Shop
Showing 14869–14904 of 15665 results
-
Other Diagnostic ToolsVOLT SAFETY Aluminised Furnace Trousers – Elliotts
Elliotts Aluminised Furnace Trousers feature 50mm adjustable braces and side adjusters for a firmer fit. The T-Gard P190 Thermal Liner has been specifically designed for Furnace PPE. This design is a generous fit and provides the wearer with 360 degrees of protection.
Key Features:
- Sizes Available: S, M, L, XL, 2XL, 3XL, 4XL
- Material: Aluminised Carbon / Aramid + T-Gard P190 – 770 gsm
- Full-fitting trousers
- Designed to be worn over work trousers (secondary protective clothing)
- 50mm adjustable braces
- Side adjusters for a firmer fit
- Lined with T-Gard P190 Thermal Liner
- Sewn with heat-resistant aramid thread for extra durability
- Suitable for Foundry and Furnace work
Standards:
- ISO 11612
(0 reviews) -
MetersVOLT SAFETY Analog Earth Tester FT3151 – Hioki
Earthing or grounding electrical equipment is crucial for ensuring safety, protecting lives, and preventing damage to machinery. The FT3151 Analog Earth Tester employs an AC phase differential system to measure earthing resistance, guaranteeing precise readings that are not influenced by earth voltage or auxiliary earthing resistance. Additionally, its new, innovative cord winders make cleanup effortless.
Key features
- Dimensions: 164mm x 119mm x 88mm
- Weight: 760g
- Includes:
- Auxiliary Earthing Rod L9840 (2 piece set)
- Measuring cable L9841 (alligator clip, black 4 m (13.12 ft))
- Measurement Cable L9842-11 (yellow 10 m (32.81 ft), equipped with winder)
- Measurement Cable L9842-22 (red 20 m (65.62 ft), equipped with winder)
- LR6 (AA) Alkaline battery ×6
- Carrying Case C0106
- Instruction manual
- Supports Three-electrode and Two-electrode method (Simple Measurement)
- Wide measurement range from 0 to 1150 Ω, based on EN standard
- Switchable measurement frequency to reduce the effects of power supply harmonics
- Dramatically faster setup that comes with improved grounding rods and cord winders
Standards:
- EN 61010
- EN 61557
- CAT II 300V
(0 reviews) -
Gas DetectorsVOLT SAFETY BW Max XT II Gas Detector – Honeywell
Honeywell’s BW Max XT II Gas Detector is a smart, simple and economical way to ensure compliance.
Key Features:
- Dimensions: 131mm x 70mm x 52 mm
- Weight: 328g
- Alarms: Visual, vibrating, audible
- Detects and measures H2S (Hydrogen Sulfide), CO (Carbon Monoxide), O2 (Oxygen) and LEL (Combustible Gases)
- H2S: 0-200ppm
- CO: 0-1000ppm
- O2: 0-30% vol.
- LEL: 0-100%
- Continuous LCD shows real-time gas concentrations
- Rated to work in extreme environments from -20C to 50C
- 8 – 13 hour battery run time
- 375 hours of datalogging at 15 second intervals
- One button operation with robust, motorised pump
- Compact and lightweight design makes the detector comfortable to wear
- Built-in concussion proof boot
- Compatible with MicroDock II
Standards:
- IP66
- UL Classified Class I, Div. 1, Gr. A, B, C, D
- ATEX: CE, Ex II 1 G Ga Ex ia IIC T4
(0 reviews) -
Gas DetectorsVOLT SAFETY BW MicroClip XL Gas Detector – Honeywell
Honeywell’s BW Microclip XL Gas Detector is the world’s most popular multi-gas portable detector, delivering long runtime and reliability — plus small size, low cost and the easiest user experience.
Key Features:
- Dimensions: 113mm x 60mm x 32 mm
- Weight: 190g
- Alarms: Visual, vibrating, audible
- Detects and measures H2S (Hydrogen Sulfide), CO (Carbon Monoxide), O2 (Oxygen) and LEL (Combustible Gases)
- H2S: 0-100ppm
- CO: 0-500ppm
- O2: 0-30% vol.
- LEL: 0-100%
- Continuous LCD shows real-time gas concentrations
- Rated to work in extreme environments from -20C to 50C
- 18 hour typical battery run time
- One button operation with robust, motorised pump
- Compact and lightweight design makes the detector comfortable to wear
Standards:
- IP68
- ANSI/UL – 913 and ANSI/ISA – 12.13.01 Part 1
- ATEX: CE 0539 g II 1G Ex da ia IIC T4 Ga DEKRA 19ATEX0025 EN 60079-0, EN 60079-1, EN 60079-11, EN 60079-26
(0 reviews) -
Gas DetectorsVOLT SAFETY BW Solo Gas Detector – Honeywell
Honeywell BW Solo Gas Detector is a smart, simple and economical way to measure gases.
Key Features:
- Dimensions: 70mm x 67mm x 36mm
- Weight: 116g
- Alarms: Visual, vibrating, audible
- Detects and measures Oxygen (O2)
- O2: 0-30% v/v
- P&A is available for other models on request
- O2: 0-30% v/v
- Sensor can be replaced in the field to detect required gases
- Continuous LCD shows real-time gas concentrations
- Gas Detector designed to work from -40C to 60C.
- Sensors have different operating ranges. Refer to sensor specifications.
- Typical battery life of 12 months, 6 months for O2
- Six months of datalogging at 5 second intervals
- Compact and lightweight design makes the detector comfortable to wear
- Built-in concussion proof housing
Standards:
- IP66
- UL Classified Class I, Div. 1, Gr. A, B, C, D
- ATEX: : Sira 18ATEX2243 CE 2460 EX II 1G Ex ia IIC T4 Ga
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter AC Tester 3280-10F – Hioki
Hioki’s 3280-10F AC Tester is a versatile clamp meter designed for accurate and reliable electrical measurements, 1000A AC current and 600V AC/DC voltage. This clamp meter is ideal for electrical maintenance, industrial equipment, residential wiring and field work. It is useful for troubleshooting and maintaining electrical systems and measuring electrical current.
Key Features:
- Operating Temperature: -25C – 65C
- Weight: 100g
- Dimensions: 57mm x 175 mm x 16mm
- Includes:
- CR2032 Coin-Shaped lithium battery
- 9398 Carrying Case
- L9208 Test Lead
- Instruction manual
- Power Supply: 1x CR2032 Coin-Shaped lithium battery. continuous use 120 hours
- IP40 dustproof and waterproof (while in storage)
- 1000A AC current measurements to ±1.5%rdg ±5dgt accuracy
- 600V AC/DC voltage measurements to ±1.0%rdg ±3dgt accuracy
- True RMS AC measurements
- Digital backlit display
- CAT IV 300V (Current) / CAT III 600V (Current) / CAT III 300V (Voltage)
Standards:
- CAT IV 300 V (Current)
- CAT III 600 V (Current)
- CAT III 300 V (Voltage)
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter AC/DC 1000V CAT IV – HT Italia
The HT Italia HT9021 professional clamp meter is designed for DC/AC TRMS current measurement up to 1000A, and DC/AC voltage for achieve safety CAT IV 1000V. The Autopower OFF feature is also available for the meter in order to preserve it’s internal battery charge. This clamp meter is ideal for electrical maintenance, industrial equipment, residential wiring and field work. It is useful for troubleshooting and maintaining electrical systems and measuring electrical current.
Key Features:
- Operating Temperature: 0°C – 40°C (32°F – 104°F)
- Weight: 442g (including batteries)
- Dimensions: 252mm x 88mm x 44mm
- Includes:
- 1 x 9V NEDA 1604 IEC 6F22 JIS 006P battery
- Carrying Case
- KIT4413-2 Test leads
- Instruction manual
- Power Supply: 1x 9V battery that lasts up to 200 Hours
- 1000A AC voltage measurement
- 1000V AC/DC voltage measurements
- True RMS AC measurements
- Digital backlit display
- Auto Power Off
- CAT IV 600V / CAT III 1000V
Standards:
- CAT IV 600V
- CAT III 1000V
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter AC/DC Tester 3280-70F – Hioki
Hioki’s Digital Clamp on Hi-Tester 3280-10F AC/DC with Flexible CT6280 Sensor come together to make the 3280-70F clamp meter set, capable of measuring up to 4200A AC.
Hioki’s 3280-10F AC/DC Tester is a versatile clamp meter designed for accurate and reliable electrical measurements, 1000A AC/DC current and 600V AC/DC voltage. This clamp meter is ideal for electrical maintenance, industrial equipment, residential wiring and field work. It is useful for troubleshooting and maintaining electrical systems and measuring electrical current.
The CT6280 Sensor has a large-diameter loop and is ideal for measuring large wires and pairs of wires in small spaces. The sensor is freely bendable and the cable is 800mm in length.
Key Features:
- Operating Temperature: -25C – 65C
- Weight: 100g
- Dimensions: 57mm x 175 mm x 16mm
- Includes:
- CT6280 Sensor
- Dimensions: 42mm x 65mm x 18mm (excluding the flexible loop and output cable)
- Weight: 71g
- Cable length – 800mm
- Measures up to 4200A AC ±3.0%rdg ±5dgt accuracy
- CR2032 Coin-Shaped lithium battery
- 9398 Carrying Case
- L9208 Test Lead
- Instruction manual
- CT6280 Sensor
- Power Supply: 1x CR2032 Coin-Shaped lithium battery
- IP40 dustproof and waterproof (while in storage)
- 1000A AC/DC current measurements to ±1.5%rdg ±5dgt accuracy
- 600V AC/DC voltage measurements to ±1.0%rdg ±3dgt accuracy
- True RMS AC measurements
- Digital backlit display
- CAT IV 300V (Current) / CAT III 600V (Current) / CAT III 300V (Voltage)
Standards:
- CAT IV 300 V (Current)
- CAT III 600 V (Current)
- CAT III 300 V (Voltage)
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter AC/DC Tester 3288-20 – Hioki
Hioki’s 3288-20 AC/DC Tester is a versatile clamp meter designed for accurate and reliable electrical measurements, 1000A AC/DC current and 600V AC/DC voltage. This clamp meter is ideal for electrical maintenance, industrial equipment, residential wiring and field work. It is useful for troubleshooting and maintaining electrical systems and measuring electrical current.
Key Features:
- Operating Temperature: 0C – 40C (32F – 104F)
- Weight: 105g
- Dimensions: 57mm x 180 mm x 16mm
- Includes:
- CR2032 Coin-Shaped lithium battery
- 9398 Carrying Case
- L9208 Test Lead
- Instruction manual
- Power Supply: 1x CR2032 Coin-Shaped lithium battery that lasts 35 Hours
- 1000A AC/DC current measurements to ±1.5%rdg ±5dgt accuracy
- 600V AC/DC voltage measurements to ±1.3%rdg ±4dgt accuracy
- True RMS AC measurements
- Digital backlit display
- CAT III 600V / CAT III 300V / CAT II 600V
Standards:
- CAT III 600V Current
- CAT III 300V Voltage
- CAT II 600V Voltage
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter AC/DC Tester CM4371-50 – Hioki
Hioki’s CM4371-50 model is a 600 A True RMS clamp meter designed with robust jaws and an IP54-rated dustproof and waterproof enclosure, allowing professionals to work efficiently in demanding environments. This includes tasks such as developing, repairing, and maintaining equipment like electric vehicles.
Key Features:
- Operating Temperature: -40C – 400C
- Weight: 340g
- Dimensions: 65mm x 215mm x 35mm
- Jaw Diameter: φ33 mm (1.30 in)
- AC measurement system: True RMS
- Includes:
- LR03 Alkaline battery ×2
- C0203 Carrying Case
- L9300 Test Lead
- Instruction manual x2
- Operating Precautions
- Power Supply: LR03 Alkaline battery ×2, continuous use 40hours
- DC Current Range: 20.00 A/600.0 A, Basic accuracy: ±1.3% rdg. ±0.08 A (20 A range)
- AC Current Range: 20.00 A/600.0 A (10 Hz to 1 kHz, True RMS), Basic accuracy: 45-66 Hz: ±1.3% rdg. ±0.08 A (at 20 A)
- DC Voltage Range: 600.0 ｍV to 1000 V
- AC Voltage Range: 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 – 66 Hz: ±0.9% rdg. ±0.003 V (at 6 V)
- IP54 dustproof and waterproof (while in storage)
- Digital backlit display
- CAT IV 600V / CAT III 1000V
Standards:
- CAT IV 600 V
- CAT III 1000 V
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter Carry Case – Hioki
Secure your equipment with the Hioki C0203 Carrying Case for Clamp-On AC/DC Meters. Hioki’s Clamp Meter Carry Case’s robust design will keep your equipment protected, so you can bring it with you wherever you need it. Plus, by storing your tool in this reliable case, you are maximizing its longevity and efficiency.
Key Features
- Designed for Hioki Clamp-On AC/DC Meters
- Robust design for everyday travel and storage
- Maximizes the operating life of your equipment
(0 reviews) -
Clamp MetersVOLT SAFETY Clamp Meter with Power Function MD 9273 – Metrel
Metrel’s MD 9273 TRMS Clamp Meter with Power Function is a versatile and accurate tool for measuring electrical parameters. With Bluetooth connectivity to other Metrel products (MI 3155, MI 3152, and MI 3325), it allows for seamless integration and remote data monitoring. The Clamp Meter with Power Function features a 28mm jaw size, a shielded design for use in noisy environments, and precise measurements of AC current and voltage. Advanced functions include a 128Hz notch filter for cable tracing, intelligent loss analysis, and peak value display.
Key Features:
- Includes:
- MD 9273 Bluetooth TRMS Leakage Clamp with Power Functions
- Test lead with probe, 2 pieces
- AMD 9028 Alligator clip, 2 pieces
- 1.5V battery, type AA, 2 pieces
- Pouch
- Instruction manual
- Manufacturer Calibration certificate
- Meter Dimensions: 185mm x 62mm x 42mm
- Meter Weight: 210g
- Jaw size: 28mm
- MAX/MIN/HOLD mode: displays maximum, minimum or last measured value
- 128 Hz notch filter for cable tracing
- TRMS for accurate measurements on sinusoidal and non-sinusoidal signals
- Shielded jaw allows the clamp meter to be used in the noisiest environments
- Accurate readings of AC current with an accuracy of 0.8% and a base resolution of 0.01mA and voltage with an accuracy of 0.5% and a base resolution of 0.01V
- Measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement)
- Complex algorithms detect loss and allow determining possible reasons for current loss
- Measures current or voltage harmonic components and a percentage value of a harmonic up to the 19th
- Dual display allows readings to be displayed along with Total Harmonic Distortion (THD) or Power Factor (PF)
- The peak value of the waveform or crest factor can be displayed
- Bluetooth connection to other Metrel products MI 3155, MI 3152 and MI 3325
- Inrush current recording with other Metrel products MI 3155, MI 3152 and MI 3325
Standards:
- CAT III 600V
- CAT IV 300V
- IEC/EN 61010-031
- IEC/EN 61010-2-030
- IEC/EN 61010-2-032
- IEC/EN 61010-2-033
(0 reviews) - Includes:
-
Other Diagnostic ToolsVOLT SAFETY Class 2 Insulated Sleeves – Novax
Novax’s Rubber Class 2 Insulated Sleeves are manufactured to meet and exceed the EN 60984 standards, which are the internationally recognised standards of Rubber Insulating Sleeves. Manufactured using the environmentally friendly aqueous process, these dipped sleeves provide extra protection from the cuff of the Rubber Insulating Glove up to the shoulder of the user and serves as additional protection from accidental contact with energised equipment.
Key Features:
- Sizes Available: Small, Regular, Large, XL
- AC Maximum Use Voltage: 17kV
- DC Maximum Use Voltage: 25.5kV
- Colour: Yellow Over Red
- Includes straps and 4 buttons
- Curved elbow style
Standards:
- EN 60984
- IEC 60984
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Class 3 Insulated Sleeves – Novax
Novax’s Rubber Class 3 Insulated Sleeves are manufactured to meet and exceed the EN 60984 standards, which are the internationally recognised standards of Rubber Insulating Sleeves. Manufactured using the environmentally friendly aqueous process, these dipped sleeves provide extra protection from the cuff of the Rubber Insulating Glove up to the shoulder of the user and serves as additional protection from accidental contact with energised equipment.
Key Features:
- Sizes Available: Small, Regular, Large, XL
- AC Maximum Use Voltage: 26.5kV
- DC Maximum Use Voltage: 39.75kV
- Colour: Yellow Over Red
- Includes straps and 4 buttons
- Curved elbow style
Standards:
- EN 60984
- IEC 60984
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Class 4 Insulated Sleeves – Novax
Novax’s Rubber Class 4 Insulated Sleeves are manufactured to meet and exceed the EN 60984 standards, which are the internationally recognised standards of Rubber Insulating Sleeves. Manufactured using the environmentally friendly aqueous process, these dipped sleeves provide extra protection from the cuff of the Rubber Insulating Glove up to the shoulder of the user and serves as additional protection from accidental contact with energised equipment.
Key Features:
- Sizes Available: Small, Regular, Large, XL
- AC Maximum Use Voltage: 36kV
- DC Maximum Use Voltage: 54kV
- Colour: Yellow Over Red
- Includes straps and 4 buttons
- Curved elbow style
Standards:
- EN 60984
- IEC 60984
(0 reviews) -
MultimetersVOLT SAFETY Digital Multimeter DT4252 – Hioki
Hioki’s DT4252 Digital Multimeter offers robust performance with a broad temperature range (-10°C – 50°C) and precise measurements. It weighs 390g and measures 84mm x 174mm x 52mm. The device includes 4 LR03 alkaline batteries, providing up to 130 hours of use. It supports 1000A AC/DC current and 600V AC/DC voltage measurements with high accuracy. It features a digital display and complies with CAT IV 600V and CAT III 1000V safety standards. The DT4252 is a digital multimeter designed specifically for general purpose testing.
Key features
- Operating Temperature: -10°C – 50°C
- Weight: 390g
- Dimensions: 84mm x 174mm x 52mm
- Includes:
- 4x LR03 alkaline battery
- Holster
- L9207-10 Test Lead
- Instruction manual
- Power Supply: 4x LR03 alkaline battery that lasts up to 130 Hours
- 1000A AC/DC current measurements to ±0.3%rdg ±5dgt accuracy
- 600V AC/DC voltage measurements to ±0.9%rdg ±5dgt accuracy
- Digital Display
- Designed specifically for general purpose testing
- CAT IV 600V / CAT III 1000V
Standards:
- CAT IV 600V
- CAT III 1000V
(0 reviews) -
MultimetersVOLT SAFETY Digital Multimeter DT4256 – Hioki
Hioki’s Digital Multimeter offers robust performance with a broad temperature range (-25°C to 65°C) and precise measurements. It weighs 390g and measures 84mm x 174mm x 52mm. The device includes 4 LR03 alkaline batteries, providing up to 130 hours of use. It supports 1000A AC/DC current and 600V AC/DC voltage measurements with high accuracy. It features a digital display and complies with CAT IV 600V and CAT III 1000V safety standards.
Key features
- Operating Temperature: -25°C – 65°C (-13°F – 149°F)
- Weight: 390g
- Dimensions: 84mm x 174mm x 52mm
- Includes:
- 4x LR03 alkaline battery
- Holster
- L9207-10 Test Lead
- Instruction manual
- Power Supply: 4x LR03 alkaline battery that lasts up to 130 Hours
- 1000A AC/DC current measurements to ±0.3%rdg ±3dgt accuracy
- 600V AC/DC voltage measurements to ±0.9%rdg ±3dgt accuracy
- Digital Display
- CAT IV 600V / CAT III 1000V
Standards:
- CAT IV 600V
- CAT III 1000V
(0 reviews) -
MultimetersVOLT SAFETY Digital Multimeter DT4261 – Hioki
Hioki’s DT4261 Digital Multimeter offers robust performance with a broad temperature range (-25°C – 65°C) and precise measurements. It weighs 480g and measures 87mm x 185mm x 47mm. It supports 1000A AC/DC current and 600V AC/DC voltage measurements with high accuracy. It features a digital display and complies with CAT IV 600V and CAT III 1000V safety standards.
Key features
- Operating Temperature: -25°C – 65°C
- Weight: 480g
- Dimensions: 87mm x 185mm x 47mm
- DC voltage range: 600 mV to 1000 V
- AC voltage range: 6 V to 1000 V
- Includes:
- LR6 (AA) alkaline battery × 3
- L9300 Test Lead
- Instruction manual
- Operating Precautions
- True RMS multimeter
- Measure a wide variety of parameters such as AC/DC voltage, AC/DC current, frequency, capacitance, diode, resistance and continuity
- Drop proof up to 1 meter
- IP54 environmental protection
- CAT IV 600V / CAT III 1000V
Standards:
- CAT IV 600V
- CAT III 1000V
(0 reviews) -
MetersVOLT SAFETY Digital Phase Sequence Meter HT82 – HT Italia
HT Italia Digital Phase Sequence Meter HT82 model is a digital portable meter to perform the phase sequence indication measurement by connecting the standard test leads on L1, L2 and L3 phases of a generic three phase system. The meter shows the “R” indication in positive test and “L” indication in the opposite case. An acknowledgement of wrong cable connection it’s also detectable by meter.
Key Features:
- Includes:
- 3 Test Cables and 3 alligator clips
- Carrying case
- User manual
- AC voltage functional range from 40V to 690V
- Frequency functional range from 15Hz to 400Hz
- ‘R’ and ‘L’ indication at display
- Detectable of wrong connection
- LCD custom display
- Protection holster
Standards:
- CAT III 600V
(0 reviews) - Includes:
-
Electrical TestersVOLT SAFETY Digital RCD Tester 5406A – Kyoritsu
The Kyoritsu Digital RCD Tester is an essential tool for electricians and safety professionals, designed to efficiently test residual current devices (RCDs) for functionality and reliability. This compact and user-friendly tester features a clear digital display that provides accurate readings of trip times and current ratings, ensuring compliance with safety standards. With multiple test current settings, including 30mA, 100mA, and 300mA, it allows for versatile applications across various electrical systems. The tester’s robust design is built to withstand the rigors of daily use, while its intuitive interface makes it easy to operate, even in challenging environments. Whether conducting routine maintenance or troubleshooting, the Kyoritsu Digital RCD Tester delivers precise results, promoting electrical safety and performance.
Key Features:
- Dimensions: 167mm x 186mm x 89mm
- Weight: 800g
- Rated Tripping Current: 10/20/30/200/300/500mA
- Trip Current Duration: 1000ms, 200ms (×5)
- Includes:
- 7123 Australian Plug Test Lead
- 9121 Shoulder Strap
- 9147 Cord Case
- Instruction manual
- 3 LEDs for checking correct wiring status.
- 0 and 180 degree phase angle switch permits quick tests and consistent readings.
- Digital read-out of tripping time.
- Test of a large kind of RCDs, Standard, Selective, AC and A(DC sensitive breakers).
- Constant current source circuitry ensures that a fluctuating mains voltage does not affect the accuracy of readings.
- Large custom digital display readout.
- Visual indication of reversed phase and neutral wiring at socket.
Standards:
- CAT III 300V
- IEC 61557-1,-6
- IEC 61010-2-031
- IEC 60529 (IP54)
(0 reviews) -
MultimetersVOLT SAFETY DM66 Multimeter – Flir
The Flir DM66 digital multimeter is ideal for electricians. The DM66 can measure frequency, capacitance, voltage, current, resistance and more!
Key Features:
- Operating Temperature: -10C – 50C
- Measures ACV, DCV, Resistance, Continuity, Capacitance, Diode, DCA, ACA, Temperature, line Frequency, non-contact Voltage (NCV)
- 6000 Count (3-5/6 digits) backlit LCD with 5 reading per second update rate
- Auto Power OFF
- True RMS responding
- Auto AC/DC detection for voltage measurements
- LoZ (low impedance) for ghost voltage protection
- Auto ranging
- VFD feature (low pass filter for AC voltage measurements)
- MIN-MAX-AVG Reading Memory
- Relative Zero mode
- Drop proof to 2m
Standards:
- IP40 (Excluding terminals)
- CAT IV 300V
- CAT III 600V
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Electrical Insulated Glove Kit Class 0 1000V
Volt Safety Electrical Insulated Glove Kit Class 0 1000V is ideal for anyone working within the electrical industry. We all know when you are working with electricity there are occupational hazards, primarily Electric Shock and Arc Flash. These kits come complete with everything you need to protect yourself with, use, store and maintain your gloves. They of course come complete with a current test report.
Insulated gloves offer personal protection against electrical shocks when working on or near electrical equipment. They come in different classes and sizes to accommodate for every individual, task and scenario.
Key Features:
- Class 0 1000V Insulated Gloves
- Class: Class 0
- Maximum Use Voltage AC: 1000V AC Voltage
- Maximum Use Voltage DC: 1500V DC Voltage
- Length & Sizes Available:
- 280mm: 08, 09, 10, 11
- 360mm: 07, 08, 08.5, 09, 09.5, 10, 10.5, 11, 12
- Thickness: <1.0mm
- Cuff: Rolled Edge
- Colour: Red
- Ergonomic design for greater comfort
- Manufactured with premium latex rubber for durability and flexibility
- Outer Gloves
- Material: Goat Skin
- Length: 230mm
- Cuff: Velcro Tightening
- Colour: Natural
- Provides mechanical protection from abrasions, cuts, tears and perforations to your gloves
- Inner Gloves
- Material: Cotton
- Length: 280mm
- Colour: Cotton White
- Quantity: 5 pairs
- Designed for superior fit, comfort and sweat absorption
- Can be laundered and used repeatedly
- 3 Compartment Glove Bag
- Material: Canvas
- Holds and protects your kit contents
- Talcum
- Colour: White
- Fragrance: Unscented
- Size: 100g
- Aids easy donning of insulating gloves
- Relieves and prevents excessive perspiration
Standards:
- IEC 60903 – Insulated Gloves
- AS/NZS IEC 60903:2020 – Insulated Gloves
- AS 60903:2022* – Insulated Gloves
- HRC2 >10cal/cm2
- NFPA 70E
*Type tested and complies to standard
Kit Contents:
-
- Class 0 Gloves:
- 280mm – SKU: GLOVE0 280
- 360mm – SKU: GLOVE0
- Outer Gloves – SKU: GLOVEOUTER
- 5 x Pair of Deluxe Inner Gloves – SKU: GLOVEINNERD
- Glove Bag – SKU: BAG-GLOVE3
- Talcum – SKU: GLOVETALC
- Class 0 Gloves:
(0 reviews) - Class 0 1000V Insulated Gloves
-
Other Diagnostic ToolsVOLT SAFETY Electrical Insulated Glove Kit Class 00 500V
Volt Safety Electrical Insulated Glove Kit – Class 00 500V is ideal for anyone working within the electrical industry. We all know when you are working with electricity there are occupational hazards, primarily Electric Shock and Arc Flash. These kits come complete with everything you need to protect yourself with, use, store and maintain your gloves. They of course come complete with a current test report.
Insulated gloves offer personal protection against electrical shocks when working on or near electrical equipment. They come in different classes and sizes to accommodate for every individual, task and scenario.
Key Features:
- Class 00 500V Insulated Gloves
- Class: Class 00
- Maximum Use Voltage AC: 500V AC Voltage
- Maximum Use Voltage DC: 750V DC Voltage
- Sizes: 07, 08, 09, 09.5, 10, 10.5, 11, 12
- Length: 280mm
- Thickness: <0.5mm
- Cuff: Rolled Edge
- Colour: Red
- Ergonomic design for greater comfort
- Manufactured with premium latex rubber for durability and flexibility
- Outer Gloves
- Material: Goat Skin
- Length: 230mm
- Cuff: Velcro Tightening
- Colour: Natural
- Provides mechanical protection from abrasions, cuts, tears and perforations to your gloves
- Inner Gloves
- Material: Cotton
- Length: 280mm
- Colour: Cotton White
- Quantity: 5 pairs
- Designed for superior fit, comfort and sweat absorption
- Can be laundered and used repeatedly
- Glove Bag
- Material: Canvas
- Holds and protects your kit contents
- Talcum
- Colour: White
- Fragrance: Unscented
- Size: 100g
- Aids easy donning of insulating gloves
- Relieves and prevents excessive perspiration
Standards:
- IEC 60903 – Insulated Gloves
- AS/NZS IEC 60903:2020 – Insulated Gloves
- AS 60903:2022* – Insulated Gloves
- HRC2 >10cal/cm2
- NFPA 70E
*Type tested and complies to standard
Kit Contents:
-
- Class 00 Gloves 280mm – SKU: GLOVE00
- Outer Gloves – SKU: GLOVEOUTER
- 5 x Pair of Deluxe Inner Gloves – SKU: GLOVEINNERD
- Glove Bag – SKU: BAG-GLOVE1
- Talcum – SKU: GLOVETALC
(0 reviews) - Class 00 500V Insulated Gloves
-
Other Diagnostic ToolsVOLT SAFETY Electrical Insulated Glove Kit Class 00-a 650V
Volt Safety Electrical Insulated Glove Kit – Class 00-a 650V is ideal for anyone working within the electrical industry. We all know when you are working with electricity there are occupational hazards, primarily Electric Shock and Arc Flash. These kits come complete with everything you need to protect yourself with, use, store and maintain your gloves. They of course come complete with a current test report.
Insulated gloves offer personal protection against electrical shocks when working on or near electrical equipment. They come in different classes and sizes to accommodate for every individual, task and scenario.
Key Features:
- Class 00-a 650V Insulated Gloves
- Class: Class 00-a 650V
- Sizes: 08, 08.5, 09, 09.5, 10, 10.5, 11
- Length: 360mm
- Thickness: <0.7mm
- Cuff: Rolled Edge
- Colour: Yellow or Orange – Please see statement below Product title
- Ergonomic design for greater comfort
- Manufactured with premium latex rubber for durability and flexibility
- Flared cuff allows room for clothing and circulation
- Outer Gloves
- Material: Goat Skin
- Length: 230mm
- Cuff: Velcro Tightening
- Colour: Natural
- Provides mechanical protection from abrasions, cuts, tears and perforations to your gloves
- Inner Gloves
- Material: Cotton
- Length: 280mm
- Colour: Cotton White
- Quantity: 5 pairs
- Designed for superior fit, comfort and sweat absorption
- Can be laundered and used repeatedly
- Glove Bag
- Material: Canvas
- Holds and protects your kit contents
- Talcum
- Colour: White
- Fragrance: Unscented
- Size: 100g
- Aids easy donning of insulating gloves
- Relieves and prevents excessive perspiration
Standards:
- IEC 60903 – Class 00-a Gloves
- HRC2 >10cal/cm2
- NFPA 70E
Kit Contents:
-
- Class 00-a Gloves – SKU: GLOVE00-a-N-
- Outer Gloves – SKU: GLOVEOUTER
- 5 x Pair of Deluxe Inner Gloves – SKU: GLOVEINNERD
- Glove Bag – SKU: BAG-GLOVE1
- Talcum – SKU: GLOVETALC
(0 reviews) - Class 00-a 650V Insulated Gloves
-
Other Diagnostic ToolsVOLT SAFETY Electrical Insulated Glove Kit Class 1 7.5kV
Volt Safety Electrical Insulated Glove Kit – Class 1 7.5kV is ideal for anyone working within the electrical industry. We all know when you are working with electricity there are occupational hazards, primarily Electric Shock and Arc Flash. These kits come complete with everything you need to protect yourself with, use, store and maintain your gloves. They of course come complete with a current test report.
Insulated gloves offer personal protection against electrical shocks when working on or near electrical equipment. They come in different classes and sizes to accommodate for every individual, task and scenario.
Key Features:
- Class 1 7.5kV Insulated Gloves
- Class: Class 1
- Maximum Use Voltage AC: 7.5kV AC Voltage
- Maximum Use Voltage DC: 11.25kV DC Voltage
- Sizes: 08, 09, 10, 11, 12
- Length: 360mm
- Thickness: <1.5mm
- Cuff: Rolled Edge
- Colour: Black and Red
- Ergonomic design for greater comfort
- Manufactured with premium latex rubber for durability and flexibility
- Dual colour to allow for easier visual inspection
- Outer Gloves
- Material: Cow Hide
- Length: 320mm
- Cuff: Velcro Tightening
- Colour: Natural
- Provides mechanical protection from abrasions, cuts, tears and perforations to your gloves
- Inner Gloves
- Material: Cotton
- Length: 280mm
- Colour: Cotton White
- Quantity: 5 pairs
- Designed for superior fit, comfort and sweat absorption
- Can be laundered and used repeatedly
- 3 Compartment Glove Bag
- Material: Canvas
- Holds and protects your kit contents
- Talcum
- Colour: White
- Fragrance: Unscented
- Size: 100g
- Aids easy donning of insulating gloves
- Relieves and prevents excessive perspiration
Standards:
- IEC 60903 – Insulated Gloves
- AS/NZS IEC 60903:2020 – Insulated Gloves
- AS 60903:2022* – Insulated Gloves
- HRC2 >10cal/cm2
- NFPA 70E
*Type tested and complies to standard
Kit Contents:
-
- Class 1 Gloves 360mm – SKU: GLOVE1
- HV Outer Gloves – SKU: GLOVEOUT HV
- 5 x Pair of Deluxe Inner Gloves – SKU: GLOVEINNERD
- Glove Bag – SKU: BAG-GLOVE3
- Talcum – SKU: GLOVETALC
(0 reviews) - Class 1 7.5kV Insulated Gloves
-
Other Diagnostic ToolsVOLT SAFETY Electrical Insulated Glove Kit Class 2 17kV
Volt Safety Electrical Insulated Glove Kit – Class 2 17kV is ideal for anyone working within the electrical industry. We all know when you are working with electricity there are occupational hazards, primarily Electric Shock and Arc Flash. These kits come complete with everything you need to protect yourself with, use, store and maintain your gloves. They of course come complete with a current test report.
Insulated gloves offer personal protection against electrical shocks when working on or near electrical equipment. They come in different classes and sizes to accommodate for every individual, task and scenario.
Key Features:
- Class 2 17kV Insulated Gloves
- Class: Class 2
- Maximum Use Voltage AC: 17kV AC Voltage
- Maximum Use Voltage DC: 25.5kV DC Voltage
- Sizes: 08, 09, 10, 11, 12
- Length: 360mm
- Thickness: <2.3mm
- Cuff: Rolled Edge
- Colour: Black and Red
- Ergonomic design for greater comfort
- Manufactured with premium latex rubber for durability and flexibility
- Dual colour to allow for easier visual inspection
- Outer Gloves
- Material: Cow Hide
- Length: 320mm
- Cuff: Velcro Tightening
- Colour: Natural
- Provides mechanical protection from abrasions, cuts, tears and perforations to your gloves
- Inner Gloves
- Material: Cotton
- Length: 280mm
- Colour: Cotton White
- Quantity: 5 pairs
- Designed for superior fit, comfort and sweat absorption
- Can be laundered and used repeatedly
- 3 Compartment Glove Bag
- Material: Canvas
- Holds and protects your kit contents
- Talcum
- Colour: White
- Fragrance: Unscented
- Size: 100g
- Aids easy donning of insulating gloves
- Relieves and prevents excessive perspiration
Standards:
- IEC 60903 – Insulated Gloves
- AS/NZS IEC 60903:2020 – Insulated Gloves
- AS 60903:2022* – Insulated Gloves
- HRC2 >10cal/cm2
- NFPA 70E
*Type tested and complies to standard
Kit Contents:
-
- Class 2 Gloves 360mm – SKU: GLOVE2
- HV Outer Gloves – SKU: GLOVEOUT HV
- 5 x Pair of Deluxe Inner Gloves – SKU: GLOVEINNERD
- Glove Bag – SKU: BAG-GLOVE3
- Talcum – SKU: GLOVETALC
(0 reviews) - Class 2 17kV Insulated Gloves
-
Other Diagnostic ToolsVOLT SAFETY Electrical Insulated Glove Kit Class 3 26.5kV
Volt Safety Electrical Insulated Glove Kit – Class 3 26.5kV is ideal for anyone working within the electrical industry. We all know when you are working with electricity there are occupational hazards, primarily Electric Shock and Arc Flash. These kits come complete with everything you need to protect yourself with, use, store and maintain your gloves. They of course come complete with a current test report.
Insulated gloves offer personal protection against electrical shocks when working on or near electrical equipment. They come in different classes and sizes to accommodate for every individual, task and scenario.
Key Features:
- Class 3 26.5kV Insulated Gloves
- Class: Class 3
- Maximum Use Voltage AC: 26.5kV AC Voltage
- Maximum Use Voltage DC: 39.75kV DC Voltage
- Sizes: 08, 09, 10, 11, 12
- Length: 410mm
- Thickness: <2.9mm
- Cuff: Rolled Edge
- Colour: Black and Red
- Ergonomic design for greater comfort
- Manufactured with premium latex rubber for durability and flexibility
- Dual colour to allow for easier visual inspection
- Outer Gloves
- Material: Cow Hide
- Length: 320mm
- Cuff: Velcro Tightening
- Colour: Natural
- Provides mechanical protection from abrasions, cuts, tears and perforations to your gloves
- Inner Gloves
- Material: Cotton
- Length: 280mm
- Colour: Cotton White
- Quantity: 5 pairs
- Designed for superior fit, comfort and sweat absorption
- Can be laundered and used repeatedly
- 3 Compartment Glove Bag
- Material: Canvas
- Holds and protects your kit contents
- Talcum
- Colour: White
- Fragrance: Unscented
- Size: 100g
- Aids easy donning of insulating gloves
- Relieves and prevents excessive perspiration
Standards:
- IEC 60903 – Insulated Gloves
- AS/NZS IEC 60903:2020 – Insulated Gloves
- AS 60903:2022* – Insulated Gloves
- HRC2 >10cal/cm2
- NFPA 70E
*Type tested and complies to standard
Kit Contents:
-
- Class 3 Gloves 410mm – SKU: GLOVE3
- HV Outer Gloves – SKU: GLOVEOUT HV
- 5 x Pair of Deluxe Inner Gloves – SKU: GLOVEINNERD
- Glove Bag – SKU: BAG-GLOVE3
- Talcum – SKU: GLOVETALC
(0 reviews) - Class 3 26.5kV Insulated Gloves
-
Other Diagnostic ToolsVOLT SAFETY Electrical Insulated Glove Kit Class 4 36kV
Volt Safety Electrical Insulated Glove Kit – Class 4 36kV is ideal for anyone working within the electrical industry. We all know when you are working with electricity there are occupational hazards, primarily Electric Shock and Arc Flash. These kits come complete with everything you need to protect yourself with, use, store and maintain your gloves. They of course come complete with a current test report.
Insulated gloves offer personal protection against electrical shocks when working on or near electrical equipment. They come in different classes and sizes to accommodate for every individual, task and scenario.
Key Features:
- Class 4 36kV Insulated Gloves
- Class: Class 4
- Maximum Use Voltage AC: 36kV AC Voltage
- Maximum Use Voltage DC: 54kV DC Voltage
- Sizes: 08, 09, 10, 11, 12
- Length: 410mm
- Thickness: <3.6mm
- Cuff: Rolled Edge
- Colour: Black and Red
- Ergonomic design for greater comfort
- Manufactured with premium latex rubber for durability and flexibility
- Dual colour to allow for easier visual inspection
- Outer Gloves
- Material: Cow Hide
- Length: 320mm
- Cuff: Velcro Tightening
- Colour: Natural
- Provides mechanical protection from abrasions, cuts, tears and perforations to your gloves
- Inner Gloves
- Material: Cotton
- Length: 280mm
- Colour: Cotton White
- Quantity: 5 pairs
- Designed for superior fit, comfort and sweat absorption
- Can be laundered and used repeatedly
- 3 Compartment Glove Bag
- Material: Canvas
- Holds and protects your kit contents
- Talcum
- Colour: White
- Fragrance: Unscented
- Size: 100g
- Aids easy donning of insulating gloves
- Relieves and prevents excessive perspiration
Standards:
- IEC 60903 – Insulated Gloves
- AS/NZS IEC 60903:2020 – Insulated Gloves
- AS 60903:2022* – Insulated Gloves
- HRC2 >10cal/cm2
- NFPA 70E
*Type tested and complies to standard
Kit Contents:
-
- Class 4 Gloves 410mm – SKU: GLOVE4
- HV Outer Gloves – SKU: GLOVEOUT HV
- 5 x Pair of Deluxe Inner Gloves – SKU: GLOVEINNERD
- Glove Bag – SKU: BAG-GLOVE3
- Talcum – SKU: GLOVETALC
(0 reviews) - Class 4 36kV Insulated Gloves
-
Other Diagnostic ToolsVOLT SAFETY Electrical Insulated Gloves Class 0 1000V – Catu
CATU Electrical Insulated Gloves Class 0 1000V are designed for electrical protection and certified to IEC 60903 standards. Made from high-quality natural rubber, these gloves ensure optimal comfort, flexibility, and safety during low-voltage electrical work. Essential PPE for electricians and maintenance personnel working in energised environments.
Key Features:
- Sizes: 07, 08, 09, 10, 11, 12
- Class: Class0 – 1000V
- Length: 360mm
- Cuff: Rolled edge
- Colour: Red
- Ergonomic with high flexibility for an easy daily work
Standards:
- PPE Category 3
- EN 60903
- IEC 61482-1-2
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Electrical Insulated Gloves Class 00 500V – Catu
CATU Electrical Insulated Gloves Class 00 500V are designed for electrical protection and certified to IEC 60903 standards. Made from high-quality natural rubber, these gloves ensure optimal comfort, flexibility, and safety during low-voltage electrical work. Essential PPE for electricians and maintenance personnel working in energised environments.
Key Features:
- Sizes: 07, 08, 09, 10, 11, 12
- Class: Class00 – 500V
- Length: 360mm
- Cuff: Rolled edge
- Colour: Red
- Ergonomic with high flexibility for an easy daily work
Standards:
- PPE Category 3
- EN 60903
- IEC 61482-1-2
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Electrical Insulated Gloves Class 1 7.5kV – Catu
CATU Electrical Insulated Gloves Class 1 7.5kV are designed for electrical protection and certified to IEC 60903 standards. Made from high-quality natural rubber, these gloves ensure optimal comfort, flexibility, and safety during low-voltage electrical work. Essential PPE for electricians and maintenance personnel working in energised environments.
Key Features:
- Sizes: 07, 08, 09, 10, 11, 12
- Class: Class 1 – 7.5kV
- Length: 360mm
- Cuff: Rolled Edge
- Colour: Red
- Material: Latex
- Ergonomic with high flexibility for an easy daily work
Standards:
- EN 60903
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Electrical Insulated Gloves Class 2 17kV – Catu
CATU Electrical Insulated Gloves Class 2 17kV are designed for electrical protection and certified to IEC 60903 standards. Made from high-quality natural rubber, these gloves ensure optimal comfort, flexibility, and safety during low-voltage electrical work. Essential PPE for electricians and maintenance personnel working in energised environments.
Key Features:
- Sizes: 07, 08, 09, 10, 11, 12
- Class: Class 2 – 17kV
- Length: 360mm
- Cuff: Rolled Edge
- Colour: Red
- Material: Latex
- Ergonomic with high flexibility for an easy daily work
Standards:
- EN 60903
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Electrical Insulated Gloves Class 3 26.5kV – Catu
CATU Electrical Insulated Gloves Class 3 26.5kV are designed for electrical protection and certified to IEC 60903 standards. Made from high-quality natural rubber, these gloves ensure optimal comfort, flexibility, and safety during low-voltage electrical work. Essential PPE for electricians and maintenance personnel working in energised environments.
Key Features:
- Sizes: 08, 09, 10, 11, 12
- Class: Class 3 – 26.5kV
- Length: 360mm
- Cuff: Rolled Edge
- Colour: Red
- Material: Latex
- Ergonomic with high flexibility for an easy daily work
Standards:
- EN 60903
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Electrical Insulated Gloves Class 4 36kV – Catu
CATU Electrical Insulated Gloves Class 4 36kV are designed for electrical protection and certified to IEC 60903 standards. Made from high-quality natural rubber, these gloves ensure optimal comfort, flexibility, and safety during low-voltage electrical work. Essential PPE for electricians and maintenance personnel working in energised environments.
Key Features:
- Sizes: 09, 10, 11, 12
- Class: Class 4 – 36kV
- Length: 360mm
- Cuff: Rolled Edge
- Colour: Red
- Material: Latex
- Ergonomic with high flexibility for an easy daily work
Standards:
- EN 60903
(0 reviews) -
Other Diagnostic ToolsVOLT SAFETY Gold Visor and Cap Style Hard Hat Kit – Elliotts
Elliotts ELLGARD Gold Visor is made from rigid 1.5 mm polycarbonate and is optically polished and coated with a thin film of 24ct gold, which is very effective at reflecting and blocking heat. This kit also includes a Visor Holder and a High Heat Type 2 Polycarbonate Cap Style Hard Hat.
Key Features:
- Kit Includes:
- ELLGARD Gold Visor
- Visor Holder
- High Heat Type 2 Polycarbonate Cap Style Hard Hat
- Dimensions: 25.4 cm x 50.8 cm x 0.15 cm
- 1.5 mm polycarbonate clear visor
- Field-tested to 1400°C
- This layer of gold is very effective at reflecting and blocking heat
- Ideal for protection from radiant heat
(0 reviews) - Kit Includes:
-
Other Diagnostic ToolsVOLT SAFETY Heat Resistant Aluminised Preox Gloves – Elliotts
Elliotts ELLGARD Heat Resistant Aluminised Preox Gloves are designed to be worn in environments where there are large amounts of radiant heat and contact heat.
Key Features:
- Length: 406mm
- Size: Large
- Materials:
- Woven aramid palm
- PR720 aluminised preox back
- T-GARD N260 liner
- Woven aramid palm for best contact heat and cut resistance protection
- Wear seams are welted for additional protection
- All seams are sewn with heat-resistant aramid thread for extra durability
Standards:
- AS/NZS 2161.3 (EN388)
- AS/NZS 2161.4 (EN407)
(0 reviews)