Shop

The AFP12-40LP is a premium quality 12 volt diesel transfer pump only model designed and tested for optimum performance and reliability in the harsh Australian environment. It is a perfect and economical alternative to  manual pumps. The AFP12A-40LP has a flowrate of 40 ltr/ min (free flow) and has a 30 minute duty cycle. The Macnaught range of electric diesel pumps are ideal for quick reliable transfer of Diesel and Kerosene from bulk fuel tanks, service trucks, utes, 205ltr drums and IBC(intermediate bulk containers)

The 240V Diesel Mini Bowser offers a new pump to satisfy operators looking for a robust unit that effectively delivers high volume diesel. This compact unit comes as a complete package that allows refuelling at flow rates up to 100LPM. Equipped with an easy to use, accurate mechanical meter that can be calibrated on-site, this unit also has a smart on/off switch integrated into the nozzle holder. Extremely versatile, the bowser can be installed directly onto a wall or to an existing structure.

• Suitable for Diesel use only
• Flow rate up to 100LPM
• Inlet/Outlet: 1″ BSP(F)
• 30 minute duty cycle
• Built-in nozzle holder with on/off switch
• IP55 protection
• 240V pump with meter
• 4-digit reset total
• 8-digit accumulative total
• 6m x 1″ delivery hose with automatic nozzle
• 1″ x 2m suction hose

Air Operated Pump Kit designed to dispense directly from 205L drums or tanks.

• This kit allows direct dispensing from drum (205L/54 gal drum)
• Suitable for oils and fluids up to SAE 140 viscosity
• Delivery output up to 14LPM viscosity dependant
• Air inlet: 1/4″ BSP(F)
• Fluid outlet: 1/2″ BSP(F)
• Kit supplied with 3:1 ratio pump with bung adaptor, 3m x 12.5mm delivery hose, metered oil control gun with fitted rigid extension with non-drip nozzle and drum bung wrench (Aluminium 2″- 3/4″)
• Outlet Hose Length – 3m (10’ft) x 12.5mm 1/2″
• Note: Air lubricator supplied

The BOP 20 litre universal stem starter kit includes the Power Head, rechargeable 18V 2Ah Lithium-ion battery, 1 hour fast charger, 1.5m dispensing hose with gun, common bung adaptors and a 20 litre stem suitable for engine oil, gear oil, hydraulic oil (oils up to SAE140 viscosity), automatic transmission fluid (ATF) and engine coolant.

• Suitable for engine oil, gear oil, hydraulic oil (oils up to SAE140 viscosity), automatic transmission fluid (ATF) and engine coolant
• 18V rechargeable 2.0Ah lithium-ion battery
• 1 hour fast charge
• Up to 105 litres per charge
• Drum size – nominal 15-25 litre
• 1.5 metre reinforced transparent dispensing hose
• Lubricating Oils – Flow rate up to 3.5 L/Min (SAE40 at 20OC)
• Heavy Oils – Flow rate up to 2 L/Min (SAE140 at 20OC)
• Automatic Transmission Fluid (ATF) – Flow rate up to 4.5 L/Min
• Coolant – Flow rate up to 5.8 L/Min

The Chemical Rotary Pump is made from Polyproplene with Ryton Rotors and has Polypropylene spout, delivery hose and moulded nozzle.

• 1″ BSP (F) inlet
• 30mm o.d. spout
• up to 120 LPM flow rate, depending on installation
• No spare parts available

The K29 FLEXIGUN® is a classic grease gun that incorporates a unique variable stroke piston and valve arrangement for true one handed operation. The push in handle is easy to use and requires much less effort to operate. Increased pressure can be produced by short strokes (low volume) or high volume using a long stroke (low pressure). Heavy duty pistol grip construction with comfortable ergonomics to suit 450g grease cartridges, bulk filling or Macnaught J3 grease transfer pump loading. The K29 is fully repairable with a strong die cast head and heavy gauge steel barrel for extra long service life.

AGRICULTURAL KIT 110pce

• Head profile as per SAE J534/DIN 71412* (*for metric fittings only)
• Heat Treated greasing end
• Zinc plating exceeds ASTM B117
• Fittings with ball check use heat treated springs for increased life

METRIC Kit 80pce. Suited for a more modern fleet where European or Japanese sourced equipment is found.

• 20 only M6 x 1 – Tapered – Straight
• 10 only M6 x 1 – Tapered – 90°
• 15 only M8 x 1 – Tapered – Straight
• 10 only M8 x 1 – Tapered – 90°
• 15 only M10 x 1 – Tapered – Straight
• 10 only M10 x 1 – Tapered – 90°

Oil dispensing kit using the OILMASTER pump that can be attached to an IBC or bulk tank.

• Sturdy mounting plate for pump & reel, pre-drilled
• OLP100 RETRACTA oil reel – 10m hose
• T312-01 air-operated oil pump
• All necessary fittings and hoses
• No Gun

Macnaught’s patented release mechanism delivers enhanced safety and is both easier and faster to use. The KY+ (NPT Thread) retains the benefit of the original floating jaw design, providing a strong, leak-free connection while improving safety & usability through:

• Internal pressure relief that reduces the risk of high pressure grease release
• Quick & easy release mechanism enabling one handed operation – Load & Lube!

The K45 LEVERGUN® is a lever-action grease gun designed for high pressure/high volume greasing and can easily clear blocked or damaged grease nipples. The K45 LEVERGUN® features a durable die cast aluminium head, a heavy gauge steel barrel and a heavy duty follower assembly to handle a wide range of grease viscosities up to NLGI No 2. Comes complete with 150mm (6″) rigid high pressure extension and KY SUPERGRIP™ coupler. Suits 450g grease cartridges, bulk filling or Macnaught J3 transfer pump loading.

The POWERLUBE™ is a premium quality, reliable, 50:1 air-operated pneumatic greasing system that is excellent for high volume grease users that have many applications and require continuous high pressure greasing. This portable grease dispensing system is suitable for 20kg pails and is equipped with a low air consumption motor that doesn’t need to be lubricated due to the use of modern polymer materials. Users will save on power and the oily mist and mess associated with air operated equipment is gone. Suitable for underground coal mine applications.

The P8-11 POWERLUBE™ is a premium quality, reliable, 50:1 air-operated greasing system that is excellent for high volume grease users that have many applications and require continuous high pressure greasing. The P8-11 is suitable for 180kg pails and is equipped with a low air consumption motor that doesn’t need to be lubricated due to the use of modern polymer materials. Users will save on power and the oily mist and mess associated with air operated equipment is gone. Suitable for underground coal mine applications.