Shop
Showing 1189–1224 of 5583 results
-
BrushwareCHEMTOOLS Rapidstick™ Scratch Brush
3 rows of stiff hog hair bristles. Great for the removal of sticky glues or crusty materials. Use wet or dry.
• Full Length: 195mm
• Brush Size: 12mm (L) x 36mm x 8mm(0 reviews) -
TapesCHEMTOOLS Rapidstick™ Self Fusing Silicone Repair Tape
Rapidstick™ Self Fusing Silicone Repair Tape
Rapidstick™ Self Fusing Silicone Repair Tape is an excellent sealant for plumbing, vents, and ducts under stress from extreme conditions and environments. It offers high tensile and dielectric strengths, remaining flexible in temperatures as low as -62°C.
Made from high grade stretchable silicone which will not become gummy over the course of time, Silicone Repair Tape insulates immediately upon stretching and wrapping to form an air-tight and waterproofed seal. It remains tear and abrasion resistant and will withstand heat up to 260°C. Removal by razor can occur after full cure (24 hours), without leaving any sticky surface residues behind.
Features & Benefits:
– Non-flammable
– Absorbs vibration
– Resists acids, fuels, oils, salt water, UV rays, and many solvents
– Withstands pressure, voltage, moisture, corrosion, and many contaminantsOther Recommended Uses:
☑ Adding grip to tools and sports equipment
☑ Connecting wire harnesses
☑ Wrapping cables
☑ Securing boat and RV hookups(0 reviews) -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Rapidstick™ Silicone Potting Compound
Rapidstick™ Silicone Potting Compound is a room temperature curing RTV rubber which features excellent electrical insulation, high moisture resistance, and a wide temperature range of -60°C to 300°C. Being of relatively low viscosity, it allows complete encapsulation for weather-proofing and mechanical shock protection, and is non-corrosive to copper.
Silicone Potting Compound arrives in a two-part kit – Part A (Resin) and Part B (Hardener) – both parts of which are easily combined at a ratio of 1:1 (by volume). Mixing and application may be performed manually or mechanically, with the cured elastomer drying opaque and moderately hard.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Brushware
CHEMTOOLS Rapidstick™ Soft Brass Brush
Heavy duty triple row cleaning brush. Secured high grade brass steel bristles. Removes chemical build-up and flux deposits. Ideal for cleaning hot soldering tips without damage.
• Full Length: 195mm
• Brush Size: 12mm (L) x 26mm x 8mm(0 reviews) -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Rapidstick™ Surface Mount Epoxy (Red)
Rapidstick™ Surface Mount Epoxy is an easy-to-use one-part epoxy adhesive, specially designed for electronic assemblies. It bonds surfaces of mounted devices to printed circuit boards prior to double-sided reflow or wave solder assembly, and is ideally suited to printing a range of dot heights with one stencil thickness, and where high wet strength characteristics and high print speeds are necessary.
Surface Mount Epoxy has rapid thermal cure properties, robust handling characteristics, and is formulated to resist shear thinning. The viscosity and surface tension prove ideal for high speed placement equipment.
SME offers excellent adhesion to metal, ceramics, and glass-filled epoxy surfaces, and is suitable for all open squeegee and enclosed head stencil printing systems.
Specifications (refer to TDS for full details)
- Colour: Red
- Viscosity: 600 – 1,000 Thixotropic
- Specific Gravity: 113
- Boiling Point: > 260°C
- Tensile Strength: 11,500 psi
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BrushwareCHEMTOOLS Rapidstick™ Vertical Scrubbing Brush
Strong, wide, hardwood handle. Double row of hog hair bristles. Ideal for dusting and general clean-up. Use wet or dry.
• Handle Length: 126mm
• Full Length: 139mm
• Brush Size: 13mm (L) x 24mm x 10mm(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Ratchet Propelled Twin Piston Cartridge Mixing Gun
(Suitable for 50ml Dual Cartridges, 1:1 & 2:1 Ratio)
The DCT-DG8050-11 Ratchet Propelled Twin Piston Cartridge Mixing Gun is specially designed for 50ml 1:1 and 2:1 dual component dispensing cartridges of MMA, Acrylic Cement, Epoxy, or PU. Its heavy duty housing is constructed from high impact light-weight plastic for durability and easy portability, and its twin pistons are designed to provide an even and reliable flow for consistent and precise dispensing.
As a manual, no-mess, easy clean-up solution to 2 component dispensing, the DCT-DG8050-11 demonstrates reduced extrusion resistance and is well suited for many assembly operations in a wide sector of markets, including aerospace, electronics, construction, and automotive.
(0 reviews) -
Dispensing, Caulking & Sausage GunsCHEMTOOLS Ratchet Propelled Twin Piston Cartridge Mixing Gun
(Suitable for 50ml Dual Cartridges, 10:1 Ratio)
The DCT-DG8050-110 Ratchet Propelled Twin Piston Cartridge Mixing Gun is specially designed for 50ml 10:1 dual component dispensing cartridges of MMA, Acrylic Cement, Epoxy, or PU. Its heavy duty housing is constructed from high impact light-weight plastic for durability and easy portability, and its twin pistons are designed to provide an even and reliable flow for consistent and precise dispensing.
As a manual, no-mess, easy clean-up solution to 2 component dispensing, the DCT-DG8050-110 demonstrates reduced extrusion resistance and is well suited for many assembly operations in a wide sector of markets, including aerospace, electronics, construction, and automotive.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Screen-Kleen M Stencil Cleaner
Screen-Kleen M Stencil Cleaner
Screen-Kleen M Stencil Cleaner is an effective and economical solvent blend, formulated to be completely compatible with all commonly used solder pastes. It offers a fast evaporation rate, and dries without leaving any residue.
Unlike other hand applied stencil cleaners, Screen-Kleen M helps to reduce solder paste dry-out while enhancing its release from even the finest apertures. This extends the on-screen life of the solder paste, allowing for a greater number of prints between cleaning.
Screen-Kleen M is chlorine-free and free of halogenated solvents. Its use will reduce the risk of print defects, such as smears and bridging, without interfering with the soldering process.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Production & ReworkCHEMTOOLS Solder Wick/Braid – No Clean
Solder Wick, also known as ‘Solder Braid’ or ‘Desoldering Wick’, is RoHS compliant and can be used with leaded and lead free rework. It is used most often in the rework and repair of circuit boards within computers, cell phones, or other electronics. It allows the user to remove excess solder from components or pads on the circuit board without leaving any residues behind. Chemtools Solder Wick products maximise thermal conduction and solder retention.
Solder Wick is made with an oxide-free copper braided into a weave configuration. Immediately after braiding, the wick is cleaned in an environmentally friendly process. Every precaution is taken to ensure that the braid remains oxide-free until it is coated through a proprietary fluxing process using pure type ‘R’ resin flux conforming to all the requirements of Mil-F14256F, Type ‘R’, as well as ANSI/J-STD-004.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Spray, Pump & Dispensing BottlesCHEMTOOLS Solvent Needle Dispensing Bottle
Small, portable toolbox size. Squeezable, but spill-proof. Fine, blunt, stainless steel needle adapter eliminates messy spillage, including waste and evaporation.
Great for fluxes, glues, or solvents on the go. Raised measurement markings from 10cc to 50cc. Includes needle and cap.
Specifications
- Bottle Height (incl. lid): 87mm
- Total Height (incl. needle): 145mm
- Bottle Diameter: 35mm
(0 reviews) -
Marking, Tagging & AccessoriesCHEMTOOLS Spot It Survey & Spot Marking Paint
Spot It Survey & Spot Marking Paint is designed to withstand the harshest of weather conditions. It contains a special resin and pigment system to provide long-term durability, and can be used on timber, steel, concrete, asphalt, brick, soil, turf, and more.
Designed for optimum performance, Spot It can be used for long periods without clogging, while providing the best quality paint in terms of colour visibility, retention, and durability, leaving a lasting mark on surfaces for up to six months*.
*Note: Visibility varies with traffic and exposure
Features & Benefits:
– Touch dry in 5 minutes
– Marking is visible for up to 6 mths
– Non-freezing (operational to -10°C)
– No added lead or chlorinated solvents
– Non-clogging can empties completely
– High delivery for faster and better coverage
– Designed for inverted use(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Marking, Tagging & AccessoriesCHEMTOOLS Spot It Survey & Spot Marking Paint (Fluro Colours)
Spot It Survey & Spot Marking Paint is designed to withstand the harshest of weather conditions. It contains a special resin and pigment system to provide long-term durability, and can be used on timber, steel, concrete, asphalt, brick, soil, turf, and more.
Designed for optimum performance, Spot It can be used for long periods without clogging, while providing the best quality paint in terms of colour visibility, retention, and durability, leaving a lasting mark on surfaces for up to six months*.
*Note: Visibility varies with traffic and exposure
Features & Benefits:
– Touch dry in 5 minutes
– Marking is visible for up to 6 mths
– Non-freezing (operational to -10°C)
– No added lead or chlorinated solvents
– Non-clogging can empties completely
– High delivery for faster and better coverage
– Designed for inverted use(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Tap-N-Cool Semi-Synthetic Soluble Cutting Fluid
Tap-N-Cool Semi-Synthetic Soluble Cutting Fluid
Tap-N-Cool Semi-Synthetic Soluble Cutting Fluid is a proven, new generation heavy duty oil-based metalworking coolant which offers enhanced performance and high lubrication and corrosion inhibition. It contains extreme pressure additives and a highly effective biocide package to ensure the in-use emulsion resists forming bacteria and fungus, thereby reducing spoilage and odours.
SYFO is free flowing for rapid dissipation of heat, and offers outstanding performance in difficult machinery and grinding operations involving hard-to-work metals such as stainless steel, tool steels, and high nickel alloys. It is suitable for a wide range of non-hazardous operations where sump life can be improved in comparison to more conventional soluble oils.
Semi-Synthetic Soluble Cutting Fluid is formulated to maximise tool life, maintain a rust-free environment for tools and finished parts, and provide an excellent surface finish on both ferrous and non-ferrous metals.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Tap-N-Cool Soluble Cutting Fluid – EP
Tap-N-Cool Soluble Cutting Fluid – EP
Tap-N-Cool Soluble Cutting Fluid – EP is a heavy duty, bio-stable metalworking and grinding fluid mixed with water for highly efficient cooling. Its non-staining, extreme pressure formula consists of solvent refined mineral oils and specialised additives, including a long lasting, highly effective biocide package. This unique blend ensures the in-use emulsion resists forming bacteria and fungus, thereby reducing spoilage and odours.
SCFO replaces straight oils and offers excellent lubrication and corrosion inhibition to maintain a rust-free environment for machine tools and finished parts. It has been developed to provide an excellent finish on hard-to-work metals such as stainless steel, tool steels, and high nickel alloys, and is suited to high pressure cutting and grinding, along with other metalworking operations.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Tap-N-Cool Soluble Cutting Fluid – GP
Tap-N-Cool Soluble Cutting Fluid – GP
Tap-N-Cool Soluble Cutting Fluid – GP is a medium duty, non-staining blend of solvent refined mineral oils and specialised additives for extreme pressure protection. Its long-lasting lubricating formula boasts a highly effective biocide package to ensure the in-use emulsion resists forming bacteria and fungus, thereby reducing spoilage and odours.
SCGO provides an excellent finish on a wide variety of metals, offering good corrosion inhibition to maintain a rust-free environment for machine tools and finished parts. It remains highly stable when diluted – even when mixed with hard water up to 400ppm, while its application range extends to high speed machines where the primary requirements are cooling and surface finish.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Tap-N-Cool Straight Cutting Compound
Tap-N-Cool Straight Cutting Compound
Tap-N-Cool Straight Cutting Compound is a soft, non-staining, metal working paste with long lasting high performance, high film strength, and extreme pressure (EP) additives. Its anti-corrosive, anti-wear formula rapidly reduces and dissipates heat without producing noxious fumes, while improving the dimensional stability of all metal surfaces, inclusive of yellow metals.
SCC is formulated from solvent refined mineral oils for an unsurpassable finish. Its lanolin-base ensure a rust-free environment to extend the life of hand tools and heavy duty power tools.
Straight Cutting Compound is non-toxic and biodegradable, making it safe for both the user and the environment.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Tap-N-Cool Straight Cutting Fluid
Tap-N-Cool Straight Cutting Fluid
Tap-N-Cool Straight Cutting Fluid is a high performance, light to medium duty neat oil containing solvent refined mineral oils and extreme pressure (EP) additives. It provides an excellent surface finish with great anti-wear properties and high corrosion inhibition for a rust-free environment – essential for maximising the life of machine tools and finished parts.
SCF is formulated with specialised functional chemistry to minimise misting, and is free flowing for rapid dissipation of heat from metal removal and forming operations. It is non-flammable, non-staining, and recommended for all metal types, both ferrous and non-ferrous.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Production & ReworkCHEMTOOLS TC-2 Tip Tinner
TC-2 Tip Tinner is a highly active, high strength tinner for use when soldering tip plating has oxidised, turned black, and become unusable. It is commonly used for solder tip tinning and cleaning in most electronic manufacturing and repair facilities.
TC-2 is conveniently packaged in a round metal container and comes with a double sided foam adhesive pad on the underside.
(0 reviews) -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ CARBOVOLT Carbon Conductive Grease
Thermalle™ CARBOVOLT Carbon Conductive Grease
Thermalle™ CARBOVOLT Carbon Conductive Grease is formulated with a carbon-based additive to provide excellent conductivity and lubrication. It is an economical low-cost mechanical and thermal conductor for irregular or pitted surfaces and loose or vibrating parts. CARBOVOLT will protect closed switches from corrosion, prevent the formation of oxides, sulphides, and other corroding deposits on copper and aluminium surfaces, improve the connection between worn contacts and non-moving mating surfaces, and reduce arcing hot spots.
CARBOVOLT relies on a proprietary carbon filler rather than traditional metallic particles for electrical conductivity. It is typically used as a ground and is particularly useful when trying to drain static electricity away from moving objects, from low micro-power electronics through to high voltage switchgear.
Non-hardening and non-melting with a high resistance to water washout, CARBOVOLT offers a board service temperature range with continuing lubrication, and low bleed and evaporation. It is ideal for ground connections, rotating connections, rotary switches, variable capacitors, roller inductors, roller bearings, slip rings, slide connectors, and potentiometers.
CARBOVOLT is commonly used in the electronics, automotive, and aerospace industries.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ CERAMIC Silicone-Free Thermally Conductive Grease (Heatsink Compound)
Thermalle™ CERAMIC Silicone-Free Thermally Conductive Grease (Heatsink Compound)
Thermalle™ CERAMIC Silicone-Free Thermally Conductive Grease is a non-flowing ceramic-filled compound specially designed for high powered CPU’s, heavy heatsinks, and any other demanding cooling applications. It is a non-reactive paste which offers non-electrical, high thermal conductivity and low thermal resistance in a soft, low creep, low bleed consistency. Heat transfer from semiconductor housings to heatsinks increase by over 50% when applied, offering the economical benefit of a longer service life for components.
CERAMIC has low toxicity, is easy to apply, and is compatible across a wide operating temperature range. It is commonly used on diodes, transistors, heatsinks, semiconductors, thermostats, power resistors, and radiators, and is suitable for use in many other applications requiring an increase in heat transfer.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ CONDUSIL Silver Electrically Conductive Grease
Thermalle™ CONDUSIL Silver Electrically Conductive Grease
Thermalle™ CONDUSIL Silver Electrically Conductive Grease is formulated with pure silver-based additives to provide excellent electrical conductivity for high performance. Containing no graphite or mercury, it reduces resistance and eliminates hot spots in hinge joints and knife blade switches caused by poor contact.
CONDUSIL has high lubricity and prevents galling while protecting against moisture intrusion and resisting the build-up of corrosion across a wide operating temperature range. It is compatible with metals, plastics, and rubbers, and ideal for preventing data errors and power interruptions in ignition systems, RF transformers, switches, sliding contacts, and many other electrical connections.
CONDUSIL is commonly used in the electronics, automotive, and aerospace industries.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ ELECTRASEAL-COPPER Electrical Jointing Compound
Thermalle™ ELECTRASEAL-COPPER Electrical Jointing Compound
Thermalle™ ELECTRASEAL-COPPER Electrical Jointing Compound is a no-set, no-flow, non-drying pliable compound for improving electrical connections between copper conductors. It provides excellent, reliable, and long-lasting electrical conductivity, corrosion protection from oxidation, and high resistance to water, moisture, dust, and other negative environmental factors.
ELECTRASEAL-COPPER is formulated with a solvent refined mineral oil base and is non-flammable and non-toxic. It is ideal for use in a wide range of applications including power distribution systems, telecommunication networks, underground cabling, electrical equipment and components, and many other industrial installations.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ ELECTRASEAL-NICKEL Electrical Jointing Compound
Thermalle™ ELECTRASEAL-NICKEL Electrical Jointing Compound
Thermalle™ ELECTRASEAL-NICKEL Electrical Jointing Compound is a high quality no-set, no-flow, non-drying compound formulated for use on aluminium-to-aluminium and aluminium-to-copper pad-to-pad or palm-to-palm joints. It has a mineral oil base and remains pliable, even at low temperatures, allowing for easy joint disassembly and reassembly.
ELECTRASEAL-NICKEL is formulated with highly conductive materials that ensure low resistance electrical connections continue with excellent conductivity. It is water resistant and will stop corrosion from forming when in the presence of moisture caused by environmental factors.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ ELECTRASEAL-ZINC Electrical Jointing Compound
Thermalle™ ELECTRASEAL-ZINC Electrical Jointing Compound
Thermalle™ ELECTRASEAL-ZINC Electrical Jointing Compound is a high quality no-set, no-flow, non-drying compound formulated for use on aluminium-to-aluminium and aluminium-to-copper bolted and compression settings. It has a mineral oil base and remains pliable, even at low temperatures, allowing for easy joint disassembly and reassembly.
ELECTRASEAL-ZINC is formulated with highly conductive materials that ensure low resistance electrical connections continue with excellent conductivity. It is water resistant and will stop corrosion from forming when in the presence of moisture caused by environmental factors.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
TapesCHEMTOOLS Thermalle™ HEATFLEX High Temperature Polyimide Tape
Thermalle™ HEATFLEX High Temperature Polyimide Tape
Thermalle™ HEATFLEX High Temperature Polyimide Tape, made from polyimide film and a cross-linked silicone adhesive, is radiation, flame, solvent, acid, moisture, and heat resistant, and designed for both permanent and temporary bonding. It offers excellent electrical and thermal insulation in demanding environments, and features an exceptionally thin backing that leaves no residue or stain upon removal.
HEATFLEX resists punctures, abrasion, and tearing, and is suitable for use in a vaccum environment. It has minimal shrinkage after baking, high vibration resistance, and unique mechanical properties, including a wide temperature range and high dielectric strength.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ OXYGUARD Non-Flammable Oxygen Safe Grease with PFPE
Thermalle™ OXYGUARD Non-Flammable Oxygen Safe Grease with PFPE
Thermalle™ OXYGUARD Non-Flammable Oxygen Safe Grease with PFPE is a medium viscosity perfluorinated polyether base oil, thickened with PTFE for exceptional thermal stability and chemical resistance. It is a premium formulation offering extreme long-term lubrication, sealing, and anti-wear properties for the most aggressive chemical and gas applications.
OXYGUARD is suitable for high pressure air, nitrous oxide, and oxygen (gas and liquid) systems with no fear of combustion. It is physically and chemically inert, totally resistant to water and all common chemicals, resistant to oxidation and thermal degradation, and compatible with metals, plastics, and elastomers.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ SILVER-FROST Silver Thermally Conductive Grease (Heatsink Compound)
Thermalle™ SILVER-FROST Silver Thermally Conductive Grease (Heatsink Compound)
Thermalle™ SILVER-FROST Silver Thermally Conductive Grease is an exceptional thermal interface paste which greatly amplifies conductivity in applications with small voids or uneven surfaces. It is a premium, highly reliable and stable material which has been specially formulated for efficient heat transfer and the prevention of current leakage. SILVER-FROST is non-flowing and silicone-free with low bleed paste and a high concentration of silver particles and other proprietary fillers that offer improved conductivity by occupying and sealing voids between mating surfaces.
SILVER-FROST dissipates heat efficiently and effectively to reduce overheating and component failure across a wide operating temperature range. It offers versatility in its suitability to both sensitive medical devices through to complicated automotive, aerospace, and defence equipment. Compatibility also includes CPU and GPU cooling, LED lighting, motors, transformers, and general industrial electronics.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ SUB-ZERO Silicone Thermally Conductive Grease (Heatsink Compound)
Thermalle™ SUB-ZERO Silicone Thermally Conductive Grease (Heatsink Compound)
Thermalle™ SUB-ZERO Silicone Thermally Conductive Grease is a high-performance non-flowing thermal interface material for use in electronic applications that require efficient heat transfer without concern of corroding elements. It is formulated with a silicone base and high-quality thermally conductive fillers to provide excellent conductivity and stability over a wide temperature range across all heat generating devices.
SUB-ZERO is a non-corrosive viscous paste displaying low bleed for long lasting performance and suitability across a wide range of materials. It is commonly used in computer processors, graphics cards, power supplies, and lighting systems, and can be found in the automotive industry applied to engine control units, power steering systems, and transmission control modules.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ TEF-EASE Dielectric Dissimilar Metals Anti-Corrosion & Anti-Seizing Gel
Thermalle™ TEF-EASE Dielectric Dissimilar Metals Anti-Corrosion & Anti-Seizing Gel
Thermalle™ TEF-EASE Dielectric Dissimilar Metals Anti-Corrosion & Anti-Seizing Gel is a pure synthetic grease with no silica, petroleum additives or volatile solvents. It contains sub-micron sized PTFE particles for corrosion prevention and resistance to seizure and galling.
With excellent electrical insulation and protection through its dielectric properties, TEF-EASE can be used on dissimilar metals across a wide temperature range without curing or melting. It is completely waterproof and resists wash-out in both salt and fresh water, performing perfectly under extreme pressures and high loads.
TEF-EASE adheres well to surfaces, ensuring long-lasting lubrication and prevention of metal-to-metal contact. It is also compatible with most plastics and rubbers.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ TEF-GLIDE Electrical & Automotive White Lithium Grease
Thermalle™ TEF-GLIDE Electrical & Automotive White Lithium Grease
Thermalle™ TEF-GLIDE Electrical & Automotive White Lithium Grease is a premium multi-purpose lithium-based grease offering excellent lubrication and superior wear protection for a variety of uses across many industries, although more commonly found inside an auto-mechanic’s tool kit. It resists water and protects from corrosion, and with a high drop point, remains smooth and buttery under a wide operating temperature range.
Fortified with PTFE for enhanced lubricity and reliable performance, TEF-GLIDE is compatible with most metals and plastics and is ideal for sliding tracks, bearings, hinges, and locks. Non-toxic and environmentally safe, it is suitable for use outdoors on garden and farming machinery and marine equipment under most environmental conditions.
TEF-GLIDE is highly recommended for corrosion prevention on battery terminals and metal surfaces.(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ VACUSEAL Silicone-Free High Vacuum Grease
Thermalle™ VACUSEAL Silicone-Free High Vacuum Grease
Thermalle™ VACUSEAL Silicone-Free High Vacuum Grease is a high-quality, non-toxic lubricant formulated specifically for use in vacuum systems. It is a good general purpose hydrocarbon grease that contains microparticles of PTFE and is compatible with most metal, plastic, and elastomer system components, being free of silicone, halogens, and heavy metals.
VACUSEAL provides needed lubrication and sealing of o-rings, gaskets, and valves, and is resistant to oxidation and thermal degradation at temperatures below 30°C.
Note: Due to its hydrocarbon content, VACUSEAL is not compatible with rubber, PVC, EPDM, and EPR seals.
NOTE: VACUSEAL is NOT recommended for any product that may warm to or exceed 30°C. For applications with higher temperatures, it is recommended to use VACUSEAL PLUS, a silicone-based high vacuum grease for temperatures up to 260°C (Part No. CT-TM012 – Available in all sizes mentioned above).
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ VACUSEAL-PLUS Silicone High Vacuum Grease
Thermalle™ VACUSEAL-PLUS Silicone High Vacuum Grease
Thermalle™ VACUSEAL-PLUS Silicone High Vacuum Grease is a high-quality lubricant for use in pressure and vacuum units up to 10-6 millibars, to reduce leakage by filling gaps and lowering permeation rates. Its silicone base ensures resistance to oxidation and thermal degradation, and contains no additives that react negatively with system components.
VACUSEAL-PLUS lubricates and seals metals, plastics, and elastomers, including o-rings, gaskets, taps, and plug and control valves, and offers high lubricity for sliding and rolling bearings and gears in pumps and compressors under wide and high temperature conditions. It performs well as an anti-seize for glass components while protecting from water ingress, corrosion formation, and most chemical intrusions.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chemicals, Lubricants & AdhesivesCHEMTOOLS Thermalle™ VOLTGUARD Electrician’s Dielectric Grease
Thermalle™ VOLTGUARD Electrician’s Dielectric Grease
Thermalle™ VOLTGUARD Electrician’s Dielectric Grease is a premium, non-toxic silicone-based grease that provides superior electrical insulation, excellent lubrication and water resistance, and high corrosion protection in a wide range of applications. It is non-curing, non-melting, and formulated to withstand extreme temperatures and harsh environments, with an operating range of -50°C to 200°C.
Compatible with most plastics and rubbers, and suitable for use around o-rings and seals, VOLTGUARD is commonly applied to bulbs and connectors (see below), spark plug boots, battery terminals, automotive ignition systems, electrical switches, and more.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Twist Lock Helical Static Mixing Nozzle
(10:1 Ratio, Suitable for 50ml Dual Cartridges)
The Twist Lock Helical Static Mixing Nozzle contains 24 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The smooth, tapered nozzle allows for dispensing directly onto surfaces to be glued, while its rounded shape ensures an easy fit into tight spaces.
The spiralling/bow-tie elements of the inner core repeatedly divide and combine both materials in a circular flow to provide consistent, high quality intermixing, effectively channelling the material radially from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-TL-50 is specially designed for use with most 10:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews) -
Mixing Nozzles & Dispensing TipsCHEMTOOLS Twist Lock Helical Static Mixing Nozzle
(1:1 Ratio, Suitable for 25ml & 50ml Dual Cartridges)
The Twist Lock Helical Static Mixing Nozzle contains 16 heavy duty polypropylene mixing elements within the shaft to ensure a perfect mix of both components. The tapered and stepped Quadro square nozzle allows for dispensing directly onto surfaces to be glued, or, for larger beads, it may be cut to suit the size of the bead required. A luer lock needle tip may also be added for dispensing into tight spaces, or when smaller beads are required.
The square geometry of the inner core consists of a series of alternating left- and right-hand elements with intermittent flow inverters. These provide consistent, high quality mixing, effectively channelling the material from the walls into the center of the mixer, and from the center out to the walls.
8-MXN-TL-25 is specially designed for use with most 1:1 two-part/dual component cartridges. The used nozzle may be left on the cartridge between uses to provide a tight seal and protect from exposure to air and humidity once the material within the shaft cures.
(0 reviews)