Shop
Showing 8677–8712 of 10198 results
-
Entry & Exit AutomationRICHMOND USB Adaptor To Suit Bluetooth Receiver
USB adaptor to suit GTR130 Bluetooth receiver.
Includes 1 x USB adaptor
(0 reviews) -
Entry & Exit AutomationRICHMOND USB Bluetooth Add-on Receiver
Never worry about losing your gate controller again with our 100% handsfree, wireless accessory. Simply plug the USB transmitter into your car and the receiver into your gate motor and your gates will automatically open and close. Connect and control your gates with this handy accessory!
Up to 340 USB adaptors can be paired to the receiver. Additional adaptors can be purchased separately. Part Number: GTR130A
Includes:
1 x Bluetooth Receiver
2 x USB adaptors
(0 reviews) -
Utility & Service TrolleysRICHMOND Waste Bin for Service Trolleys
Height: – 555mm
Top Dimensions: – 330(W) x 225(L)mm
Base Dimensions: – 285(W) x 150(L)mm
Easily attached to the side of your service trolley, this tapered side bucket allows you to collect rubbish, scraps etc. as you go.
(0 reviews) -
Dual PurposeRICHMOND Wheel Bracket Kit for Dual Purpose Trolleys
This replacement wheel bracket kit is suitable for Richmond’s range of dual purpose trolleys.
(0 reviews) -
Sliding Gate HardwareRICHMOND White Gate Sliding Block
This white nylon sliding gate block allows a sliding gate to be mounted on uneven ground, or on an angle, by sliding up and down a channel while sliding the gate. The dimensions of the block are 74(W) x 62(L) x 76mm(H).
When combined with an aluminium slide block guide channel this sliding block is ideal for mounting a guide for sliding gates that have pickets, wire, or timber slats attached to the front of the gate. They also guide the gate on sloping/uneven ground.
(0 reviews) -
PlatformRICHMOND Wide 6 Wheel Stock Platform Trolley Single Handle
Richmond’s range of 6 wheel stock platform trolleys are perfect for transporting stock around a busy store, produce market, factory or warehouse. These galvanised platform trolleys feature an innovative 6 wheel rocking design that keeps the centre wheel grounded at all times allowing for full 360 degree movement around tight spaces.
Each trolley is made from tough, galvanised steel and is fitted with 200mm rigid (fixed centre) castors and 125mm swivel outer castors. This range has a load capacity of up to 500kg and includes many versatile options including single or twin platform trolleys with single or double handles.
Trolley Weight:Â 32kg
Platform Size:Â 1140mm x 565mm
Platform Height:Â 260mm
Handle Height:Â 950mm
Outer Wheel Size:Â 125mm rebound rubber
Centre Wheel Size:Â 200mm rubber tyred nylon centred
Safe working load:Â 450kg
(0 reviews) -
PlatformRICHMOND Wide 6 Wheel Stock Platform Trolley Twin Handle
Richmond’s range of 6 wheel stock platform trolleys are perfect for transporting stock around a busy store, produce market, factory or warehouse. These galvanised platform trolleys feature an innovative 6 wheel rocking design that keeps the centre wheel grounded at all times allowing for full 360 degree movement around tight spaces.
Each trolley is made from tough, galvanised steel and is fitted with 200mm rigid (fixed centre) castors and 125mm swivel outer castors. This range has a load capacity of up to 500kg and includes many versatile options including single or twin platform trolleys with single or double handles.
Trolley Weight:Â 33kg
Platform Size:Â 1140mm x 565mm
Platform Height:Â 260mm and 650mm
Handle Height:Â 950mm
Outer Wheel Size:Â 125mm rebound rubber
Centre Wheel Size:Â 200mm rubber tyred nylon centred
Safe working load:Â 500kg
(0 reviews) -
PlatformRICHMOND Wide 6 Wheel Stock Trolley Twin Platform Single Handle
Richmond’s range of 6 wheel stock platform trolleys are perfect for transporting stock around a busy store, produce market, factory or warehouse. These galvanised platform trolleys feature an innovative 6 wheel rocking design that keeps the centre wheel grounded at all times allowing for full 360 degree movement around tight spaces.
Each trolley is made from tough, galvanised steel and is fitted with 200mm rigid (fixed centre) castors and 125mm swivel outer castors. This range has a load capacity of up to 500kg and includes many versatile options including single or twin platform trolleys with single or double handles.
Trolley Weight:Â 37kg
Platform Size:Â 1140mm x 565mm
Platform Height:Â 260mm and 650mm
Handle Height:Â 950mm
Outer Wheel Size:Â 125mm rebound rubber
Centre Wheel Size:Â 200mm rubber tyred nylon centred
Safe working load:Â 450kg
(0 reviews) -
PlatformRICHMOND Wide 6 Wheel Stock Trolley Twin Platform Twin Handle
Richmond’s range of 6 wheel stock platform trolleys are perfect for transporting stock around a busy store, produce market, factory or warehouse. These galvanised platform trolleys feature an innovative 6 wheel rocking design that keeps the centre wheel grounded at all times allowing for full 360 degree movement around tight spaces.
Each trolley is made from tough, galvanised steel and is fitted with 200mm rigid (fixed centre) castors and 125mm swivel outer castors. This range has a load capacity of up to 500kg and includes many versatile options including single or twin platform trolleys with single or double handles.
Trolley Weight:Â 38kg
Platform Size:Â 1140mm x 565mm
Platform Height:Â 260mm and 650mm
Handle Height:Â 950mm
Outer Wheel Size:Â 125mm rebound rubber
Centre Wheel Size:Â 200mm rubber tyred nylon centred
Safe working load:Â 500kg
(0 reviews) -
Entry & Exit AutomationRICHMOND WiFi Smart Switch
This smart switch wires into your automatic gate motor or garage door opener and transforms it into a smart device. Connect the switch with the SmartR Home App to control your motor from anywhere using your phone!
Easily convert your gate motor or garage door opener into a smart WiFi opener! Compatible with Richmond automatic gate openers and a wide range of third party motors.
- 2.4 GHz Wi-Fi smart gate switch
- 12-24V DC/AC
- 1 x Position sensor input
- 1 x NO relay output
(0 reviews) -
KeypadsRICHMOND Wireless Gate Keypad
- Set your own passcode to allow secure access to your property
- Wireless operation
- Colour:Â Black/silver
- Frequency:Â 433.92 MHZ
- IP Rating:Â IPX4
- 50m operating range
- Includes 2 x AAA batteries
(0 reviews) -
KeypadsRICHMOND Wireless Gate Keypad
Product Name :Â Wireless Gate Access Control Keypad
Range:Â 5-10m
Batteries Required:Â 3 x AAA
(0 reviews) -
KeypadsRICHMOND Wireless Gate Keypad
- Wireless keypad with clear pastic cover
- Rated to IP54
- 2 x AAA 1.5V batteries
(0 reviews) -
KeypadsRICHMOND Wireless Gate Keypad with Waterproof Cover
- Power Supply:Â DC 6V (4 x AAA batteries).
- Standby Current:Â 18uA (Sleep mode), 6mA (working mode).
- Working Current:Â 28mA (working mode).
- Two channel RF 433MHZ transmitting. HCS301 rolling code.
- IP44 rating. Suitable for outdoor use.
(0 reviews) -
Entry & Exit AutomationRICHMOND Wireless Vehicle Detection System – Micro e-Loop
Designed to be to be easily integrated into any gate system: the e-Loop micro is the perfect product for any gate installer. The e-loop micro offers cost effective exit automation with quick and easy installation.
- Up to 25m range
- Includes a CR123a battery with a lifespan of up to 2 years
- Ultra compact design
- Compact Diameter of ~110mm
- Includes a e-Trans 20 transceiver for quick connection to your gate motor
- High security 128-Bit AES Encryption
- Quick Non-Permanent Installation
- Set-and-Forget auto calibration
- Available in Exit mode
- 2500kg maximum capacity
This accessory is compatible with all Richmond gate openers.
(0 reviews) -
Entry & Exit AutomationRICHMOND Wireless Vehicle Detection System – Mini e-Loop
The e-Loop Mini replaces traditional wired inductive loops, entry and exit ground wands, saving you time and money while increasing reliability.
The e-Loop Mini is perfect for domestic applications.
Features:
- Quick and easy installation
- Small compact design (120mm (L) x 120mm (W) x 30mm (H)
- 2500kg Static load capacity
- Uses standard 1.5V AA Lithium batteries providing up to 3 years battery life
- High security 128-bit encryption
- Range up to 30m
This accessory is compatible with all Richmond gate openers.
(0 reviews) -
Log BooksRide On Mower Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Log Books
Rigid Tray Truck Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Medical InstrumentsRing Cutter
Ring Cutter stainless steel pro model to use in first aid rooms and hospitals.
- Precision ring cutter can cut through rings and other jewelry worn tight to the skin without fear of harm
- Metal clasp shields blade from the skin
- Serrated circular blade makes cutting quick and easy
- An essential emergency tool that quickly removes rings from fingers.
- Stainless steel handle with safety lever slides protective plate between finger and ring.
- Large thumb screw operates a razor-sharp serrated saw
(0 reviews) -
Log Books
Roller Compaction Safety Check Logbook
A5 SIZE.
DAILY PRE START & AFTER START CHECKS.
12 MONTHS RECORDING, 7 DAYS PER WEEK.
FAULT REPORTING.
SERVICING DETAILS.
PREFERRED SERVICE PROVIDERS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET.
(0 reviews) -
Log Books
Roller Door Safety Check Logbook
DL SIZE. (210mm x 100mm)
DAILY PRE START & AFTER START SAFETY CHECKS.
12 MONTHS RECORDING, 7 DAYS A WEEK.
FAULT REPORTING & SERVICE DETAILS.
SUPPLIED IN A RESEALABLE PLASTIC POCKET
(0 reviews) -
HSS Bright Jobber DrillsSABER Bright Finish HSS Jobber Drill Fractional
- 135° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS Bright Jobber Drills
SABER Bright Finish HSS Jobber Drill Fractional Sets
- 135° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS Bright Jobber Drills
SABER Bright Finish HSS Jobber Drill Metric
- 135° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS Bright Jobber Drills
SABER Bright Finish HSS Jobber Drill Metric Sets
- 135° Split Point (crankshaft point).
- Split point is self centering and reduces the need for end thrust. Friction at workpiece is reduced.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Ball
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Cylindrical
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Cylindrical Ball Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Burrs
SABER Burrs Express Cut Cylindrical with End Cut
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Flame
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Included Angle
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Oval
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Pointed Cone
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Sets
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
BurrsSABER Burrs Express Cut Tree Pointed Nose
- Express Cut Burrs (also referred to as Double Cut Burrs) are general purpose burrs designed for rapid stock removal and improved operator control.
- Chip size is reduced and lower tool speeds can be used compared with standard cut burrs.
- Ideal for use in carbon steel, cast iron, high strength steel, stainless steel, steel castings, steel welds, titanium alloy and fibreglass composite.
- Harder materials require slower running speeds.
- Smaller burrs require faster running speeds.
- Long shank burrs require slower speeds for safety reasons.
- Apply constant movement and light pressure when using the burr.
- Running below the optimum speed will cause chipping.
- Running above optimum speed will cause premature tooth wear.
- Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank.
- Using tools and collets which have become worn will cause chipping.
- Do not sink the burr for more than one third of its periphery.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page
