY 1kV Analog Insulation Tester 3490 – Hioki
The Hioki 3490 1kV Insulation Tester features all-in-one designs including built-in rugged cases and test lead storage compartments.
The 3490 is a 3-range, 250/500/1000V analogue insulation resistance meter with efficient functions and features to help shorten work time associated with field insulation testing.
Key Features:
- Size: 159mm x 177mm x 53mm
- Operating Temperature: 0C – 40C
- Measures Insulation Resistance (up to 4000 Mega ohms), AC Voltage (up to 600V) and low resistance (up to 30 Ohms)
- 3 Output Voltages for testing – 250VDC, 500VDC and 1000VDC
- Backlit LED to see the analogue screen in low light environments
- Durable 1.2m length test leads to take measurements
- Zero ohm adjustment to ensure correct readings
- Continuity Check at 200mA at 3 Ohm range
Standards:
- CE
- IP40 (Excluding terminals)
- EN61010
- EN612326
- EN61557-1
- EN61557-2
(0 reviews) -
Gas DetectorsVOLT SAFETY BW Solo Gas Detector – Honeywell
Honeywell BW Solo Gas Detector is a smart, simple and economical way to measure gases.
Key Features:
- Dimensions: 70mm x 67mm x 36mm
- Weight: 116g
- Alarms: Visual, vibrating, audible
- Detects and measures Oxygen (O2)
- O2: 0-30% v/v
- P&A is available for other models on request
- O2: 0-30% v/v
- Sensor can be replaced in the field to detect required gases
- Continuous LCD shows real-time gas concentrations
- Gas Detector designed to work from -40C to 60C.
- Sensors have different operating ranges. Refer to sensor specifications.
- Typical battery life of 12 months, 6 months for O2
- Six months of datalogging at 5 second intervals
- Compact and lightweight design makes the detector comfortable to wear
- Built-in concussion proof housing
Standards:
- IP66
- UL Classified Class I, Div. 1, Gr. A, B, C, D
- ATEX: : Sira 18ATEX2243 CE 2460 EX II 1G Ex ia IIC T4 Ga
(0 reviews) -
Insulation TestersVOLT SAFETY 10kV TeraOhm Insulation Tester MI 3211 – Metrel
Metrel’s TeraOhm 10kV Insulation Tester is a high power, portable, battery or mains powered test instrument with excellent IP protection (IP65), designed for analysing insulation resistance by using high DC test voltages of up to 10kV. Because of its robustness (CAT IV measuring category) and high immunity to radiated EM fields, it is best suited for demanding industrial environments. Touch screen or key manipulation via menu-driven LCD enables easy and transparent selection of different measurement methods and easy entry of data. Newly designed test leads have coded banana connectors for proper connection and locking to protect them against unwanted or accidental removal.
Key Features:
- Includes:
- Instrument MI 3211 TeraOhmHP 10kV Insulation Tester
- A 1794 HV test lead, 3m, Black banana plug/Crocodile clip – Shielded, 15kV
- A 1795 HV test lead, 3m, Blue banana plug/Crocodile clip – 15kV
- A 1793 HV test lead, 3m, Red banana plug/Crocodile clip – 15kV
- A 1728 Power cable, 2m, 3×0.75mm2, IEC C13/Type E connector
- A 1727 USB cable TypeA/B
- A 1772 Soft carrying bag, Size: XXL
- Metrel ES Manager BASIC Licence
- SW 1201 Metrel ES Manager (program installation)
- Short form instruction manual
- Manufacturer Calibration certificate
- Instrument Dimensions: 360mm x 160mm x 330mm
- Instrument Weight (with batteries, without accessories): 6.2kg
- Insulation resistance measurements of up to 20TΩ
- Coded banana connectors with locking feature
- Newly designed HV crocodiles with a better grip
- Li-ion battery 4400mAh
- Adjustable test voltage (50V to 10kV) 50V and 100V step
- 8 GB memory SD card for data saving
- Automatic discharge of test object after finished measurement
- Live voltage detection > 30V
- User-friendly and intuitive operation
- High voltage breakdown detection
- Programmable AUTO SEQUENCEs
- Auto adjustment function
- Measurement results in numerical and graphical form
- Isolated RS-232 and USB communication ports, Bluetooth interface
- High EM interferences protection: Input AC current noise rejection 8 mA, input AC voltage noise rejection 1.5kV
Standards:
- CAT IV 600V
- IEC/EN 61010-1
- IEC/EN 61010-031
- IEC/EN 61010-2-030
- IEC/EN 61010-2-034
(0 reviews) - Includes: