Shop
Showing 1225–1260 of 8900 results
-
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ CONDUSIL Silver Electrically Conductive Grease
Thermalle™ CONDUSIL Silver Electrically Conductive Grease
Thermalle™ CONDUSIL Silver Electrically Conductive Grease is formulated with pure silver-based additives to provide excellent electrical conductivity for high performance. Containing no graphite or mercury, it reduces resistance and eliminates hot spots in hinge joints and knife blade switches caused by poor contact.
CONDUSIL has high lubricity and prevents galling while protecting against moisture intrusion and resisting the build-up of corrosion across a wide operating temperature range. It is compatible with metals, plastics, and rubbers, and ideal for preventing data errors and power interruptions in ignition systems, RF transformers, switches, sliding contacts, and many other electrical connections.
CONDUSIL is commonly used in the electronics, automotive, and aerospace industries.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ ELECTRASEAL-COPPER Electrical Jointing Compound
Thermalle™ ELECTRASEAL-COPPER Electrical Jointing Compound
Thermalle™ ELECTRASEAL-COPPER Electrical Jointing Compound is a no-set, no-flow, non-drying pliable compound for improving electrical connections between copper conductors. It provides excellent, reliable, and long-lasting electrical conductivity, corrosion protection from oxidation, and high resistance to water, moisture, dust, and other negative environmental factors.
ELECTRASEAL-COPPER is formulated with a solvent refined mineral oil base and is non-flammable and non-toxic. It is ideal for use in a wide range of applications including power distribution systems, telecommunication networks, underground cabling, electrical equipment and components, and many other industrial installations.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ ELECTRASEAL-NICKEL Electrical Jointing Compound
Thermalle™ ELECTRASEAL-NICKEL Electrical Jointing Compound
Thermalle™ ELECTRASEAL-NICKEL Electrical Jointing Compound is a high quality no-set, no-flow, non-drying compound formulated for use on aluminium-to-aluminium and aluminium-to-copper pad-to-pad or palm-to-palm joints. It has a mineral oil base and remains pliable, even at low temperatures, allowing for easy joint disassembly and reassembly.
ELECTRASEAL-NICKEL is formulated with highly conductive materials that ensure low resistance electrical connections continue with excellent conductivity. It is water resistant and will stop corrosion from forming when in the presence of moisture caused by environmental factors.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ ELECTRASEAL-ZINC Electrical Jointing Compound
Thermalle™ ELECTRASEAL-ZINC Electrical Jointing Compound
Thermalle™ ELECTRASEAL-ZINC Electrical Jointing Compound is a high quality no-set, no-flow, non-drying compound formulated for use on aluminium-to-aluminium and aluminium-to-copper bolted and compression settings. It has a mineral oil base and remains pliable, even at low temperatures, allowing for easy joint disassembly and reassembly.
ELECTRASEAL-ZINC is formulated with highly conductive materials that ensure low resistance electrical connections continue with excellent conductivity. It is water resistant and will stop corrosion from forming when in the presence of moisture caused by environmental factors.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
TapesCHEMTOOLS Thermalle™ HEATFLEX High Temperature Polyimide Tape
Thermalle™ HEATFLEX High Temperature Polyimide Tape
Thermalle™ HEATFLEX High Temperature Polyimide Tape, made from polyimide film and a cross-linked silicone adhesive, is radiation, flame, solvent, acid, moisture, and heat resistant, and designed for both permanent and temporary bonding. It offers excellent electrical and thermal insulation in demanding environments, and features an exceptionally thin backing that leaves no residue or stain upon removal.
HEATFLEX resists punctures, abrasion, and tearing, and is suitable for use in a vaccum environment. It has minimal shrinkage after baking, high vibration resistance, and unique mechanical properties, including a wide temperature range and high dielectric strength.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ OXYGUARD Non-Flammable Oxygen Safe Grease with PFPE
Thermalle™ OXYGUARD Non-Flammable Oxygen Safe Grease with PFPE
Thermalle™ OXYGUARD Non-Flammable Oxygen Safe Grease with PFPE is a medium viscosity perfluorinated polyether base oil, thickened with PTFE for exceptional thermal stability and chemical resistance. It is a premium formulation offering extreme long-term lubrication, sealing, and anti-wear properties for the most aggressive chemical and gas applications.
OXYGUARD is suitable for high pressure air, nitrous oxide, and oxygen (gas and liquid) systems with no fear of combustion. It is physically and chemically inert, totally resistant to water and all common chemicals, resistant to oxidation and thermal degradation, and compatible with metals, plastics, and elastomers.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ SILVER-FROST Silver Thermally Conductive Grease (Heatsink Compound)
Thermalle™ SILVER-FROST Silver Thermally Conductive Grease (Heatsink Compound)
Thermalle™ SILVER-FROST Silver Thermally Conductive Grease is an exceptional thermal interface paste which greatly amplifies conductivity in applications with small voids or uneven surfaces. It is a premium, highly reliable and stable material which has been specially formulated for efficient heat transfer and the prevention of current leakage. SILVER-FROST is non-flowing and silicone-free with low bleed paste and a high concentration of silver particles and other proprietary fillers that offer improved conductivity by occupying and sealing voids between mating surfaces.
SILVER-FROST dissipates heat efficiently and effectively to reduce overheating and component failure across a wide operating temperature range. It offers versatility in its suitability to both sensitive medical devices through to complicated automotive, aerospace, and defence equipment. Compatibility also includes CPU and GPU cooling, LED lighting, motors, transformers, and general industrial electronics.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ SUB-ZERO Silicone Thermally Conductive Grease (Heatsink Compound)
Thermalle™ SUB-ZERO Silicone Thermally Conductive Grease (Heatsink Compound)
Thermalle™ SUB-ZERO Silicone Thermally Conductive Grease is a high-performance non-flowing thermal interface material for use in electronic applications that require efficient heat transfer without concern of corroding elements. It is formulated with a silicone base and high-quality thermally conductive fillers to provide excellent conductivity and stability over a wide temperature range across all heat generating devices.
SUB-ZERO is a non-corrosive viscous paste displaying low bleed for long lasting performance and suitability across a wide range of materials. It is commonly used in computer processors, graphics cards, power supplies, and lighting systems, and can be found in the automotive industry applied to engine control units, power steering systems, and transmission control modules.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ TEF-EASE Dielectric Dissimilar Metals Anti-Corrosion & Anti-Seizing Gel
Thermalle™ TEF-EASE Dielectric Dissimilar Metals Anti-Corrosion & Anti-Seizing Gel
Thermalle™ TEF-EASE Dielectric Dissimilar Metals Anti-Corrosion & Anti-Seizing Gel is a pure synthetic grease with no silica, petroleum additives or volatile solvents. It contains sub-micron sized PTFE particles for corrosion prevention and resistance to seizure and galling.
With excellent electrical insulation and protection through its dielectric properties, TEF-EASE can be used on dissimilar metals across a wide temperature range without curing or melting. It is completely waterproof and resists wash-out in both salt and fresh water, performing perfectly under extreme pressures and high loads.
TEF-EASE adheres well to surfaces, ensuring long-lasting lubrication and prevention of metal-to-metal contact. It is also compatible with most plastics and rubbers.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ TEF-GLIDE Electrical & Automotive White Lithium Grease
Thermalle™ TEF-GLIDE Electrical & Automotive White Lithium Grease
Thermalle™ TEF-GLIDE Electrical & Automotive White Lithium Grease is a premium multi-purpose lithium-based grease offering excellent lubrication and superior wear protection for a variety of uses across many industries, although more commonly found inside an auto-mechanic’s tool kit. It resists water and protects from corrosion, and with a high drop point, remains smooth and buttery under a wide operating temperature range.
Fortified with PTFE for enhanced lubricity and reliable performance, TEF-GLIDE is compatible with most metals and plastics and is ideal for sliding tracks, bearings, hinges, and locks. Non-toxic and environmentally safe, it is suitable for use outdoors on garden and farming machinery and marine equipment under most environmental conditions.
TEF-GLIDE is highly recommended for corrosion prevention on battery terminals and metal surfaces.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ VACUSEAL Silicone-Free High Vacuum Grease
Thermalle™ VACUSEAL Silicone-Free High Vacuum Grease
Thermalle™ VACUSEAL Silicone-Free High Vacuum Grease is a high-quality, non-toxic lubricant formulated specifically for use in vacuum systems. It is a good general purpose hydrocarbon grease that contains microparticles of PTFE and is compatible with most metal, plastic, and elastomer system components, being free of silicone, halogens, and heavy metals.
VACUSEAL provides needed lubrication and sealing of o-rings, gaskets, and valves, and is resistant to oxidation and thermal degradation at temperatures below 30°C.
Note: Due to its hydrocarbon content, VACUSEAL is not compatible with rubber, PVC, EPDM, and EPR seals.
NOTE: VACUSEAL is NOT recommended for any product that may warm to or exceed 30°C. For applications with higher temperatures, it is recommended to use VACUSEAL PLUS, a silicone-based high vacuum grease for temperatures up to 260°C (Part No. CT-TM012 – Available in all sizes mentioned above).
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ VACUSEAL-PLUS Silicone High Vacuum Grease
Thermalle™ VACUSEAL-PLUS Silicone High Vacuum Grease
Thermalle™ VACUSEAL-PLUS Silicone High Vacuum Grease is a high-quality lubricant for use in pressure and vacuum units up to 10-6 millibars, to reduce leakage by filling gaps and lowering permeation rates. Its silicone base ensures resistance to oxidation and thermal degradation, and contains no additives that react negatively with system components.
VACUSEAL-PLUS lubricates and seals metals, plastics, and elastomers, including o-rings, gaskets, taps, and plug and control valves, and offers high lubricity for sliding and rolling bearings and gears in pumps and compressors under wide and high temperature conditions. It performs well as an anti-seize for glass components while protecting from water ingress, corrosion formation, and most chemical intrusions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ VOLTGUARD Electrician’s Dielectric Grease
Thermalle™ VOLTGUARD Electrician’s Dielectric Grease
Thermalle™ VOLTGUARD Electrician’s Dielectric Grease is a premium, non-toxic silicone-based grease that provides superior electrical insulation, excellent lubrication and water resistance, and high corrosion protection in a wide range of applications. It is non-curing, non-melting, and formulated to withstand extreme temperatures and harsh environments, with an operating range of -50°C to 200°C.
Compatible with most plastics and rubbers, and suitable for use around o-rings and seals, VOLTGUARD is commonly applied to bulbs and connectors (see below), spark plug boots, battery terminals, automotive ignition systems, electrical switches, and more.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Twist Lock Helical Static Mixing Nozzle
(10:1 Ratio, Suitable for 50ml Dual Cartridges)
The Twist Lock Helical Static Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The smooth, tapered nozzle allows for dispensing directly onto surfaces to be glued, while its rounded shape ensures an easy fit into tight spaces.
The spiralling/bow-tie elements of the inner core repeatedly divide and combine both materials in a circular flow to provide consistent, high quality intermixing, effectively channelling the material radially from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-TL-50 is specially designed for use with most 10:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Twist Lock Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 25ml & 50ml Dual Cartridges)
The Twist Lock Helical Static Mixing Nozzle contains 16 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-TL-25 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Vio-Flux High Activity Flux Paste
Vio-Flux High Activity Flux Paste
Vio-Flux High Activity Flux Paste is an acid-based flux for use with stainless steel, monel, inconel, high-chrome alloys, nickel, copper, brass, ferrous alloys, soft metals, and many more. The blend of acids used allow this flux to become active at room temperature, exerting a strong scavenging action to remove oxide coatings and other impurities, producing clean, strong joints.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Vio-Flux High Activity Liquid Flux
CT-VF Vioflux High Activity Industrial Liquid and Paste Fluxes
Vioflux is a general purpose acid based flux which is formulated for use with Stainless Steel, Monel, High-Chrome Alloys, Inconel, Nickel, Copper, Brass, Ferrous Alloys, soft metals and many more. The blend of acids used make this flux active at room temperature where it begins to clean metals and remove oxides. The flux exerts a strong scavenging action to remove oxide coatings and other impurities from the metal surface to produce strong joints.
It is available in liquid and paste form.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Zero Spat™ Heavy Duty Anti-Spatter
Zero Spat™ Heavy Duty Anti-Spatter
Zero Spat™ ASPR Anti-Spatter provides instant shielding action and eliminates the need for chiselling and grinding after welding, reducing clean-up times and high spatter removal costs by keeping post-weld mess to a minimum.
ASPR forms a wet film that prevents weld spatter from sticking to weld equipment, fixtures, and metal surfaces. Spatter and residue easily wipe away leaving a light film that protects against rust and corrosion.
This highly effective product is non-flammable, paintable, and does not cause weld porosity.
Features & Benefits
- Solvent-Based
- Powder coating friendly
- Prevents Rust and Corrosion
- Non-Flammable
- Silicone-Free
- Paintable
- Does not cause weld porosity
- Fast drying
- Improves productivity
- Minimises post-weld mess
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Zero Spat™ Heavy Duty Paintable Anti-Spatter
Zero Spat™ Heavy Duty Paintable Anti-Spatter
Zero Spat™ Heavy Duty Paintable Anti-Spatter is an easy wipe-off milky formula that provides instant shielding from medium to large amounts of spatter or slag. It performs exceptionally well, even after prolonged welds, significantly reducing or eliminating spatter adhesion to parts and tools, saving economically on clean-up times and spatter removal costs.
ASL does not cause weld porosity, is non-flammable, and is highly heat resistant with no risk of flash during welding. It is safe to use on most manual, auto, and robotic applications. Being water-based, ASL is non-toxic with a low odour and contains no chlorinated solvents to reduce fume formation and prevent corrosion.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Zero Spat™ NDG Nozzle Dipping Gel
Zero Spat™ NDG Nozzle Dipping Gel
Zero Spat™ NDG Nozzle Dipping Gel is specially formulated to prevent weld spatter from adhering to weld torch components, such as shrouds, nozzles, contact tips, jigs, diffusers and the weld area. It is designed to cool temperatures and prolong the life of MIG torch front end parts to improve welding quality and productivity.
Nozzle Dipping Gel is non-flammable with a low odour and excellent cooling properties. It is non-toxic and contains no harsh chemicals, silicones, fluorocarbons, or hydrocarbons.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Zero Spat™ Paintable Anti-Spatter
Zero Spat™ Paintable Anti-Spatter
Zero Spat™ Paintable Anti-Spatter prevents spatter adhesion on parts, tools, and metal components. It temporarily inhibits rust and corrosion, provides instant shielding, and is safe to use on most manual, automatic, and robotic applications. ASBLU contains no chlorinated solvents or silicones, which simplifies clean-up – especially if parts are to be painted or plated. It is non-flammable, non-toxic, and will not create weld porosity or pinholes.
Paintable Anti-Spatter is a heavy duty, economical solution which eliminates the need for grinding or brushing post-weld. It cleans away residue-free with a solvent and is suitable for medium to large amounts of spatter or slag.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Zero Spat™ Paintable Dry Anti-Spatter
Zero Spat™ Paintable Dry Anti-Spatter
Zero Spat™ DSPR Paintable Dry Anti-Spatter removes the need for chiselling and grinding after welding. It forms a long-lasting dry white film that prevents spatter from sticking to equipment, fixtures, and metal surfaces. Residue can be easily wiped or brushed away after welding is done, improving productivity and clean-up times, and decreasing high spatter removal costs.
Zero Spat™ DSPR adheres well to most surfaces where vertical welding is required. It can be used for MIG/MAG welding, manual, automatic, and robotic applications, and is suitable for medium to large amounts of spatter or slag.
Zero Spat™ DSPR Paintable Dry Anti-Spatter will not cause weld porosity, nor interfere with post-weld powder or paint coatings. Being silicone-free and non-oily removes the need to clean the surface with solvents prior to painting.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Zero Spat™ Protecta Shield Heavy Duty Dry Ceramic Coating
Zero Spat™ Protecta Shield Heavy Duty Dry Ceramic Coating
Zero Spat™ PTS Protecta Shield Heavy Duty Dry Ceramic Coating provides up to 8 hours of protection in a single application, allowing for significantly longer production times and shorter downtimes. It adheres well to most surfaces where vertical welding is required, forming a non-oily, heat-hardening film.
PTS prevents weld spatter from sticking to weld nozzles, MIG/MAG equipment, and laser/plasma cutting tools – including the product itself being welded. It will not cause weld porosity, nor interfere with post-weld powder or paint coatings, and can be easily brushed or wiped away post-weld.
With a robust, residue-free, non-flammable formula, Zero Spat™ PTS offers excellent adhesion to all metal surrounds, including fixtures, fittings, and other welding equipment.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
LockoutsCIRLOCK 13 Padlock Metal Group Lock Box (locks sold separately)
What is it: Group Lockout Box Application: Ensures lockout of energy sources on larger projects until all workers have removed their locks. Use for: Lockout situations where more than one person is involved &/or as padlock storage. Material: Sturdy Metal Construction Dimensions: 155mm x 255mm x 105mm Padlock Holes: 13 – suits padlocks up to 9mm shackle diameter Colour: Red, Blue or Yellow (0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
LockoutsCIRLOCK 16 Padlock Group Lock Boxes (locks sold separately)
What is it: Group Lockout Box Application: Ensures lockout of energy sources on larger projects until all workers have removed their locks. Use for: Lockout situations where more than one person is involved. Material: ABS and High Impact Acrylic Dimensions: 200mm x 150mm x 90mm high excluding carry handle Padlock Holes: 16 – suits padlocks up to 9mm shackle diameter Colour: Red/Yellow/Blue/Clear (0 reviews) -
LockoutsCIRLOCK 29 Padlock Group Lock Box – Heavy Duty Plastic (locks sold separately)
What is it: Group Lockout Box Application: Ensures lockout of energy sources on larger projects until all workers have removed their locks. Front sliding clear lid. Use for: Lockout situations where more than one person is involved. Material: ABS Plastics (Yellow and Clear) Dimensions: 330mm w x 280mm h x 90mm d Padlock Holes: 29 holes Colour: Yellow/Clear (0 reviews) -
LockoutsCIRLOCK 38mm Non-Conductive Lockout Padlock (Light Weight)
PART NUMBER: SLP-538-SERIES WHAT IS IT: Safety Lockout Padlock – Key Retaining – One Key per Lock included as standard APPLICATION: Various USE FOR: Locking out energy sources MATERIAL: Nylon Body and Nylon Non-Conductive Shackle BODY DIMENSIONS: 45mm (H) x 38mm (W) x 19mm (D) SHACKLE DIMENSIONS: 5 x 38mm COLOUR: RED
BLUE
YELLOW
ORANGE
GREEN
WHITE
PURPLE
BLACK(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
LockoutsCIRLOCK 38mm Stainless Steel Safety Lockout Padlock
<td “=””>38mm Stainless Steel Shackle Safety Lockout Padlock- Key Retaining – One Key per Lock included as standard
PART NUMBER: SLP-438-SERIES WHAT IS IT: APPLICATION: Various USE FOR: Locking out energy sources MATERIAL: Nylon Body and Stainless Steel Shackle BODY DIMENSIONS: 45mm (H) x 38mm (W) x 19mm (D) SHACKLE DIMENSIONS: 5 x 38mm COLOUR: RED
BLUE
YELLOW
ORANGE
GREEN
WHITE
PURPLE
BLACK(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
LockoutsCIRLOCK 4 Padlock Mini Group Lock Box (locks sold separately)
What is it: Mini Group Lock Box Application: Ideal in small team situations – easy to transport & store Use for: Lockout situations where more than one person is involved Material: High Impact Plastic Internal Measurements: 86mm Long x 45mm Wide x 42mm Deep Padlock Holes: 4 x 7mm Colour: Red with clear (frosted) lid (0 reviews) -
LockoutsCIRLOCK 50mm Non-Conductive Lockout Padlock (Heavy Duty)
PART NUMBER: SLP-750-SERIES WHAT IS IT: Safety Lockout Padlock- Non Conductive Heavy Duty Shackle – Key Retaining – One Key per Lock included as standard APPLICATION: Various USE FOR: Locking out energy sources MATERIAL: Nylon Body and Nylon Non-Conductive Shackle BODY DIMENSIONS: 45mm (H) x 38mm (W) x 19mm (D) SHACKLE DIMENSIONS: 6.25mm x 50mm COLOURS AVAILABLE: RED
YELLOW(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Lockouts
CIRLOCK 50mm Non-Conductive Lockout Padlock (Light Weight)
<td “=””>Safety Lockout Padlock- Key Retaining – One Key per Lock included as standard
PART NUMBER: SLP-550-SERIES WHAT IS IT: APPLICATION: Various USE FOR: Locking out energy sources MATERIAL: Nylon Body and Nylon Non-Conductive Shackle BODY DIMENSIONS: 45mm (H) x 38mm (W) x 19mm (D) SHACKLE DIMENSIONS: 5 x 50mm COLOUR: RED
BLUE
YELLOW
ORANGE
GREEN
WHITE
PURPLE
BLACK(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
LockoutsCIRLOCK 50mm Shackle Economical Brass Lockout Padlock
PART NUMBER: SLP-150-SERIES WHAT IS IT: Economical Safety Lockout Padlock APPLICATION: Various USE FOR: Locking out energy sources MATERIAL: Brass Body, Hardened Alloy Steel Shackle and coloured Nylon Sleeve BODY DIMENSIONS: 29mm (H) x 34mm (W) x 16mm (D) SHACKLE DIMENSIONS: 5 x 50mm COLOUR: RED
BLUE
YELLOW
ORANGE
GREEN
WHITE
PURPLE
BLACK
PINK(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
LockoutsCIRLOCK 50mm Stainless Steel Safety Lockout Padlock
<td “=””>Safety Lockout Padlock – Key Retaining – One Key per Lock included as standard
PART NUMBER: SLP-450-SERIES WHAT IS IT: APPLICATION: Various USE FOR: Locking out energy sources MATERIAL: Nylon Body and Stainless Steel Shackle BODY DIMENSIONS: 45mm (H) x 38mm (W) x 19mm (D) SHACKLE DIMENSIONS: 5 x 50mm COLOUR: RED
BLUE
YELLOW
ORANGE
GREEN
WHITE
PURPLE
BLACK(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
LockoutsCIRLOCK 83 Padlock Aluminium Slimline Group Lock Box (locks sold separately)
What is it: Group Lockout Box Application: Ensures lockout of energy sources on larger projects until all workers have removed their locks. Use for: Lockout situations where more than one person is involved &/or as padlock storage.
External Procedure holderMaterial: Light weight heavy duty Polycarbonate clear lid Dimensions: 680mm (H) x 340mm (W) x 35mm (D) Padlock Holes: 83 Padlock holes Colour: Powder coated Red – other colours available upon request (0 reviews) -
LockoutsCIRLOCK 84 Padlock – Large Aluminium Group Lock Box (locks sold separately)
What is it: Group Lockout Box Application: Ensures lockout of energy sources on larger projects until all workers have removed their locks.
Clear tough Polycarbonate front sliding cover.
Procedure can be clipped on lid or inside.Use for: Lockout situations where more than one person is involved.
Use as a Group Lock Box, and/or for Padlock Storage.Material: Sturdy Aluminium construction Dimensions: 450mm x 500mm x 160mm Padlock Holes: Lockout holes for up to 84 padlocks with up to 9mm shackles
Hooks inside for 66 padlocks – locks not includedColour: Available in RED as standard – other colours available upon request (0 reviews) -
LockoutsCIRLOCK Aluminium Group Lock Box – 20 Padlocks (locks sold separately)
What is it: Group Lock Box – Sturdy Aluminium ConstructionClear tough Poly carbonate front sliding cover Dimensions: 320mm x 405mm x 150mm Colour Red as standard – other colours available upon request Use For: Ensures lockout of energy sources on larger projects until all workers have removed their locks and/or for Padlock Storage.
Suitable for wall mounting, also has convenient carry handle.
Room for procedures in 3 places:
– Inside double layered lid
– Outside clip on lid
– At back of box
Lockout holes for up to 20 padlocks with up to 9mm shackles
Hooks inside for large qty of keys to hang
Hooks inside for 24 padlocks
Removable studs in double layered lid prevents it from being removed(0 reviews)
