32mm
Showing all 27 results
-
Grade 100 FittingsAUSTLIFT G100 Chain Connector Yoke
- Quenched and Tempered Alloy Steel.
- At least 25% greater WLL than traditional G80 products.
- Manufactured in accordance with EN 1677- 1 and ASTM A952/ A952M.
- Certified by DGUV GS-OA-15-05
- Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
- Design Factor 4:1.
- Fatigue rated to 20,000 cycles at 1.5 times the WLL. Suitable for use with both Grade 80 and Grade 100 chain.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grade 100 FittingsAUSTLIFT G100 Eye Grab Hook Yoke
- Quenched and Tempered Alloy Steel.
- At least 25% greater WLL than traditional G80 products.
- Manufactured in accordance with DIN 5692, EN 1677-1 and ASTM A952/A 952M.
- Certified by DGUV GS-MO-15-05.
- Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
- Design Factor 4:1.
- Fatigue rated to 20,000 cycles at 1.5 times the WLL.
- Tempering temperature minimum 400°C
- Not for use with Omega Link
- Enables full WLL while in use, thanks to supporting wings which prevent chain link deformation.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grade 100 FittingsAUSTLIFT G100 Sling Hook Eye w/Latch Yoke
- Quenched and Tempered Alloy Steel.
- At least 25% greater WLL than traditional G80 products.
- Manufactured in accordance with EN 1677- 2 and ASME B30.26, ASME B30.10, PAS1061.
- Certified by DGUV GS-OA-15-05
- Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
- Design Factor 4:1.
- Fatigue rated to 20,000 cycles at 1.5 times the WLL.
- Tempering temperature minimum 400°C
- Magnaflux crack detection is performed 100% on each batch.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grade 80 FittingsAUSTLIFT G80 Chain Connector Type CL
Austlift chain connectors are commonly used to connect head rings, chain, hooks and other lifting components for chain slings and variable type slings.
• Marked with chain sizes, batch number, grade and Austlift branded with manufacture quality mark.
• Batch tested, test certificates available upon request.
• Spare pin and studs are available.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grade 80 FittingsAUSTLIFT G80 Chain Connector Yoke
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grade 80 FittingsAUSTLIFT G80 Grab Hook Eye Type GE
GE type eye grab hook provides the flexibility to shorten chain sling and can be used for back-hooking. Austlift grab hooks come with supporting lugs to allow no reduction of the working load limit. The eye is designed for easy connection of chain connector.
• Marked with sizes, batch number, grade and Austlift branded with manufacture quality mark.
• Batch tested, test certificates available upon request.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grade 80 FittingsAUSTLIFT G80 Grab Hook Eye Type Yoke
Not for use with Omega Link Item.
No reduction of working load limit, thanks to supporting wings which prevent chain link deformation.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grade 80 FittingsAUSTLIFT G80 Self Locking Hook Eye Type LE
Austlift LE type eye self-locking hook allows the hook to remain open until the load is engaged. The hook will not open until the trigger at the back is pressed. The eye style allows easy connection to chain connectors, shackles and wire rope slings.
• Marked with chain sizes, batch number, grade and Austlift branded with manufacture quality mark.
• Batch tested, test certificates available upon request.
• Spare trigger kits are available.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Grade 80 FittingsAUSTLIFT G80 Sling Hook Eye c/w Safety Latch Type SE
Austlift SE type eye sling hooks are a general purpose hook suitable for most slinging applications. They come with a heavy duty latch for added safety. Eye type allows easy connection to coup links and can be
attached to lifting apparatus.
• Marked with chain sizes, batch number, grade and Austlift branded with manufacture quality mark.
• Batch tested, test certificates available upon request.
• Spare safety latch kits are available.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Split PinsHOBSON Split Pin Mild Steel Zinc Metric M1.6
Split Pin Mild Steel Zinc Metric M1.6
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M2
Split Pin Mild Steel Zinc Metric M2
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M2.5
Split Pin Mild Steel Zinc Metric M2.5
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M3.2
Split Pin Mild Steel Zinc Metric M3.2
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M4
Split Pin Mild Steel Zinc Metric M4
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M5
Split Pin Mild Steel Zinc Metric M5
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Split Pins
HOBSON Split Pin Mild Steel Zinc Metric M6.3
Split Pin Mild Steel Zinc Metric M6.3
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1/2" Impact SocketsITM 1/2″ Drive Deep Metric
1/2″ Drive 6pt Deep Impact Socket Metric
8mm-36mm Available
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
1/2" Impact SocketsITM 1/2″ Drive Metric
1/2″ Drive 6pt Impact Socket Metric
8mm-36mm Available
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutter/SetsITM 25mm Depth Annular Cutter
M2AL HIGH SPEED STEEL MATERIAL.
M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is lesssusceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4″”) universal shank for cutters up to and including 60mm diameter. Featuring 2 flat sections to suit most magnetic base drilling machines. Cutters of diameters 61mm and above feature a 31.75mm, 1-1/4″ Weldon shank. M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
3/4" Impact SocketsITM 3/4″ Drive Deep Metric
3/4″ Drive 6pt Deep Impact Socket Metric
19mm-65mm
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
3/4" Impact SocketsITM 3/4″ Drive Metric
3/4″ Drive 6pt Impact Socket Metric
17mm-65mm
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Annular Cutter/Sets
ITM 50mm Depth Annular Cutter
M2AL HIGH SPEED STEEL MATERIAL.
M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.STEP HARDENED PROCESS.
This state of the art manufacturing process produces cutters with extremely hard tooth tips for increased cutter performance, while maintaining a softer body which is lesssusceptible to breakage than standard high speed steel cutters.MULTI-CUT GEOMETRY.
Provides smooth and fast cutting, with decreased chatter. This also increases the cutters ability to remove swarf away from the cut, and helps to enhance centring.FULLY GROUND WITH INTERNAL RELIEF.
This feature allows Holemaker cutters to produce reamed quality, burr-free holes, and also helps to reduce torque and horsepower requirements.UNIVERSAL SHANK.
19.05mm (3/4″”) universal shank for cutters up to and including 60mm diameter. Featuring 2 flat sections to suit most magnetic base drilling machines. Cutters of diameters 61mm and above feature a 31.75mm, 1-1/4″ Weldon shank. M2AL high speed steel is a high alloy material with a hardness of up to 67.5 HRC, designed for increased endurance of the cutting edge and tool life.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sockets & WrenchesMILWAUKEE 1/2″ DRIVE METRIC DEEP 6-POINT SOCKET
Milwaukee’s range of 6-point Sockets with FOUR FLAT™ Sides have been designed from the ground up to be part of the most versatile socket family. Milwaukee® chrome sockets feature an innovative design with four parallel flat sides, which won’t roll away when they drop on the floor and are wrench-compatible. The socket sizes are stamped into the flats providing you with improved, easy-to-read visibility. Coming in both deep and standard sizes, each has optimised geometry on the internals to reduce bolt rounding and stripping. We back all our chrome sockets with a lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sockets & WrenchesMILWAUKEE 1/2″ DRIVE METRIC STANDARD 6-POINT SOCKET
Our 1/2″ Drive Metric 6-Point Socket with FOUR FLAT™ Sides was designed from the ground up to be part of the most versatile socket family. MILWAUKEE® 1/2″ drive sockets feature an innovative design with four parallel flat sides, which deter rolling and are wrench-compatible. The metric socket sizes are stamped into the flats providing you with improved, easy-to-read visibility. These deep and standard socket sizes have optimised geometry to reduce bolt rounding and stripping. We back all our 1/2” drive metric sockets with a lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Mechanics ToolsMILWAUKEE METRIC COMBINATION WRENCH
The Milwaukee® combination wrenches provide you with 25% more torque than smooth-faced wrenches with our innovative MAXBITE™ Open-End Grip. In addition to increased torque, MAXBITE™ also reduces the rounding and stripping of nuts and bolts over time. For added user benefits the wrench features an ergonomic I-Beam handle for optimised comfort and durability. Ink-filled size labels allow for easy identification and quick distinction between SAE and metric wrench sets. The Milwaukee® metric wrench sizes range from 6-36mm and is backed by Milwaukee’s lifetime guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Mechanics ToolsMILWAUKEE METRIC RATCHETING COMBINATION WRENCH
Our Metric Ratcheting Combination Wrenches feature 2.5 degrees of arc swing and 144 ratcheting positions, allowing quick and efficient work in tight spaces. This wrench has double-stacked pawls within the ratcheting mechanism, which increases durability and extends the life of the tool. The MAXBITE™ Open-End Grip improves the metric ratchet wrench’s grip on nuts and bolts, offering 25% more torque than smooth-faced wrenches. The combination wrench has an ergonomic I-Beam handle design for improved comfort and ink-filled size labels for easy size identification and quick distinction between SAE and metric sets. The MILWAUKEE® metric wrench sizes range from 8mm to 22mm and feature a Lifetime Guarantee.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Turnbuckles & ShacklesAUSTLIFT Bow Shackle Grade ‘S’
Austlift blue screw pin bow shackles are most commonly used for lifting applications, providing connections to chain, wire rope and other rated fittings within the marine, agricultural, mining and engineering industries.
• Conforms to AS2741 manufactured from Grade S material in bow configuration with screw pin hot dipped galvanised.
• Marked with working load limit in T, quality grade, batch numbered, nominal size in mm and supplier identification.
• Proof tested to 2 x working load limit, with a minimum break force of 6 x working load limit.
• Test certificates are available upon request. Also available in black color in all sizes upon request.
• Suitable for lifting applications.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page