Shop
Showing 3529–3564 of 12105 results
-
BandsawsITM Bandsaw, 220mm Cap, Swivel Head, Variable Speed 240v 1ph, Hyd Down Feed
Features
UNIQUE WG SERIES FEATURES:- Variable speed
- Control panel at front of saw
- Swivel head lock lever at front of saw
STANDARD FEATURES:
- 1 Way swivel head 0° to 60°
- Dual mode operation
- Manual trigger switch, or
- Control panel with hydraulic downfeed
- Industrial quality made in Taiwan
Specifications
Motor 1.5hp Single Phase (240V) Blade Speed Variable 20-85 mpm Blade Size 27mm x 0.9mm x 2460mm Weight 195kg Cutting Capacity Rectangular 90° 210 x 140mm Square 90° 215 x 215mm Square 45° 150 x 150mm (0 reviews) -
BandsawsITM Bandsaw, 227mm Cap, Swivel Head, Dual Mitre, 1 Speed 240v 1ph, Hyd Down Feed
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Dual direction heavy-duty vice.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1.5hp Single Phase (240V) Blade Speed Single Speed 72 mpm Blade Size 27mm x 0.9mm x 2460mm Bed Height 900mm Weight 285kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 220mm 215mm 260 x 105mm 45° Right 150mm 145mm 155 x 70mm 60° Right 90mm 85mm 90 x 80mm 45° Left 135mm 110mm 160 x 45mm (0 reviews) -
Bandsaws
ITM Bandsaw, 227mm Cap, Swivel Head, Dual Mitre, 2 Speed 415v 3ph, Hyd Down Feed
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Dual direction heavy-duty vice.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Optional blade tension gauge.
- Made in Taiwan.
Specifications
Motor 1.5hp Three Phase (415V) Blade Speed 2 Speed 36 / 72 mpm Blade Size 27mm x 0.9mm x 2460mm Bed Height 900mm Weight 285kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 220mm 215mm 260 x 105mm 45° Right 150mm 145mm 155 x 70mm 60° Right 90mm 85mm 90 x 80mm 45° Left 135mm 110mm 160 x 45mm (0 reviews) -
BandsawsITM Bandsaw, 240mm Cap, Swivel Head, Dual Mitre, 2 Speed 415v 3ph, Hyd Down Feed
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Variable speed motor for cutting a wide range of materials.
- Dual direction heavy-duty vice.
- Hydraulic blade tension gauge.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Made in Taiwan.
Specifications
Motor 2hp Three Phase (415V) Blade Speed 2 Speed 36 / 72 mpm Blade Size 27mm x 0.9mm x 2725mm Bed Height 895mm Weight 302kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 240mm 235mm 310 x 165mm 45° Right 195mm 185mm 195 x 130mm 60° Right 120mm 85mm 120 x 90mm 45° Left 165mm 140mm 195 x 60mm (0 reviews) -
BandsawsITM Bandsaw, 260mm Cap, Swivel Head, Dual Mitre, 2 Speed 415v 3ph, Hyd Down Feed
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Dual mode operation.
– Trigger switch with manual down feed for small quick cuts.
– Control panel with fully adjustable hydraulic down feed & automatic shut-off at end of cut, for cutting larger material. - Dual direction heavy-duty vice.
- Hydraulic blade tension gauge.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Safety emergency stop switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Made in Taiwan.
Specifications
Motor 2hp Three Phase (415V) Blade Speed 2 Speed 36 / 72mpm Blade Size 27mm x 0.9mm x 3160mm Bed Height 890mm Weight 410kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 260mm 260mm 350 x 250mm 45° Right 230mm 165mm 240 x 110mm 60° Right 150mm 90mm 150 x 90mm 45° Left 200mm 170mm 260 x 60mm (0 reviews) -
BandsawsITM Bandsaw, 260mm Cap, Swivel Head, Dual Mitre, 2 Speed 415v 3ph, Semi Automatic
Features
- 2-way swivel head enables from 0° to 60° mitre cuts.
- Semi-automatic machine.
- Dual direction heavy-duty vice.
- Hydraulic blade tension gauge.
- Incorporated recirculating coolant system.
- Brass chip brush to help prevent blade breakage.
- Adjustable material stop for repetitive production.
- Remote emergency stop non-voltage return safety switch.
- 12 months warranty.
- Comes complete with stand & blade.
- Made in Taiwan.
Specifications
Motor 2hp Three Phase (415V) Blade Speed 2 Speed 36 / 72mpm Blade Size 27mm x 0.9mm x 3160mm Bed Height 890mm Weight 530kg Cutting Capacity Cutting Angle Round Square Rectangle 90° 260mm 260mm 350 x 250mm 45° Right 230mm 165mm 240 x 110mm 60° Right 150mm 90mm 150 x 90mm 45° Left 200mm 170mm 260 x 60mm (0 reviews) -
Grinding MachinesITM Belt Grinder 1.5Kw 240V 1PH With Stand Belt Size 100 x 1500mm
Features
Quality, durable construction.
Made in Taiwan.
240 Volt Industrial Motor.
Smooth, low vibration operation.
Large sturdy base.Specifications
Motor: 1.5KW Single Phase 240V
Contact Wheel: 170 X 100mm
Platen Surface: 405 X 100mm
Grinding Belt: 1500 X 100mm(0 reviews) -
Belt Drive Drilling MachinesITM Bench Drill H.D 2m, 16mm Chuck 12 Speed 17″ Swing, .75Kw, 240V
Features
Extra heavy duty industrial drilling machine range. Made in Taiwan, these machines are equipped with heavy duty casting and construction for provenlasting durability in industrial workshops.Supplied With:.
– Drill Chuck & Arbor.
– Drill DriftSpecifications
Drilling Capacity: 23mm (7/8″)
Chuck: 16mm #2MT
Motor Power: 750W 240V
Spindle Travel: 85mm
Speed: 12 Spd 290-2330
Swing: 430mm
Table Size: ,350mm
Base Size: 505x278mm
Column Diameter: 80mm
Height: 1010mm
Weight : 72kg(0 reviews) -
Power ToolsITM Bench Drill Press
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Drilling Capacity (mm): 16mm (5/8″)
Spindle Taper: #2MT
Chuck: 3-16mm B16
Motor Power: 375W 240V
Spindle Travel (mm): 85
Speed: 16 Speed 180-2770
Swing (mm): 325
Table Size / Base Size (mm): 290 / 420×250
Column Diameter (mm): 72
Height (mm): 980
N.W. / G.W. (kg): 43 / 45Drill press vice to suit: VDP102
Cross slide vice to suit: TM130-100(0 reviews) -
Belt Drive Drilling MachinesITM Bench Drill Press, 13mm Cap, 5 Speed, 210mm Swing, 250W 240V
Features
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Specifications
Drilling Capacity (mm): 13mm (1/2″)
Chuck: 1.5-13mm B16
Motor Power: 250W 240V
Spindle Travel (mm): 50
Speed: 5 Speed 620-2620
Swing (mm): 210
Table Size / Base Size (mm): 160×160 / 290×190
Column Diameter (mm): 46
Height (mm): 580
N.W. / G.W. (kg): 15.5 / 16.5Drill press vice to suit: VDP078
(0 reviews) -
Belt Drive Drilling MachinesITM Bench Drill Press, 13mm Cap, 5 Speed, 260mm Swing, 375W 240V
Features
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Specifications
Drilling Capacity (mm): 13mm (1/2″)
Chuck: 1.5-13mm B16
Motor Power: 375W 240V
Spindle Travel (mm): 65
Speed: 5 Speed 620-2620
Swing (mm): 260
Table Size / Base Size (mm): 200×200 / 340×210
Column Diameter (mm): 58
Height (mm): 680
N.W. / G.W. (kg): 23.3 / 25.3Drill press vice to suit: VDP078
Cross slide vice to suit: TM130-100(0 reviews) -
Belt Drive Drilling MachinesITM Bench Drill Press, 2m, 16mm Cap, 16 Speed, 325mm Swing, 375W 240V
Features
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Specifications
Drilling Capacity (mm): 16mm (5/8″)
Spindle Taper: #2MT
Chuck: 3-16mm B16
Motor Power: 375W 240V
Spindle Travel (mm): 85
Speed: 16 Speed 180-2770
Swing (mm): 325
Table Size / Base Size (mm): 290 / 420×250
Column Diameter (mm): 72
Height (mm): 980
N.W. / G.W. (kg): 43 / 45Drill press vice to suit: VDP102
Cross slide vice to suit: TM130-100(0 reviews) -
Belt Drive Drilling MachinesITM Bench Drill Press, 2m, 16mm Cap, 16 Speed, 360mm Swing, 450W 240V
Features
Quality casting, construction & componentry.
Emergency stop.
NVR safety switch.Each Unit Supplied With:.
Chuck safety guard.
Drill chuck & arbor.
Drill drift (on MT models)Specifications
Drilling Capacity (mm): 16mm (5/8″)
Spindle Taper: #2MT
Chuck: 3-16mm B16
Motor Power: 450W 240V
Spindle Travel (mm): 85
Speed: 16 Speed 180-2770
Swing (mm): 360
Table Size / Base Size (mm): 290×290 / 460×272
Column Diameter (mm): 72
T-Slot Size: 16mm
Height (mm): 1000
N.W. / G.W. (kg): 51 / 54Drill press vice to suit: VDP102 or VDP150
Cross slide vice to suit: TM130-100(0 reviews) -
Grinding MachinesITM Bench Grinder 240V, 370W, 150mm
Features
Powerful 370W induction motor.
25mm width grinding wheels with 36 & 60 grit for fast removal of material.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother operation.
Capacitor Start-Run motor for maximum performance.
Fully adjustable tool rests for ease of use and maximum user control.
Large eye shields for increased user safety.Specifications
Motor Power: 370W
Speed: 2980RPM
Wheel Size: 150mm x 25mm
Spindle Thread: M12 x 1.75mm
Weight: 11.1kg(0 reviews) -
Grinding MachinesITM Bench Grinder 240V, 600W, 200mm
Features
Powerful 600W Induction Motor.
25mm width grinding wheels with 36 and 60 grit for fast removal of material.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother running.
Capacitor Start-Run motor for maximum performance.
Heavy Duty tool rests for maximum user control.
Large eyes shields for increased user safety.Specifications
Motor Power: 600W
Speed: 2980RPM
Wheel Size: 200mm x 25mm
Spindle Thread: M16 x 2mm
Weight: 16.7kg(0 reviews) -
Grinding Machines
ITM Bench Grinder 240V, 900W, 250mm
Features
Powerful 900W induction motor.
25mm width grinding wheels with 36 & 60 grit for fast removal of material.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother operation.
Capacitor Start-Run motor for maximum performance.
Fully adjustable tool rests for ease of use and maximum user control.
Large eye shields for increased user safety.Specifications
Motor Power: 900W
Speed: 2980RPM
Wheel Size: 250mm x 25mm
Spindle Thread: M16 x 2mm
Weight: 32kg(0 reviews) -
Grinding MachinesITM Bench Grinder 415V, 3 Phase, 900W, 250mm
Features
- Powerful 900W induction motor
- 25mm width grinding wheels with 36 & 60 grit for fast removal of material
- Cast iron body and base for long lasting performance
- Vibration absorbing pads on base for smoother operation
- Capacitor Start-Run motor for maximum performance
- Fully adjustable tool rests for ease of use and maximum user control
- Large eye shields for increased user safet
Specifications
- Powerful 900W induction motor
- 25mm width grinding wheels with 36 & 60 grit for fast removal of material
- Cast iron body and base for long lasting performance
- Vibration absorbing pads on base for smoother operation
- Capacitor Start-Run motor for maximum performance
- Fully adjustable tool rests for ease of use and maximum user control
- Large eye shields for increased user safet
(0 reviews) -
Grinding MachinesITM Bench Grinder Stand
Features
Bench Grinder Stand for use with TM400-150, TM400-200, TM400-250, TM402-200Specifications
Height: 760mm
Weight: 11.5g(0 reviews) -
GeneralITM BM18 Portable Bevelling Machine
- Powerful electric motor
- Maximum 18mm bevel width (more than one pass may be required)
- Mill edges of plates and pipes made of steel, aluminium alloys, brass or plastic
- Bevel materials with minimum thickness of 1.5mm
- Continuous bevel width adjustment
- New more durable milling heads with hexagonal fixing
- Easy replacement of milling head
- Rounding inserts R2, R3, R4 or R5 available
- 4-sided indexable cutting inserts (sold separately)
Standard Set Includes:
- WA-BM18 bevelling machine without milling head
- Plastic box
- 32mm flat wrench
- Allen wrench hex s=6
- Does not include milling head
- Contact block
- 6mm hex wrench
- Operator’s manual
(0 reviews) -
GeneralITM BM18A Pneumatic Portable Beveller, Mac Bevel Width 18mm
Features
The BM-18A is a plate beveller with a powerful pneumatic motor. It enables machining up to 18 mm bevel. New hexagonal fixing of the milling head increases beveller durability and makes replacement of the head more convenient and user-friendly.Maximum 18 mm bevel width (more than one pass could be required)
New more durable milling heads with hexagonal fixing
Easy replacement of milling head
2-sided indexable cutting inserts for beveling remain the same as for BM-16
Rounding edges R2, R3, R4 or R5
4-sided indexable cutting inserts for rounding remain the same as for BM-7 and BM-16Standard Set Includes:
- BM-18 beveling machine without milling head or cutting inserts
- Plastic box
- Handle
- 32mm flat wrench
- Allen wrench hex s=6
Specifications
- Spindle speed (without load): 6000 rpm
- Bevel angle (depending on milling head in use): 22.5°, 30°, 37.5°, 45°, 50°, 55°, 60°
- Minimal diameter of countersinking: ca 40mm (1.57″)
- Rounding edges (option): R2, R3, R4, R5
- Minimal plate thickness: 2mm
- Air requirement: 6 bar (0,6MPa) (87 PSI)
- Air consumption: 1800 L/min , (64 CFM)
- Pneumatic drive: 2800 W
- Minimum required diameter of supply hose: 19 mm (3/4″)
- Weight (without milling head): 9.3kg
(0 reviews) -
GeneralITM BM20 Plus Bevelling Machine
The BM20 PLUS is a quality European made, portable, easy to use, heavy duty machine designed for bevelling steel plates & pipes prior to welding or edge finishing work. The bevelling machine is fitted with two milling heads each holding five carbide inserts allowing smooth operation and exceptional efficiency.
Milling cutter heads provide a smooth milled finish. End planing can be achieved with optional attachment.
Newly designed milling head arrangement which is fast and easy to set up(0 reviews) -
GeneralITM BM21 Plus Bevelling Machine
The BM21 is the latest generation portable bevelling machine, for machining plates and pipes prior to welding. This new and improved design offers a number of innovative solutions that increase ergonomics and ensure even more comfort and work safety of the operator. Also available is the BM21S Bevelling Machine, specifically designed for working with stainless steel.
New single milling head equipped with 10 indexable inserts that require no set up and makes the machining process far more efficient with little operator’s effort.
Extended working range from 0° to 60° with continuous angle adjustment.
Easy setting of chamfer angle and bevel width.
One universal guideline for bevelling both plates and pipes.
Bevels pipes 150 – 300mm diameter, optional attachment available for bevelling pipes 260 – 600mm diameter.
4 vibration isolators protect both the operator and electronics of the machine against harmful vibration(0 reviews) -
GeneralITM BM21S Beveller for Stainless Steel, 240V 1.6Kw Motor, 0-60 Degree Max Bevel Width 21mm
Features
The BM21S Bevelling Machine is specifically designed for working with stainless steel.The BM21 series is the latest generation portable bevelling machine, for machining plates and pipes prior to welding. This new and improved design offers a number of innovative solutions that increase ergonomics and ensure even more comfort and work safety of the operator.- New single milling head equipped with 10 indexable inserts that require no set up and makes the machining process far more efficient with little operator’s effort.
- Extended working range from 0° to 60° with continuous angle adjustment.
- Easy setting of chamfer angle and bevel width.
- One universal guideline for bevelling both plates and pipes.
- Bevels pipes 150 – 300mm diameter, optional attachment available for bevelling pipes 260 – 600mm diameter.
- 4 vibration isolators protect both the operator and electronics of the machine against harmful vibration.
- Unique BM21S features include a low speed (grey colour) motor, plus guide plate and guide rollers made of stainless steel.
Specifications
Induction Motor: 1600W
Grinding Angle: 0° – 60°
Speed: 1360rpm
Weight: 21kg(0 reviews) -
GeneralITM BM25 Portable Beveller for Stainless Steel, Max Bevel Width 25mm 240V Motor
Features
The WA-BM25S is an easy-to-use, portable heavy-duty machine designed to machine stainless steel. The beveller is equipped with a powerful motor and fitted with a face milling bevelling head, allowing smooth operation and exceptional efficiency. The WA-BM25S allows milling of straight edges with a bevel width up to 25mm, and the variable spindle speed makes it easy to optimise cutting conditions. It features a continuously adjustable bevel angle between 0 and 90 degrees and milling depth for full control of the milling process. The beveller is equipped with a roller guide, which makes it easy and light to operate. All components of the guide are made of stainless steel to protect against contamination. The WA-BM25S has a state-of-the-art electronic motor overload module protecting the operator, the machine and the tooling.- Contamination-free stainless steel processing
- Maximum 25 mm bevel width (more than one pass could be required)
- The continuously adjustable bevel angle between 0 and 90 degrees one milling head in use only
- Powerful motor with electronic speed control between 18005850 rpm to work with various materials
- A single head works with the face milling method, allowing less milling resistance and effort for the operator
- Overload protection to prevent motor damage
- 2 Year warranty
Specifications
- Voltage: 1~ 110-120 V, 50-60 Hz
- Voltage: 1~ 220-240 V, 50-60 Hz
- Power: 2200 W
- Spindle speed (without load): 1800-5850 rpm
- Maximum bevel width (b, Fig. 1): 25 mm (1″)
- Maximum depth of cut (d, Fig. 1): 12.5 mm (1/2″)
- Bevel angle (, Fig. 1): 0-90
- Bevel angle (recommended): 15-75
- Minimum workpiece thickness: 2 mm (0.08″)
- Weight: 12.5 kg (27 lb)
(0 reviews) -
GeneralITM BM25 Portable Bevelling Machine
The BM25 is an easy to use, portable heavy-duty machine designed for bevelling steel plates prior to welding. The beveller is equipped with powerful motor and fitted with face milling bevelling head, allowing smooth operation and exceptional efficiency.
BM25 enables milling straight edges up to 25mm bevel width, whereas variable spindle speed facilitates optimizing cutting conditions. Continuously adjustable milling depth and bevel angle between 0° and 90° require no tooling to change. BM25 has got a state-of-the-art electronic motor overload module protecting the operator, the machine and the tooling.
The beveller is equipped with guide rollers, which make it easy and light to operate.
- Comfort and ergonomics of work
- Continuously adjustable bevel angle between 0 and 90 degrees
- Single head operates with face milling method
- Maximum 25mm bevel width (more than one pass could be required)
- Continuous bevel width adjustment
- Powerful electric motor
- Milling head is equipped with 5 pcs of 2-sided indexable cutting inserts
- Electronic speed control between 1800-5850 rpm
- Overload protection
(0 reviews) -
GeneralITM BM7 Portable Beveller, 240V 1100W Motor, Max Bevel Width 7mm
Features
Small, lightweight, quick, and simple to use beveller that creates a perfect radius (R2, R3, R4 or R5) in just one pass, saving time and money over conventional grinding methods. Ideal for milling plates, pipes and contour profiles. Perfect solution for radius edge applying to steel sections before painting which has crucial implications on lifetime of material cover to prevent rust build up on sharp edges.
Functions:
- Top bevelling
- Arched edge bevelling
- Pipe OD bevelling
- Lightweight and compact design
- Ideal for radius edge bevelling
- Small overall dimensions
- Excellent for limited access
- Continuous bevel width adjustments
- One single 45 degrees milling head for both radius and V bevels
Specifications
Power supply: 1~220-240 V, 50-60 Hz
Motor: 1080 W
Spindle speed (without load): 6500 rpm
Maximum bevel width: 7 mm (0.28″)
Bevel angle (ß, depending on milling head): 45° ; 30° (option)
Minimal diameter of countersinking: ca 40 mm (1.57″)
Rounding edges: R2, R3, R4, R5
Min plate thickness: 5.0 mm
Pipe ID beveling: Min. ID 40mm
Dimensions: 327 mm (12.9″) L x 142 mm (5.6″) W x 319 (12.5″) H
Weight (without milling head): 6.1 kg (13 lbs)Standard set includes:
- BM-7 beveller including milling head 45° without inserts
- Plastic box
- Special wrench
- Torx T15 screwdriver
- Screw grease (5 g)
- Operator’s Manual
(0 reviews) -
Automotive Lifting & WorkshopITM Bottle Jack Air Hydraulic
ITM Air/Hydraulic bottle jacks are specifically designed for commercial use and can be operated either manually or pneumatically and comply with the Australian Mandatory Standard AS/NZS 2693:2007. A high quality aluminium air pump allows fast and efficient lift when in the workshop, the manual function allows for normal operation anywhere when air supply is not available making them perfect for onsite/offsite lifting of heavy duty machinery, farm equipment and industrial construction equipment. Constructed from heavy duty billet steel, these dual mode bottle jacks and ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. Fitted with polyurethane seals and a fully chromed and polished cylinder and piston, long life and reliable performance are guaranteed
- Twon style operation: Air and hydraulic (includes handle for hydraulic operation)
- Polyurethane seals – last up to 10 times longer than traditional rubber seals
- Billet steel base and welded construction for extra strength and durability
- Fully chromed and polished cylinder and piston
- 2 Speed action – slow down under load
- Complies with mandatory Australian standard: AS/NZS 2693:2007
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Automotive Lifting & WorkshopITM Bottle Jack Hydraulic
ITM bottle jacks are ideal for any home garage or professional workshop and are designed to comply with the Australian Mandatory Standard AS/NZS 2693:2007. Constructed from heavy duty billet steel, these lightweight jacks are ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. A fully chromed and polished bore and piston ensures a smooth and easy lift everytime and high performance seals provide leak-free, durable performance
- Fully welded design to eliminate leaks
- Billet steel base and welded construction for extra strength and durability
- Suited for use in the professional trade workshop
- Fully chromed and polished cylinder and piston
- Fitted with high performance seals
- Complies with mandatory Australian standard: AS/NZS 2693:2007
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Automotive Lifting & WorkshopITM Bottle Jack Squat Hydraulic
ITM bottle jacks are ideal for any home garage or professional workshop and are designed to comply with the Australian Mandatory Standard AS/NZS 2693:2007. Constructed from heavy duty billet steel, these lightweight jacks are ideal for lifting farm vehicles, heavy-duty machinery, industrial construction equipment and more. A fully chromed and polished bore and piston ensures a smooth and easy lift everytime and high performance seals provide leak-free, durable performance
- Fully welded design to eliminate leaks
- Billet steel base and welded construction for extra strength and durability
- Suited for use in the professional trade workshop
- Fully chromed and polished cylinder and piston
- Fitted with high performance seals
- Complies with mandatory Australian standard: AS/NZS 2693:2007
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
-
Grinding MachinesITM Buffer Machine 240V, 550W, 200mm
Features
Powerful 550W Induction Motor.
Safety lock On/Off switch.
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother running.
Capacitor Start-Stop motor for maximum performance.
Includes 200mm x 14mm stitched polishing mops.Specifications
Motor Power: 550W
Speed: 2850RPM
Wheel Size: 200mm x 14mm
Spindle Thread: M16 x 2mm
Weight: 11.5kg(0 reviews) -
Cast Iron ClampsITM Cast Iron C Clamp
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Cast Iron ClampsITM Cast Iron F Clamp
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Machine Tool AccessoriesITM Cast Iron Vee Block Pairs
Made from close grained cast iron, these blocks are precisely ground and machined square and parallel.
The Vee’s are 90° centred in true.
The blocks are manufactured and supplied in numbered pairs and come in handy for holding large jobs where clamping is not necessary.
Squareness and Parallelism of Vee Grooves with respect to base – Within 0.0012″ (30 microns)(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
VicesITM Chain Pipe Vice
Superb chain pipe vice with hardened steel jaws & close grained cast iron body.
Offers excellent grip for irregular shapes due to flexibility of the chain.
Can be rapidly tightened to provide a very strong grip on the pipe.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Sash ClampsITM CHST/25-25 Groz Clamp Cramp Head Set
Features
Cramp heads are a low cost alternative to the full size T Bar and Sash Bar Cramps. A bar cramp of any length can be made by using a piece of timber 25mm(1″) thick. The timber is drilled with holes producing a light duty bar cramp as strong and as true as the timber chosen. The heads are made from malleable iron, the handle screw and pin from high quality steel for hard wearing long life. Blackened screw has rolled Acme threads for extra strength and resistance to wear.Specifications
Code: CHST/25-25(0 reviews)
