16mm

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with EN 1677- 1 and ASTM A952/ A952M.
• Certified by DGUV GS-OA-15-05
• Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL. Suitable for use with both Grade 80 and Grade 100 chain.

Austlift GC type G100 clevis grab hooks provide the flexibility to shorten chain leg on a sling may also be used for back-hooking. Grab hooks come with supporting lugs to allow no reduction of the working load limit. The clevis is designed for ease of connection of chain.

• Marked with chain size, designation, grade, manufacture quality mark and Austlift branded.

• 25% higher work load limit than G80.

• Batch tested, test certificates available upon request.

Austlift LC type G100 clevis self-locking hook allows the hook to be easily closed with one hand, it will close itself when the load is engaged. The hook will not open until the trigger at the back is pressed. Clevis style allows easy connection to the chain.

• Marked with chain size, designation, grade, manufacture quality mark and Austlift branded.

• 25% higher work load limit than G80.

• Batch tested, test certificates available upon request.

• Spare trigger kits and load pins are available.

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with DIN PAS 1061 and ASTM A952/A 952M,EN 1677- 1.
• Certified by DGUV GS-OA-15-05
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL.
• Tempering temperature minimum 400°C
• Designed for the assembly of chain slings where wide throat openings are necessary.
• Before using the hook, check whether hooks without safety latches are allowed to be used for the particular application.

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with DIN PAS 1061 and ASTM A952/A 952M,EN 1677- 1.
• Certified by DGUV GS-OA-15-05
• Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL.
• Tempering temperature minimum 400°C
• Designed for the assembly of chain slings where wide throat openings are necessary.
• Before using the hook, check whether hooks without safety latches are allowed to be used for the particular application.

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with DIN PAS 1061, EN 1677-1 and ASTM A952/A 952M.
• Certified by DGUV GS-OA-15-05.
• Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL.
• Tempering temperature minimum 400°C
• Not for use with Omega Link
• Enables full WLL while in use, thanks to supporting wings which prevent chain link deformation.

Austlift LS type G100 swivel self-locking hook is a plain swivel that allows the hook to swivel as load is applied thus reducing the twist of a sling.

•WILL NOT SWIVEL UNDER LOAD.

Marked with chain size, designation, grade, manufacture quality mark and Austlift branded.

• 25% higher work load limit than G80.

• Batch tested, test certificates available upon request.

• Spare trigger kits are available.

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with EN 1677- 3 and ASME B30.26, ASME B30.10.
• Certified by DGUV GS-OA-15-05.
• Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL. Tempering temperature minimum 400°C
• Magnaflux crack detection is performed 100% on each batch.

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with EN 1677- 1 and ASME B30.26.
• Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL.
• Tempering temperature minimum 400°C
• The use of Clevis Clutch still allows 100% of the chain sling capacity.
• With the locking system and spring locking pin design to enhance security and prevent the chains from disengaging.

• Quenched and Tempered Alloy Steel.
• At least 25% greater WLL than traditional G80 products.
• Manufactured in accordance with EN 1677- 2 and ASME B30.26, ASME B30.10, PAS1061.
• Certified by DGUV GS-OA-15-05
• Proof Load tested at 2.5 times the WLL with certification for each batch manufactured.
• Design Factor 4:1.
• Fatigue rated to 20,000 cycles at 1.5 times the WLL.
• Tempering temperature minimum 400°C
• Magnaflux crack detection is performed 100% on each batch.

Austlift SE type G100 eye sling hooks are a general purpose hook suitable for most sling applications and come with a cast latch for added safety. Eye allows easy connection to coup links and can be attached to lifting apparatus.

• Marked with chain size, designation, grade, manufacture quality mark and Austlift branded.

• 25% higher work load limit than G80.

• Batch tested, test certificates available upon request.

Austlift Grade 100 Swivel Self-locking Hook has a ball bearing swivel to allow the hook to swivel under load.

• Assists in reducing the twist of sling as load is applied.
• Allows product to be rotated under load if used as a centre lifting point.
• Marked with chain size, designation, grade, manufacture quality mark and Austlift branded.
• 25% higher work load limit than G80.
• Batch tested, test certificates available upon request.
• Spare trigger kits are available.
• Fatigue tested > 20,000 times.

Austlift G80 clevis shackle, has been designed to use as a terminal end connecting directing to the chain at the clevis end.
• Marked with chain size, batch number, grade, Austlift branded with manufacture quality mark.
• Batch tested, test certificates available upon request.
• Spare latch kits are available.
• Safety factor 4 to 1.

GE type eye grab hook provides the flexibility to shorten chain sling and can be used for back-hooking. Austlift grab hooks come with supporting lugs to allow no reduction of the working load limit. The eye is designed for easy connection of chain connector.
• Marked with sizes, batch number, grade and Austlift branded with manufacture quality mark.
• Batch tested, test certificates available upon request.

Not for use with Omega Link Item.
No reduction of working load limit, thanks to supporting wings which prevent chain link deformation.

Austlift GLC type eye grip-locking hook allows the hook to remain open until the load is engaged. The hook will not open until the trigger at the back is pressed. Eye style allows easy connection to the chain and also has a unique design to prevent side loading of the latch.

• Marked with chain sizes, batch number, grade and Austlift branded with manufacture quality mark.
• Batch tested, test certificates available upon request.

• Spare trigger kits and load pins are available.

Austlift NE type eye grip-locking hook allows the hook to remain open until the load is engaged, the hook will not open until the trigger at the back is pressed. Eye style allows easy connection to the chain and also has a unique design to prevent side loading of the latch.
• Marked with chain sizes, batch number, grade and Austlift branded with manufacture quality mark.
• Batch tested, test certificates available upon request.
• Spare trigger kits are available.