VOLT SAFETY BW Max XT II Gas Detector – Honeywell
Honeywell’s BW Max XT II Gas Detector is a smart, simple and economical way to ensure compliance.
Key Features:
- Dimensions: 131mm x 70mm x 52 mm
- Weight: 328g
- Alarms: Visual, vibrating, audible
- Detects and measures H2S (Hydrogen Sulfide), CO (Carbon Monoxide), O2 (Oxygen) and LEL (Combustible Gases)
- H2S: 0-200ppm
- CO: 0-1000ppm
- O2: 0-30% vol.
- LEL: 0-100%
- Continuous LCD shows real-time gas concentrations
- Rated to work in extreme environments from -20C to 50C
- 8 – 13 hour battery run time
- 375 hours of datalogging at 15 second intervals
- One button operation with robust, motorised pump
- Compact and lightweight design makes the detector comfortable to wear
- Built-in concussion proof boot
- Compatible with MicroDock II
Standards:
- IP66
- UL Classified Class I, Div. 1, Gr. A, B, C, D
- ATEX: CE, Ex II 1 G Ga Ex ia IIC T4
Related products
-
Gas DetectorsVOLT SAFETY Micro 4 Gas Detector – WatchGas
The WatchGas SST Micro (SST4 Micro) is a rugged, ultra-compact 4 gas detector built on Solid Polymer Technology (SPT) — delivering best-in-class sensor response times with outstanding humidity and temperature stability.
Key Features:
- Detects: CO / H2S / O2 / LEL (Low-Power Catalytic Bead)
- 200-hour runtime with NDIR sensor option; 48hr with LPC
- IP65/68 rated — submersible and dust-tight
- NFC configuration + induction charging (no connectors to corrode)
- One-button operation — easy to use with gloved hands
- Configurable sensor library to suit specific applications
- Larger backlit screen; fastest T90 response time in its class
- Compatible with WatchGas SST Calibration Docking Station
- Double-shot moulded housing with screen bumpers
- Protected serial number to ensure better asset management
- Replaceable clips — without having to replace the whole back plate
- Comes with the Gas Detector, Induction Charger, Testing Cap and Hose
Confined Space Entry:
The SST Micro is purpose-built for confined space pre-entry and continuous monitoring. It meets the requirements for O2, LEL, CO, and H2S monitoring in accordance with Australian confined space regulations.Standards:
- IP65/68
- ATEX, IECEX, UKEX : LEL-LPC and LEL-CAT, II 1 G
- Ex ia IIC T4 Ga
- I M1 Ex ia I Ma
- LEL-IR II 1 G Ex ia op is IIC T4 Ga
- I M1 Ex ia op is I Ma
- EMC Directive 2014/30/EU
Warranty:
- 3 year manufacturer warranty
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter with Power Function MD 9273 – Metrel
Metrel’s MD 9273 TRMS Clamp Meter with Power Function is a versatile and accurate tool for measuring electrical parameters. With Bluetooth connectivity to other Metrel products (MI 3155, MI 3152, and MI 3325), it allows for seamless integration and remote data monitoring. The Clamp Meter with Power Function features a 28mm jaw size, a shielded design for use in noisy environments, and precise measurements of AC current and voltage. Advanced functions include a 128Hz notch filter for cable tracing, intelligent loss analysis, and peak value display.
Key Features:
- Includes:
- MD 9273 Bluetooth TRMS Leakage Clamp with Power Functions
- Test lead with probe, 2 pieces
- AMD 9028 Alligator clip, 2 pieces
- 1.5V battery, type AA, 2 pieces
- Pouch
- Instruction manual
- Manufacturer Calibration certificate
- Meter Dimensions: 185mm x 62mm x 42mm
- Meter Weight: 210g
- Jaw size: 28mm
- MAX/MIN/HOLD mode: displays maximum, minimum or last measured value
- 128 Hz notch filter for cable tracing
- TRMS for accurate measurements on sinusoidal and non-sinusoidal signals
- Shielded jaw allows the clamp meter to be used in the noisiest environments
- Accurate readings of AC current with an accuracy of 0.8% and a base resolution of 0.01mA and voltage with an accuracy of 0.5% and a base resolution of 0.01V
- Measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement)
- Complex algorithms detect loss and allow determining possible reasons for current loss
- Measures current or voltage harmonic components and a percentage value of a harmonic up to the 19th
- Dual display allows readings to be displayed along with Total Harmonic Distortion (THD) or Power Factor (PF)
- The peak value of the waveform or crest factor can be displayed
- Bluetooth connection to other Metrel products MI 3155, MI 3152 and MI 3325
- Inrush current recording with other Metrel products MI 3155, MI 3152 and MI 3325
Standards:
- CAT III 600V
- CAT IV 300V
- IEC/EN 61010-031
- IEC/EN 61010-2-030
- IEC/EN 61010-2-032
- IEC/EN 61010-2-033
(0 reviews) - Includes:
-
Electrical TestersVOLT SAFETY Digital RCD Tester 5406A – Kyoritsu
The Kyoritsu Digital RCD Tester is an essential tool for electricians and safety professionals, designed to efficiently test residual current devices (RCDs) for functionality and reliability. This compact and user-friendly tester features a clear digital display that provides accurate readings of trip times and current ratings, ensuring compliance with safety standards. With multiple test current settings, including 30mA, 100mA, and 300mA, it allows for versatile applications across various electrical systems. The tester’s robust design is built to withstand the rigors of daily use, while its intuitive interface makes it easy to operate, even in challenging environments. Whether conducting routine maintenance or troubleshooting, the Kyoritsu Digital RCD Tester delivers precise results, promoting electrical safety and performance.
Key Features:
- Dimensions: 167mm x 186mm x 89mm
- Weight: 800g
- Rated Tripping Current: 10/20/30/200/300/500mA
- Trip Current Duration: 1000ms, 200ms (×5)
- Includes:
- 7123 Australian Plug Test Lead
- 9121 Shoulder Strap
- 9147 Cord Case
- Instruction manual
- 3 LEDs for checking correct wiring status.
- 0 and 180 degree phase angle switch permits quick tests and consistent readings.
- Digital read-out of tripping time.
- Test of a large kind of RCDs, Standard, Selective, AC and A(DC sensitive breakers).
- Constant current source circuitry ensures that a fluctuating mains voltage does not affect the accuracy of readings.
- Large custom digital display readout.
- Visual indication of reversed phase and neutral wiring at socket.
Standards:
- CAT III 300V
- IEC 61557-1,-6
- IEC 61010-2-031
- IEC 60529 (IP54)
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter Carry Case – Hioki
Secure your equipment with the Hioki C0203 Carrying Case for Clamp-On AC/DC Meters. Hioki’s Clamp Meter Carry Case’s robust design will keep your equipment protected, so you can bring it with you wherever you need it. Plus, by storing your tool in this reliable case, you are maximizing its longevity and efficiency.
Key Features
- Designed for Hioki Clamp-On AC/DC Meters
- Robust design for everyday travel and storage
- Maximizes the operating life of your equipment
(0 reviews)