VOLT SAFETY Micro 4 Gas Detector – WatchGas
The WatchGas SST Micro (SST4 Micro) is a rugged, ultra-compact 4 gas detector built on Solid Polymer Technology (SPT) — delivering best-in-class sensor response times with outstanding humidity and temperature stability.
Key Features:
- Detects: CO / H2S / O2 / LEL (Low-Power Catalytic Bead)
- 200-hour runtime with NDIR sensor option; 48hr with LPC
- IP65/68 rated — submersible and dust-tight
- NFC configuration + induction charging (no connectors to corrode)
- One-button operation — easy to use with gloved hands
- Configurable sensor library to suit specific applications
- Larger backlit screen; fastest T90 response time in its class
- Compatible with WatchGas SST Calibration Docking Station
- Double-shot moulded housing with screen bumpers
- Protected serial number to ensure better asset management
- Replaceable clips — without having to replace the whole back plate
- Comes with the Gas Detector, Induction Charger, Testing Cap and Hose
Confined Space Entry:
The SST Micro is purpose-built for confined space pre-entry and continuous monitoring. It meets the requirements for O2, LEL, CO, and H2S monitoring in accordance with Australian confined space regulations.
Standards:
- IP65/68
- ATEX, IECEX, UKEX : LEL-LPC and LEL-CAT, II 1 G
- Ex ia IIC T4 Ga
- I M1 Ex ia I Ma
- LEL-IR II 1 G Ex ia op is IIC T4 Ga
- I M1 Ex ia op is I Ma
- EMC Directive 2014/30/EU
Warranty:
- 3 year manufacturer warranty
Related products
-
Gas DetectorsVOLT SAFETY BW Max XT II Gas Detector – Honeywell
Honeywell’s BW Max XT II Gas Detector is a smart, simple and economical way to ensure compliance.
Key Features:
- Dimensions: 131mm x 70mm x 52 mm
- Weight: 328g
- Alarms: Visual, vibrating, audible
- Detects and measures H2S (Hydrogen Sulfide), CO (Carbon Monoxide), O2 (Oxygen) and LEL (Combustible Gases)
- H2S: 0-200ppm
- CO: 0-1000ppm
- O2: 0-30% vol.
- LEL: 0-100%
- Continuous LCD shows real-time gas concentrations
- Rated to work in extreme environments from -20C to 50C
- 8 – 13 hour battery run time
- 375 hours of datalogging at 15 second intervals
- One button operation with robust, motorised pump
- Compact and lightweight design makes the detector comfortable to wear
- Built-in concussion proof boot
- Compatible with MicroDock II
Standards:
- IP66
- UL Classified Class I, Div. 1, Gr. A, B, C, D
- ATEX: CE, Ex II 1 G Ga Ex ia IIC T4
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter AC/DC Tester CM4371-50 – Hioki
Hioki’s CM4371-50 model is a 600 A True RMS clamp meter designed with robust jaws and an IP54-rated dustproof and waterproof enclosure, allowing professionals to work efficiently in demanding environments. This includes tasks such as developing, repairing, and maintaining equipment like electric vehicles.
Key Features:
- Operating Temperature: -40C – 400C
- Weight: 340g
- Dimensions: 65mm x 215mm x 35mm
- Jaw Diameter: φ33 mm (1.30 in)
- AC measurement system: True RMS
- Includes:
- LR03 Alkaline battery ×2
- C0203 Carrying Case
- L9300 Test Lead
- Instruction manual x2
- Operating Precautions
- Power Supply: LR03 Alkaline battery ×2, continuous use 40hours
- DC Current Range: 20.00 A/600.0 A, Basic accuracy: ±1.3% rdg. ±0.08 A (20 A range)
- AC Current Range: 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy: 45-66 Hz: ±1.3% rdg. ±0.08 A (at 20 A)
- DC Voltage Range: 600.0 ｍV to 1000 V
- AC Voltage Range: 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 – 66 Hz: ±0.9% rdg. ±0.003 V (at 6 V)
- IP54 dustproof and waterproof (while in storage)
- Digital backlit display
- CAT IV 600V / CAT III 1000V
Standards:
- CAT IV 600 V
- CAT III 1000 V
(0 reviews) -
Insulation TestersVOLT SAFETY Insulation/Continuity Digital Multimeter MD 9070 – Metrel
Metrel’s MD 9070 is a high accuracy Insulation and continuity Multimeter which may be used in a CAT IV / 600 V environment. It’s dual digital display provides all needed data to the operator while it’s size ensures that it can be operated single handedly. The Insulation and Continuity Multimeter is equipped with a built-in VFD feature that makes the instrument capable of measuring true RMS values in accordance with frequency, performing PI/DAR measurements and diode test. The MD 9070 has a wide range of extra features, including data hold, memory, min / max, differential, auto power off, auto-ranging, frequency filter, lock feature, reset, relative function and more.
Key Features:
- Includes:
-
- Multimeter MD 9070 with rubber holster
- Test lead with probe, 2 pieces
- Insulated crocodile clip, 2 pieces
- Insulation/Continuity test lead with probe, 1 piece
- 1,5 V AA battery (IEC LR6), 4 pieces
- User manual
- Meter Dimensions: 103mm x 64.5mm x 208mm
- Meter Weight: 635g
- Insulation test voltages of 50V, 100V, 250V, 500V, 1000V
- TRMS accurate readings on sinusoidal and non-sinusoidal signals
- VFD feature makes the instrument capable of measuring the true values in accordance with frequency
- Auto-ranging so user can switch between auto and manual ranging
- Relative zero mode function for comparing the difference between signals or removing background noise
- MAX/MIN recording of maximum, minimum and average values
- Data Hold feature freezes the display for later view
- PI/DAR feature
- Backlight for working in dark conditions
Standards:
- CAT III 1000V
- CAT IV 600V
- IEC/EN61557-1
- IEC/EN61557-2
- IEC/EN61557-4
- IEC/UL/EN61010-1
- IEC/EN61010-2-030
- IEC/EN61010-2-033
- IEC/UL/EN61010-031
(0 reviews) -
MetersVOLT SAFETY Multi Function Tester MI 3152 – Metrel
Metrel’s Multi Function Tester MI 3152 InstalTest IT-XC is an advanced multi-functional measuring instrument, designed specifically for testing in industry. The already well known functions like complete installation safety testing according to IEC/EN 61557 and Pre-Programmed AUTO SEQUENCE testing of TN, TT and IT earthing systems are managed by a completely new user interface based on large colour touch screen display. The Multi Function Tester MI 3152 IT-XC is pre-set with AS/NZS3017 limits for pass/fail indication on tests.
Key Features:
- Includes:
- Instrument MI3152 Instaltest XC
- Mains measuring cable, 1.5m (AU PLUG)
- Test lead, 1.5m (brown, blue, green)
- Test probe, 3 pcs (brown, blue, green)
- Crocodile clip, 3 pcs (brown, blue, green)
- Test lead, green, 20m
- USB cable
- RS232-PS/2 cable
- AC adaptor (charger)
- NIMH rechargeable batteries, AA, 6 pcs
- Soft carry bag
- Soft carrying neck belt
- Quick guide manual
- ES Manager BASIC reporting software (download)
- Calibration certificate
- Instrument Dimensions: 230 x 1-3 x 115 mm
- Instrument Weight: 1.3kg
- High resolution colour touch screen, 4.3” TFT
- Insulation resistance with DC voltage from 50V to 1000V
- Built-in fuse tables for automatic evaluation of the line / loop impedance result
- Monitoring of all 3 voltages in real-time
- Automatic polarity reversal on continuity test
- Automated RCD testing procedure
- Barcode scanning of RCD for test/retest for faster testing
- Automated Impedance testing procedure (Z AUTO)
- Functional inspections
- Measurement filtering according to the selected area group
- Built-in charger and rechargeable batteries as standard accessory
Standards:
- CAT II 1000V
- CAT III 600V
- CAT IV 300V
- IEC/EN 61557-7, 10, 11, 12, 14
- IEC/EN 61010-1
- IEC/EN 61010-031
- IEC/EN 61010-2-030
- IEC/EN 61010-2-032
(0 reviews) - Includes: