VOLT SAFETY 1kV Analog Insulation Tester 3490 – Hioki
The Hioki 3490 1kV Insulation Tester features all-in-one designs including built-in rugged cases and test lead storage compartments.
The 3490 is a 3-range, 250/500/1000V analogue insulation resistance meter with efficient functions and features to help shorten work time associated with field insulation testing.
Key Features:
- Size: 159mm x 177mm x 53mm
- Operating Temperature: 0C – 40C
- Measures Insulation Resistance (up to 4000 Mega ohms), AC Voltage (up to 600V) and low resistance (up to 30 Ohms)
- 3 Output Voltages for testing – 250VDC, 500VDC and 1000VDC
- Backlit LED to see the analogue screen in low light environments
- Durable 1.2m length test leads to take measurements
- Zero ohm adjustment to ensure correct readings
- Continuity Check at 200mA at 3 Ohm range
Standards:
- CE
- IP40 (Excluding terminals)
- EN61010
- EN612326
- EN61557-1
- EN61557-2
Related products
-
Clamp MetersVOLT SAFETY Clamp Meter with Power Function MD 9273 – Metrel
Metrel’s MD 9273 TRMS Clamp Meter with Power Function is a versatile and accurate tool for measuring electrical parameters. With Bluetooth connectivity to other Metrel products (MI 3155, MI 3152, and MI 3325), it allows for seamless integration and remote data monitoring. The Clamp Meter with Power Function features a 28mm jaw size, a shielded design for use in noisy environments, and precise measurements of AC current and voltage. Advanced functions include a 128Hz notch filter for cable tracing, intelligent loss analysis, and peak value display.
Key Features:
- Includes:
- MD 9273 Bluetooth TRMS Leakage Clamp with Power Functions
- Test lead with probe, 2 pieces
- AMD 9028 Alligator clip, 2 pieces
- 1.5V battery, type AA, 2 pieces
- Pouch
- Instruction manual
- Manufacturer Calibration certificate
- Meter Dimensions: 185mm x 62mm x 42mm
- Meter Weight: 210g
- Jaw size: 28mm
- MAX/MIN/HOLD mode: displays maximum, minimum or last measured value
- 128 Hz notch filter for cable tracing
- TRMS for accurate measurements on sinusoidal and non-sinusoidal signals
- Shielded jaw allows the clamp meter to be used in the noisiest environments
- Accurate readings of AC current with an accuracy of 0.8% and a base resolution of 0.01mA and voltage with an accuracy of 0.5% and a base resolution of 0.01V
- Measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement)
- Complex algorithms detect loss and allow determining possible reasons for current loss
- Measures current or voltage harmonic components and a percentage value of a harmonic up to the 19th
- Dual display allows readings to be displayed along with Total Harmonic Distortion (THD) or Power Factor (PF)
- The peak value of the waveform or crest factor can be displayed
- Bluetooth connection to other Metrel products MI 3155, MI 3152 and MI 3325
- Inrush current recording with other Metrel products MI 3155, MI 3152 and MI 3325
Standards:
- CAT III 600V
- CAT IV 300V
- IEC/EN 61010-031
- IEC/EN 61010-2-030
- IEC/EN 61010-2-032
- IEC/EN 61010-2-033
(0 reviews) - Includes:
-
Electrical TestersVOLT SAFETY Digital RCD Tester 5406A – Kyoritsu
The Kyoritsu Digital RCD Tester is an essential tool for electricians and safety professionals, designed to efficiently test residual current devices (RCDs) for functionality and reliability. This compact and user-friendly tester features a clear digital display that provides accurate readings of trip times and current ratings, ensuring compliance with safety standards. With multiple test current settings, including 30mA, 100mA, and 300mA, it allows for versatile applications across various electrical systems. The tester’s robust design is built to withstand the rigors of daily use, while its intuitive interface makes it easy to operate, even in challenging environments. Whether conducting routine maintenance or troubleshooting, the Kyoritsu Digital RCD Tester delivers precise results, promoting electrical safety and performance.
Key Features:
- Dimensions: 167mm x 186mm x 89mm
- Weight: 800g
- Rated Tripping Current: 10/20/30/200/300/500mA
- Trip Current Duration: 1000ms, 200ms (×5)
- Includes:
- 7123 Australian Plug Test Lead
- 9121 Shoulder Strap
- 9147 Cord Case
- Instruction manual
- 3 LEDs for checking correct wiring status.
- 0 and 180 degree phase angle switch permits quick tests and consistent readings.
- Digital read-out of tripping time.
- Test of a large kind of RCDs, Standard, Selective, AC and A(DC sensitive breakers).
- Constant current source circuitry ensures that a fluctuating mains voltage does not affect the accuracy of readings.
- Large custom digital display readout.
- Visual indication of reversed phase and neutral wiring at socket.
Standards:
- CAT III 300V
- IEC 61557-1,-6
- IEC 61010-2-031
- IEC 60529 (IP54)
(0 reviews) -
Insulation TestersVOLT SAFETY Insulation/Continuity Digital Multimeter MD 9070 – Metrel
Metrel’s MD 9070 is a high accuracy Insulation and continuity Multimeter which may be used in a CAT IV / 600 V environment. It’s dual digital display provides all needed data to the operator while it’s size ensures that it can be operated single handedly. The Insulation and Continuity Multimeter is equipped with a built-in VFD feature that makes the instrument capable of measuring true RMS values in accordance with frequency, performing PI/DAR measurements and diode test. The MD 9070 has a wide range of extra features, including data hold, memory, min / max, differential, auto power off, auto-ranging, frequency filter, lock feature, reset, relative function and more.
Key Features:
- Includes:
-
- Multimeter MD 9070 with rubber holster
- Test lead with probe, 2 pieces
- Insulated crocodile clip, 2 pieces
- Insulation/Continuity test lead with probe, 1 piece
- 1,5 V AA battery (IEC LR6), 4 pieces
- User manual
- Meter Dimensions: 103mm x 64.5mm x 208mm
- Meter Weight: 635g
- Insulation test voltages of 50V, 100V, 250V, 500V, 1000V
- TRMS accurate readings on sinusoidal and non-sinusoidal signals
- VFD feature makes the instrument capable of measuring the true values in accordance with frequency
- Auto-ranging so user can switch between auto and manual ranging
- Relative zero mode function for comparing the difference between signals or removing background noise
- MAX/MIN recording of maximum, minimum and average values
- Data Hold feature freezes the display for later view
- PI/DAR feature
- Backlight for working in dark conditions
Standards:
- CAT III 1000V
- CAT IV 600V
- IEC/EN61557-1
- IEC/EN61557-2
- IEC/EN61557-4
- IEC/UL/EN61010-1
- IEC/EN61010-2-030
- IEC/EN61010-2-033
- IEC/UL/EN61010-031
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter AC Tester 3280-10F – Hioki
Hioki’s 3280-10F AC Tester is a versatile clamp meter designed for accurate and reliable electrical measurements, 1000A AC current and 600V AC/DC voltage. This clamp meter is ideal for electrical maintenance, industrial equipment, residential wiring and field work. It is useful for troubleshooting and maintaining electrical systems and measuring electrical current.
Key Features:
- Operating Temperature: -25C – 65C
- Weight: 100g
- Dimensions: 57mm x 175 mm x 16mm
- Includes:
- CR2032 Coin-Shaped lithium battery
- 9398 Carrying Case
- L9208 Test Lead
- Instruction manual
- Power Supply: 1x CR2032 Coin-Shaped lithium battery. continuous use 120 hours
- IP40 dustproof and waterproof (while in storage)
- 1000A AC current measurements to ±1.5%rdg ±5dgt accuracy
- 600V AC/DC voltage measurements to ±1.0%rdg ±3dgt accuracy
- True RMS AC measurements
- Digital backlit display
- CAT IV 300V (Current) / CAT III 600V (Current) / CAT III 300V (Voltage)
Standards:
- CAT IV 300 V (Current)
- CAT III 600 V (Current)
- CAT III 300 V (Voltage)
(0 reviews)