KINCROME Ratchet Jack Stand 3,000kg pair
Specifications
| Brand | KINCROME |
| Base Dimensions | 235 x 200mm |
| Lift Height | 143mm |
| Maximum Height | 448mm |
| Minimum Height | 305mm |
| Pieces | 2 |
| Saddle Size | 93 x 34mm |
| Standard | AS 2538:2016 |
| Warranty | 2 Years |
| Working Load Limit | 3,000kg |
| Material | Heavy Duty Steel |
| Length (mm) | 235 |
| Width (mm) | 200 |
| Height (mm) | 448 |
| Weight (kg) | 12.2 |
Features
Related products
-
Stands & Ramps
TQB BRANDS Auxiliary Stand 7,000kg
The BORUM Industrial Heavy Duty Auxiliary Stand is a reinforced pin style vehicle stand with a heavy duty design and support bracing system to sustain heavy vehicle loads up to 7,000kg. It’s adjustable to match the job with a 1255mm minimum lift height and 1905mm maximum lift height !! Featuring Heavy-Duty Industrial design, this tough stand is ideal for use under 2 post and 4 post vehicle lifts. With adjustable height increments, 3 choices of saddle attachments, and a stable tripod design, the feet (with base plates) securely hold this auxiliary stand in place when the spring loaded swivel castor wheels are under load. This heavy duty stand is mobile when needed and stable under load, so its a very handy peice of equipment when working under a vehicle lift. This tripod design ensures complete stability, even when your workshop floor is not perfectly flat.
Features
- Heavy duty design and support bracing system to sustain heavy ve
hicle loads - Manufactured from high-grade steel and built to exacting standards for quality and durability
- Fitted with spring loaded castor wheels to ensure easy movement around the workshop
- Fitted with spring loaded support beam
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High strength locking pin
- Controlled pin holes for easy height adjustments
- Turned post slide for easy quick adjustments
Specifications
- Safe Working Capacity: 7,000kg
- Maximum Height: 1905mm
- Minimum Height: 1295mm
- 3 saddle options: 90mm, 120mm, up to 150mmØ
- Adjustable Pin Heights: 8 (75mm increments)
- Distance between Caster wheels: 630mm (Centre wheel to centre wheel measurement)
- Nett Weight: 65kg
- Carton: 1130 x 370 x 320mm
- Weight: 68kg
Intended Use
To support and/or stabilise a vehicle that is raised by a 2or4 post hoist or in-ground lift. Should always be used in pairs.
NOTE: Sold individually but recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) - Heavy duty design and support bracing system to sustain heavy ve
-
Stands & Ramps
TQB BRANDS Jack Stand 15,000kg
The BORUM Industrial Ultra Heavy Duty Jack Stand is a reinforced pin style jack stand with industrial quality design and support bracing system to sustain heavy loads up to 15,000kg. Adjusts to match the job with a 645mm minimum lift height and 1077mm maximum lift height !! Featuring an Ultra Heavy-Duty Industrial design, these tough stands are ideal for construction, farm, truck, bus, earth moving equipment and fleet vehicle maintenance workshop use.
Features
- Manufactured from high-grade steel and built to exacting standards for quality and durability
- Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust
- Paint is oil, grease and dirt-resistant for easy cleanup
- High strength locking pin
- Controlled pin holes for easy height adjustments
- Turned post slide for easy quick adjustments
- Heavy-gauge steel Gusseted uprights prevent distortion or twisting
- Rugged base provides plenty of stability
- Conveniently located carry handle
- Sold individually (not in pairs)
Specifications
- Safe Working Capacity: 15,000kg (individually rated but must be used in pairs for safe usage)
- Maximum Height: 1077mm
- Minimum Height: 645mm
- Adjustable increments: 70mm
- Saddle Width: 140mm
- Base Dimensions: 460 x 460mm
- Carton: 670 x 380 x 380mm (Single unit)
- Weight: 35.4kg (each)
Intended Use
Heavy duty fleet and maintenance workshops where a lifted vehicle or trailer is to be supported before conducting servicing or repair work.
NOTE: Sold individually but recommended to be used in pairs
IMPORTANT: NEVER get beneath a vehicle that is only supported by a jack. ALWAYS chock the vehicle wheels and use jack stands.
(0 reviews) -
Motorcycle Lifting
KINCROME Motorcycle Track Stand – Red
Specifications
Brand KINCROME Capacity 300kg Finish UV Stabilised Powder Coat Warranty Kincrome Quality Colour Red Material Heavy Duty Steel Features
Heavy-duty steel constructionUV stabilised powdercoat10mm thick rubber topRubber feet for stability(0 reviews) -
Motorcycle Lifting
KINCROME Motorcycle Track Stand – Blue
Specifications
Brand KINCROME Capacity 300kg Finish UV Stabilised Powder Coat Warranty Kincrome Quality Colour Blue Material Heavy Duty Steel Features
Heavy-duty steel constructionUV stabilised powdercoat10mm thick rubber topRubber feet for stability(0 reviews)




