Shop

Air Operated Pump Kit designed to dispense directly from 205L drums or tanks.

• This kit allows direct dispensing from drum (205L/54 gal drum)
• Suitable for oils and fluids up to SAE 140 viscosity
• Delivery output up to 14LPM viscosity dependant
• Air inlet: 1/4″ BSP(F)
• Fluid outlet: 1/2″ BSP(F)
• Kit supplied with 3:1 ratio pump with bung adaptor, 3m x 12.5mm delivery hose, metered oil control gun with fitted rigid extension with non-drip nozzle and drum bung wrench (Aluminium 2″- 3/4″)
• Outlet Hose Length – 3m (10’ft) x 12.5mm 1/2″
• Note: Air lubricator supplied

The MAOP20 All-Purpose 20L Oil Transfer Pump is designed for dispensing most service fluids including engine, gear, transmission, hydraulic and some engine coolants from 20L – 25L drums. An extendable suction tube and two additional bung adaptors ensure that the expanding range of different size and types of drums are easily catered for. Delivery on the down-stoke makes this pump easy to use especially when the drum is low on fluid. An extra-long clear delivery hose gives easy identification of the fluid type and allows better reach into difficult areas.

The BOP 20 litre (5 gal) stem kit includes 1.5m (5 ft) dispensing hose with gun, common bung adaptors and a 20 litre stem suitable for engine oil, gear oil, hydraulic oil (oils up to SAE140 viscosity), automatic transmission fluid (ATF) and engine coolant.

• Suitable for engine oil, gear oil, hydraulic oil (oils up to SAE140 viscosity), automatic transmission fluid (ATF) and engine coolant
• Drum size – nominal 15-25 litre (5 gal)
• 1.5 metre (5 feet) reinforced transparent dispensing hose
• Lubricating Oils – Flow rate up to 3.5 L/Min (SAE40 at 20OC)
• Heavy Oils – Flow rate up to 2 L/Min (SAE140 at 20OC)
• Automatic Transmission Fluid (ATF) – Flow rate up to 4.5 L/Min
• Coolant – Flow rate up to 5.8 L/Min

The BOP 20 litre universal stem starter kit includes the Power Head, rechargeable 18V 2Ah Lithium-ion battery, 1 hour fast charger, 1.5m dispensing hose with gun, common bung adaptors and a 20 litre stem suitable for engine oil, gear oil, hydraulic oil (oils up to SAE140 viscosity), automatic transmission fluid (ATF) and engine coolant.

• Suitable for engine oil, gear oil, hydraulic oil (oils up to SAE140 viscosity), automatic transmission fluid (ATF) and engine coolant
• 18V rechargeable 2.0Ah lithium-ion battery
• 1 hour fast charge
• Up to 105 litres per charge
• Drum size – nominal 15-25 litre
• 1.5 metre reinforced transparent dispensing hose
• Lubricating Oils – Flow rate up to 3.5 L/Min (SAE40 at 20OC)
• Heavy Oils – Flow rate up to 2 L/Min (SAE140 at 20OC)
• Automatic Transmission Fluid (ATF) – Flow rate up to 4.5 L/Min
• Coolant – Flow rate up to 5.8 L/Min

The K29 FLEXIGUN® is a classic grease gun that incorporates a unique variable stroke piston and valve arrangement for true one handed operation. The push in handle is easy to use and requires much less effort to operate. Increased pressure can be produced by short strokes (low volume) or high volume using a long stroke (low pressure). Heavy duty pistol grip construction with comfortable ergonomics to suit 450g grease cartridges, bulk filling or Macnaught J3 grease transfer pump loading. The K29 is fully repairable with a strong die cast head and heavy gauge steel barrel for extra long service life.

• 1″ BSP (F) inlet
• 15/16″ o.d. spout
• Suitable for Diesel
• Max. Flow Rate : 70LPM
• No spare parts available

AGRICULTURAL KIT 110pce

• Head profile as per SAE J534/DIN 71412* (*for metric fittings only)
• Heat Treated greasing end
• Zinc plating exceeds ASTM B117
• Fittings with ball check use heat treated springs for increased life

Oil dispensing kit using the OILMASTER pump that can be attached to an IBC or bulk tank.

• Sturdy mounting plate for pump & reel, pre-drilled
• OLP100 RETRACTA oil reel – 10m hose
• T312-01 air-operated oil pump
• All necessary fittings and hoses
• No Gun

• Pressures up to 12,000psi
• 1/8” NPT (F) Inlet
• Easy to use, snap on and twist and pull off
• Superior jaw design to ensure maximum grip
• Robust and compact design
• Reliable unblocking with leak free seal
• Suitable for use with any greasing system

Macnaught’s patented release mechanism delivers enhanced safety and is both easier and faster to use. The KY+ (BSP Thread) retains the benefit of the original floating jaw design, providing a strong, leak-free connection while improving safety & usability through:

• Internal pressure relief that reduces the risk of high pressure grease release
• Quick & easy release mechanism enabling one handed operation – Load & Lube!

Macnaught’s patented release mechanism delivers enhanced safety and is both easier and faster to use. The KY+ (NPT Thread) retains the benefit of the original floating jaw design, providing a strong, leak-free connection while improving safety & usability through:

• Internal pressure relief that reduces the risk of high pressure grease release
• Quick & easy release mechanism enabling one handed operation – Load & Lube!

The P8-11 POWERLUBE™ is a premium quality, reliable, 50:1 air-operated greasing system that is excellent for high volume grease users that have many applications and require continuous high pressure greasing. The P8-11 is suitable for 180kg pails and is equipped with a low air consumption motor that doesn’t need to be lubricated due to the use of modern polymer materials. Users will save on power and the oily mist and mess associated with air operated equipment is gone. Suitable for underground coal mine applications.

POWERGUN® 18V Li Ion 3.0 Ah battery powered grease gun built with Australian conditions in mind. This heavy duty grease gun combines the power and portability of high spec 18V Li Ion battery technology with the robust durability of cast alloy and steel pressure components to produce a product capable of serving in the most demanding conditions. Fitted with an illumination LED, a 1m long flexible grease hose and Macnaught’s legendary KY High Pressure Grease Coupler even the most difficult to locate and access grease points are within reach. Free standing or slung from the included shoulder strap the gun is easier to handle and generated less fatigue for the operator and the high/low volume valve lets the operator move grease quickly or at high pressure depending on the demand. Incorporating Macnaught’s heavy gauge steel 450gram stepped barrel, this grease gun is capable of dispensing from standard 450 gram grease cartridges or via bulk fill and bleeding is made easy by the spring loaded bleed valve. Included in the smart carry case is a spare 18V Li Ion battery for added longevity and portability and a 90 minute fast charger to keep the tool working.

The new Lubemate quick release couplers offer you the choice of a short or long nozzle to access a wider range of areas to lubricate more effectively. Both couplers include the hardened four jaw design which grips the grease nipple tighter, overall making the coupler more resilient under pressure. The unique red lever design makes uncoupling cleaner and effortless, allowing easier disconnection.