Shop
Showing 649–684 of 11010 results
-
CountersinkBORDO HSS Co5 TiN Coated Single Flute 90° Countersink Set
- 5 Pc 10-30mm 90 Degree TiN Coated Single Flute Countersink Set
- Single flute countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The fluted countersink cutter is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on light to medium materials.
- Resharpenable.
- M35 Cobalt High Speed Steel offers increased wear and heat resistance in alloy steels, stainless steels and other abrasive or difficult materials.
- This increases tool life in all production applications.
- Titanium Nitride (TiN) Coated Countersinks have a very hard gold coloured surface finish.
- This coating is only a few microns thick and is achieved by Physical Vapour Deposition (PVD).
- This treatment results in reduced friction, greater heat dissipation and reduced cold welding – which means higher speed and feed rates with greatly increased tool life.
- As with all surface coated tools, performance will deteriorate after resharpening
(0 reviews) -
CountersinkBORDO HSS Co5 TiN Coated Triple Flute 90° Countersink
- Triple flute countersinks are ideal for countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
- The three fluted countersink is self centering with wide flutes and is used to provide a heavy chamfer in the entrance to a drilled hole.
- This may be required to allow the correct seating for a countersunk head screw or to provide the lead in for a second machining operation such as tapping.
- Use on medium to hard materials.
- Resharpenable.
- M35 Cobalt High Speed Steel offers increased wear and heat resistance in alloy steels, stainless steels and other abrasive or difficult materials.
- This increases tool life in all production applications.
- Titanium Nitride (TiN) Coated Countersinks have a very hard gold coloured surface finish.
- This coating is only a few microns thick and is achieved by Physical Vapour Deposition (PVD).
- This treatment results in reduced friction, greater heat dissipation and reduced cold welding – which means higher speed and feed rates with greatly increased tool life.
- As with all surface coated tools, performance will deteriorate after resharpening.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO HSS Cobalt Bi-Metal Hole Saw
- Bordo bi-metal hole saws are premium quality, general purpose saws suitable for a wide variety of materials and applications.
- The high-speed steel cobalt (HSS-Co) cutting edge provides shock resistant teeth and resists tooth strippage.
- 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration.
- 48mm (1-7/8″) depth of cut.
- 5mm (3/16″) thick heavy-duty backing plate eliminates need for drive plate.
- Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas.
- Ideal for plumbing, construction, aircraft, electrical, maintenance, and automotive applications.
- Use in steel, aluminium, brass, cast iron, plastic, wood and a wide variety of other materials.
- Can be used in stainless steel with use of a cutting lubricant, reduced spindle speed and sufficient feed pressure to produce chips.
- Repetition hole cutting in stainless steel is best suited to Bordo XP and XP2 hole saws.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO HSS Cobalt Bi-Metal Hole Saw Kits
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Hole Saws & KitsBORDO HSS Cobalt Bi-Metal Mandrels
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Power-Hex HSSBORDO HSS Drill 1/4 Hex Shank
- Power-Hex HSS 1/4″ hex shank twist drill.
- 118° chisel point with 30° helix.
- Ideal for use with quick change adaptors and bit holders.
- Changing your drill bit is now as easy as swapping between any other 1/4″ hex shank accessory.
- Power-Hex drills are ideal for use with the extensive range of Bordo quick change adaptors, bit holders and quick change extensions.
- Bright Finish Twist Drills have no surface treatment and are supplied in the as-ground condition.
- These tools are suitable for general purpose use, particularly for non-ferrous applications.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO HSS Drill Taps Metric Coarse
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO HSS Drill Taps Sets
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Drill Taps UNC
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Drill Taps UNF
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ToolbitsBORDO HSS Fractional Round
- High Speed Steel Tool Bits are designed for general purpose machining of mild steel, alloys, and tool steels.
- They have good heat and abrasion resistant properties and are best used when making an interrupted cut or where the tool may be subjected to heavy load or shock.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSSBORDO HSS Fractional Square
- High Speed Steel Tool Bits are designed for general purpose machining of mild steel, alloys, and tool steels.
- They have good heat and abrasion resistant properties and are best used when making an interrupted cut or where the tool may be subjected to heavy load or shock.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSSBORDO HSS Hacksaw Blade
- High speed steel (HSS).
- HSS flexible blade for increased wear resistance and superior cutting life.
- Regular pitch standard tooth configuration that produces an efficient cut on all types of materials.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Morse Taper ShankBORDO HSS Morse Taper Shank Drill Fractional
- DIN345.
- Taper Shank Twist Drills have conical shanks suitable for direct fitting into the tapered spindle holes of drill presses and other machines, lathe tailstocks and driving sleeves or sockets.
- This coupling is best described as a male cone within a female cone, and has self-locking and self-centering benefits.
- HSS with 118° notched point suitable for a variety of drilling applications and conditions.
- To achieve optimal performance and extended tool life, suitable lubricating/cutting oils or coolant fluids are recommended for most drilling operations.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Morse Taper Shank
BORDO HSS Morse Taper Shank Drill Metric
- DIN345.
- Taper Shank Twist Drills have conical shanks suitable for direct fitting into the tapered spindle holes of drill presses and other machines, lathe tailstocks and driving sleeves or sockets.
- This coupling is best described as a male cone within a female cone, and has self-locking and self-centering benefits.
- HSS with 118° notched point suitable for a variety of drilling applications and conditions.
- To achieve optimal performance and extended tool life, suitable lubricating/cutting oils or coolant fluids are recommended for most drilling operations.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Power-BoreBORDO HSS Power-Bore Auger Bit
- HSS Power-Bore self feeding auger drill.
- The Bordo range of Power-Bore HSS split point auger bits outperform conventional augers in tough Australian hardwood.
- Hex shank eliminates chuck slip.
- Self feeding HSS threaded split point.
- Outperforms and outlasts conventional augers.
- Extreme performance in tough Australian hardwoods.
- Heavy duty construction for long life – guaranteed!
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & DiesBORDO HSS Tap Brass
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap BSF
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap BSF Left Hand
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap BSW
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap BSW Left Hand
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap Metric Coarse
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap Metric Coarse Left Hand
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap Metric Fine
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap Metric Fine Left Hand
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap NPT
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap Oversize/Galvanising
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap UNC
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap UNC Left Hand
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap UNF
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Taps & Dies
BORDO HSS Tap UNF Left Hand
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
ToolbitsBORDO HSS-Co10 Fractional Bevel
- HSS-Co10 (Cobalt)
- Used to cut off (part) a section or workpiece from a bar being held in a chuck.
- Slightly tapered on both sides from top to bottom to reduce friction when parting.
- Ground with a flat top with some rake to ensure continuous “using up” of the blade.
- Must be used at a right angle to the axis of the lathe.
- Can also be used for grooving.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Toolbits
BORDO HSS-Co10 Fractional Round
- M42 (10% Cobalt) allows shorter cycle times in production environments.
- M42 is also less prone to chipping when used for interrupted cuts.
- Ideal for heavy duty machining of alloy steels and tough materials, such as castings and forgings.
- High heat and abrasion resistant properties and are best used when making heavy cuts, at high speeds and feeds, or where high heat is a factor.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
HSS-Co10
BORDO HSS-Co10 Fractional Square
- M42 (10% Cobalt) allows shorter cycle times in production environments.
- M42 is also less prone to chipping when used for interrupted cuts.
- Ideal for heavy duty machining of alloy steels and tough materials, such as castings and forgings.
- High heat and abrasion resistant properties and are best used when making heavy cuts, at high speeds and feeds, or where high heat is a factor.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Toolbits
BORDO HSS-Co10 Metric Bevel
- 12 x 3 x 90mm HSS Cobalt Parting Off Toolbit
- HSS-Co10 (Cobalt)
- Used to cut off (part) a section or workpiece from a bar being held in a chuck.
- Slightly tapered on both sides from top to bottom to reduce friction when parting.
- Ground with a flat top with some rake to ensure continuous “using up” of the blade.
- Must be used at a right angle to the axis of the lathe.
- Can also be used for grooving.
(0 reviews) -
Toolbits
BORDO HSS-Co10 Metric Round
- M42 (10% Cobalt) allows shorter cycle times in production environments.
- M42 is also less prone to chipping when used for interrupted cuts.
- Ideal for heavy duty machining of alloy steels and tough materials, such as castings and forgings.
- High heat and abrasion resistant properties and are best used when making heavy cuts, at high speeds and feeds, or where high heat is a factor.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page