[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

TRUACUT TCT Multi-Saw Blades

In Stock
SKU: N/A Categories: ,

Additional information

Blade

110mm x 20 Teeth with a 20/16 Bore, 110mm x 20 Teeth with a 22/20 Bore

Related products

  • Saw Blades

    BORDO Diamond Saw Blades Hard Brick & Masonry
    • 350mm Segmented Diamond Hard Brick Blade
    • Hard brick and masonry.
    • 10mm segmented rim for fast cutting with enhanced blade/substrate interface cooling for long blade life.
    • Optimally designed for cutting cured concrete and stone.
    • Extreme concentration of diamond for fast, clean cutting and long blade life.
    • Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
    • Use when cutting bluestone, hard clay brick, fire brick, cured concrete, concrete block, concrete brick, granite, marble, wall chasing in hard brick & concrete.
    • Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
    • The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
    • Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
    • If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
    • If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
    • Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
    • The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
    • The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
    (0 reviews)
    Add to Quote
  • Saw Blades

    ITM Saw Blade TCT – Mild Steel

    Industrial quality T.C.T. cutting saw blade.

    Diameter: 355mm
    Bore: 25.4mm
    # Teeth: 66
    Max RPM:1450

    (0 reviews)
    Add to Quote
  • Saw Blades

    BORDO TCT Circular Saw Blades Tradecut Concrete Formwork
    • 235mm x 20T Tradecut Concrete Formwork Blade
    • High performance, tungsten carbide tipped timber blades from 160mm to 305mm.
    • Heavy duty anti-kickback tooth shoulders provide optimum support to the cutting tips ensuring maximum performance, extended blade life and safer cutting.
    • Fully hardened and tempered steel body resists warping even in the most demanding applications.
    • High performance diamond ground carbide teeth for improved cutting efficiency.
    • Designed for optimum performance and long blade life when cutting engineered woods such as hardwood ply and form ply.
    (0 reviews)
    Add to Quote
  • Saw Blades

    BORDO Diamond Saw Blades General Purpose Segmented Rim
    • General purpose.
    • 7mm segmented rim produces clean, fast cuts wet and dry.
    • Great for cutting a wide variety of non-abrasive materials.
    • Extreme concentration of diamond for fast, clean cutting and long blade life.
    • Can be used for either wet or dry cutting. Extended blade life will be experienced with wet cutting.
    • Use when cutting cured concrete, reinforced concrete, clay bricks, hebel®, terracotta tiles, slate, granite, bluestone, fibreglass, reinforced plastics, wall chasing in brick & concrete.
    • Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away.
    • The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
    • Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
    • If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
    • If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a ‘glazed blade’. Without exposed diamond the blade will not cut.
    • Abrasive materials like green concrete and asphalt will wear the metal bond very fast, so blades for these materials have a much harder metal bond to resist this abrasion.
    • The opposite occurs on a hard clay paver the clay paver is not abrasive enough to wear the metal bond fast enough to expose fresh diamond, therefore a different and much softer alloy is needed for cutting these types.
    • The single most important factor for the life of the blade is to match it to the job application and the type of equipment it is being used on.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page