Shop
Showing 8713–8748 of 10198 results
-
BurrsSABER Burrs Express Cut Tree Radius Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Ball
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Cylindrical with Ball Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Included Angle
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Non-Ferrous Cut Tree Radius Nose
- Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.
- Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as aluminium, brass, copper, bronze, coarse plastic, hard rubber, reinforced plastic and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinksSABER Countersink HSS Triple Flute Hex Shank
- Specifically engineered for use in impact drivers these bits are also fully compatible with conventional rotary drills.
- 1/4″ hex shank facilitates fast tool loading in cordless impact drivers and quick change adaptors.
- For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on medium to hard materials.
- Resharpenable.
- Manufactured from premium quality high speed steel for long service life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinksSABER Countersink HSS Triple Flute Hex Shank Set
- Saber HSS Countersink Triple Flute 90 Deg. Bright Hex Shank Set
- Specifically engineered for use in impact drivers these bits are also fully compatible with conventional rotary drills.
- 1/4″ hex shank facilitates fast tool loading in cordless impact drivers and quick change adaptors.
- For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on medium to hard materials.
- Resharpenable.
- Manufactured from premium quality high speed steel for long service life.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinksSABER Countersinks Essentials Countersink Sets
- For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals
- The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on medium to hard materials.
- Resharpenable.
- HSS-Co5 (Cobalt) countersinks are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinksSABER Countersinks HSS-Co5 (Cobalt) Cross Hole Round Shank
- For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The intersection of the hole and cone form the cutting edge on the tool.
- The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
- If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
- This clearance is referred to as cutting relief.
- The radially relieved single cutting edge provides fast stock removal with low vibration for chatter-free operation ensuring the smoothest finish.
- These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons.
- They also may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
- HSS-Co5 (Cobalt) countersinks are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinksSABER Countersinks HSS-Co5 (Cobalt) Cross Hole Round Shank Set
- Saber HSS-Co5 (Cobalt) TiN Coated Cross Hole Round Shank 90 Deg. Countersink Set
- For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The intersection of the hole and cone form the cutting edge on the tool.
- The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
- If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
- This clearance is referred to as cutting relief.
- The radially relieved single cutting edge provides fast stock removal with low vibration for chatter-free operation ensuring the smoothest finish.
- These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons.
- They also may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
- HSS-Co5 (Cobalt) countersinks are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinksSABER Countersinks HSS-Co5 (Cobalt) Triple Flute Round Shank
- For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals
- The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on medium to hard materials.
- Resharpenable.
- HSS-Co5 (Cobalt) countersinks are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
CountersinksSABER Countersinks HSS-Co5 (Cobalt) Triple Flute Round Shank Set
- For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals
- The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on medium to hard materials.
- Resharpenable.
- HSS-Co5 (Cobalt) countersinks are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
- Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Diamond Hole Saw
- Diamond core drills and hole saws require the use of proper lubrication, correct drill speed and proper pressure.
- Drilling methods and techniques vary significantly depending upon the material being drilled.
- To achive optimum cutting performance and maximum core drill life use a slow to very slow drill speed, low drill pressure, and plenty of water for lubrication.
- Variable speed drills work best since the correct speed can be selected.
- Diamond core drills only drill out a portion of the resulting hole so they drill much faster than conventional blunt nose drills.
- Core drills can be used on most non-ferrous hard materials such as glass, ceramic, porcelain, fibreglass, slate, marble, granite and other natural and manufactured stone materials.
- The life of any type of diamond drill depends upon the hardness, abrasiveness and thickness of the material being drilled and the specific drilling techniques used.
- Using diamond core drills in hard materials is not difficult, however drilling the hole takes time.
- You should consider that they aren’t “drilling” a hole – they are “grinding” a hole.
- SPEEDS IN RPM: Fibreglass – 1200, Glass, Ceramic and China – 800, Limestone and Marble – 600, Ceramic Tile – 600, Porcelain – 500, Granite and Comp. Stone – 400.
- DO NOT USE HAMMER ACTION.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
SetsSABER Drill & Tap Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Hole Saw Kits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS TiN Coated Jobber DrillsSABER HSS TiN Coated Jobber Drills Fractional
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
- As with all surface coated tools, performance will deteriorate after resharpening.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS TiN Coated Jobber Drills
SABER HSS TiN Coated Jobber Drills Fractional Sets
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
- As with all surface coated tools, performance will deteriorate after resharpening.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS TiN Coated Jobber Drills
SABER HSS TiN Coated Jobber Drills Metric
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
- As with all surface coated tools, performance will deteriorate after resharpening.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS TiN Coated Jobber Drills
SABER HSS TiN Coated Jobber Drills Metric Sets
- 135° Split Point (crankshaft point).
- Split point is self centering and the short distance from the drill axis to the outer corners results in faster penetration, reducing end thrust.
- The 135° point should be used to cut harder steel materials especially in deep hole applications.
- In these situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
- As with all surface coated tools, performance will deteriorate after resharpening.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS TiN Coated Panel DrillsSABER HSS TiN Coated Panel Drills Double Ended
- 135° Split Point (crankshaft point)
- Split point is self centering reducing the need for end thrust.
- The 135° point provides superior performance when drilling harder steel materials.
- In most situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS TiN Coated Panel DrillsSABER HSS TiN Coated Panel Drills Single Ended
- 135° Split Point (crankshaft point)
- Split point is self centering reducing the need for end thrust.
- The 135° point provides superior performance when drilling harder steel materials.
- In most situations it will produce thicker chips minimising work hardening of the cavity.
- Faster penetration reduces abrasion and friction along the cutting edges.
- Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
- The coating higher speed and feed rates can be achieved and tool life is greatly increased.
- The TiN coating is achieved by Physical Vapour Deposition (PVD).
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS-Co5 (Cobalt) Jobber DrillsSABER HSS-Co5 (Cobalt) Jobber Drills Fractional Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS-Co5 (Cobalt) Jobber Drills
Saber HSS-Co5 (Cobalt) Jobber Drills Metric Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsSABER Quick Change Mandrel
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Step DrillsSABER Step Drills Essential HSS TiN Coated Spiral Flute
- Saber step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- 1/4″ hex shank for fast tool changing in impact drivers and quick change adaptors.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- Manufactured from premium quality high speed steel with double fluted ground cutting edges for long service life.
- No pilot hole required.
- Easy to sharpen.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- Spiral flutes enable easier tool penetration.
- TiN coating extends tool life, helps to dissipate heat, reduces friction and cold welding.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Step DrillsSABER Step Drills Essential HSS TiN Coated Spiral Flute Set
- Saber Essential HSS TiN Coated Spiral Flute Step Drill Set – Metric
- Saber step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- 1/4″ hex shank for fast tool changing in impact drivers and quick change adaptors.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- Manufactured from premium quality high speed steel with double fluted ground cutting edges for long service life.
- No pilot hole required.
- Easy to sharpen.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- Spiral flutes enable easier tool penetration.
- TiN coating extends tool life, helps to dissipate heat, reduces friction and cold welding.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Step DrillsSABER Step Drills HSS Spiral Flute Hex Shank
- Saber step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- 1/4″ hex shank for fast tool changing in impact drivers and quick change adaptors.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- Manufactured from premium quality high speed steel with double fluted ground cutting edges for long service life.
- No pilot hole required.
- Easy to sharpen.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- Spiral flutes enable easier tool penetration.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Step DrillsSABER Step Drills HSS Spiral Flute Hex Shank Set
- Saber HSS Spiral Flute Hex Shank Step Drill Set – Metric
- Saber step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- 1/4″ hex shank for fast tool changing in impact drivers and quick change adaptors.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- Manufactured from premium quality high speed steel with double fluted ground cutting edges for long service life.
- No pilot hole required.
- Easy to sharpen.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- Spiral flutes enable easier tool penetration.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Step DrillsSABER Step Drills HSS TiN Coated Straight Flute
- Saber step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- Manufactured from premium quality high speed steel with double fluted ground cutting edges for long service life.
- No pilot hole required.
- Easy to sharpen.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- TiN coating extends tool life, helps to dissipate heat, reduces friction and cold welding.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Step DrillsSABER Step Drills HSS TiN Coated Straight Flute Set
- Saber HSS TiN Coated Straight Flute Step Drill Set – Metric
- Saber step drills are ideal for electrical contractors, sheetmetal workers and auto mechanics.
- Step drills are designed for drilling repetitive holes in steel, stainless steel, copper, brass, aluminium, plastic, plexiglas, laminates and many other thin materials.
- Manufactured from premium quality high speed steel with double fluted ground cutting edges for long service life.
- No pilot hole required.
- Easy to sharpen.
- Stepless drilling in the thinnest sheets.
- Burr-free drilling without sheet deformation.
- Automatic deburring.
- TiN coating extends tool life, helps to dissipate heat, reduces friction and cold welding.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
SetsSABER Tap & Die Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Accessories
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Cargo Nets
Convenience and durability go hand in hand with Safeguard Cargo Nets.
Made from UV-stabilized webbing and mesh that won’t tangle, these nets are effortless! With multiple anchor points, a load rating of 1000kg, 6 straps and the option to add more straps to increase the load rating. These nets are perfect for utes, trailers, trucks, boats and to name a few.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Containment Nets
The Safeguard Containment Nets, designed for light and medium-duty tray-back utes, trucks, trailers, and boats, safely secure items. To achieve a 250kg load rating, four (x4) SSH-100 Safeguard cargo straps need to be added.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Load CoversSAFEGUARD Multipurpose Nets
Perfect for many vehicle types. The Multipurpose Cargo Nets come in two kinds – a net type, and a weatherproof type. Loads are assured to be covered and secured as these have a load rating of 500kg.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page