TQB BRANDS Workshop Heater 50kW
This TradeQuip “Made for the Trade” Direct-Fired Forced Air Workshop Heater is ideal for workshops, garages and warehouses, reducing concrete freeze and emergency heating. The 56 Litre fuel tank can run for 9 hours on a single fill. It has on-board diagnostics and additional safety features. Ideal for quickly and efficiently heating cold condition workshops, this forced air heater can be used in a variety of commercial and industrial settings and is fuelled by kerosene or diesel. It is a reliable heating solution for an area of approx. 415 square metres and is easy to move and position as required thanks to the ergonomically designed inbuilt handle.
Features
- Burns diesel or kerosene
- Electronic flame control system
- Safety overheat thermostat and pressure switch
- Stainless steel heat exchanger
- Double skinned combustion chamber for thermo-acoustic insulation and safe low surface temperature
- Pre-purge and post-ventilation cycles
- Twist lock fuel cap with cable
Specifications
- Power Output: 50kW – 170,600 Btu/h
- Air Output: 1100m3/h
- Motor: 240V/50Hz 3400W
- Noise Level: 77dB(A)
- Air Delivery: 1100 cubic metres per hour
-
Fuel Consumption: 4kg per hour
-
Tank Capacity: 56 Litres
- Dimensions: 1090x 490 x 585mm
- Nett Weight: 27kg
- Carton: 1045 x 465 x 570mm
- Gross Weight: 31.8kg
Intended Use:
Ideal for space heating, frost protection and condensation control in commercial and industrial workshops, factories, and warehouses.
Related products
-
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 200W
With its compact size, this eQuipt “Designed to Deliver” Portable Evaporative Cooling unit is perfectly suited to smaller work spaces, yet still delivers an impressive amount of air output. This easy-to-operate unit produces up to 6,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . Adjustable swing louvre feature that offers swinging airflow and allows you to adjust the cooled air output to where you need it.
An evaporative cooler (also known as a desert cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water with a steady breeze to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, while the simplicity of the design results in low maintenance requirements.
Compared to other climate control systems available, evaporative air cooling provides the most energy efficient temperature relief for commercial or industrial environments of any scale.
Up to 80% more economical than conventional air conditioning systems, our evaporative cooling systems have delivered proved cost reductions and operational returns for many industrial and mechanical workshops.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more.
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50% rh, the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Easy to remove cooling pads & filters for quick & easy maintenance
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Conveniently located drain valve at bottom of tank for easy access
- Direct drive
- LCD 12 hour timer panel
- Nylon castors for easy portability
Specifications
- Power Unit: 220V 50Hz 200W 10amp plug
- Operating Current: 2.4A
- Power Cord Length: 2300mm
- Max. Air Flow: 9,000 m3 per hour
- Noise Level: 70dB(A)
- Speed Control: 3-speed
- Fan Diameter: 520mm 4-blade propeller
- Effective Cooling Area: 50-60m2
- Water Consumption; 5-6 Litres per hour
- Water Tank Capacity: 70 Litres
- Dimension: 1360(H) x 820(W) x 545(D)
- Nett Weight: 33kg
- Gross Weight 36kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Workshop Fan Floor 450mm
The TradeQuip “Made for the Trade” 450mm high velocity industrial floor fan provides portable cooling and adds ventilation wherever it’s needed. It controls the climate and improves workplace comfort featuring low, medium and high selectable fan speeds for maximum efficiency. This floor fan offers high-velocity output, thanks to its 165W 240V motor. The enclosed direct drive motor is protected from dust and debris to provide years of reliable service. The 3-speed switch gives you control over the airflow, and vertical tilt helps you control angle. Solid metal construction with durable steel blades.
Quality Construction and Materials
- Built with an all-metal structure and heavy-gauge chromium steel wire grille and cage for maximum toughness, durability and safety
- Portable with thick rubber stoppers that do not mark, and grip any surface to keep the fan secure
Fully Enclosed Direct Drive Motor
- The fully enclosed motor provides years of reliable service by preventing the build-up of dust and debris in vital areas
- Direct drive motor runs on less power and requires less maintenance compared to other motors
Built To Get The Job Done
- This industrial quality floor fan makes workplaces more comfortable by using aerodynamically balanced steel blades to deliver plenty of airflow, cooling large areas fast
- The vertical tilt feature always allows you to direct the air where you need it
- Manufactured to TQB Brands specifications with safety in mind that exceeds Australian Standards requirements
Specifications
- Motor: 240V/50Hz/165W 3Speed
- Fan Blade: 450mm 3 Steel Blades
- Noise Level: 69dB(A)
- Air Delivery: 142sqm per minute
- Adjustable Flow Angle: Up to 15 degrees
- Nett Weight: 6.5kg
- Carton: 590 x 250 x 570mm
- Gross Weight: 7.5kg
Intended Use
This equipment is intended to be used for cooling industrial or trade workshop/office environments by airflow circulation. Best used to cool when directed at a small area.
This product is an Industrial Product and not suitable for household use.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Ventilation Fan 450mm
WARNING: THIS UNIT IS NOT AN EXTRACTION FAN
This TradeQuip “Made for the Trade” Portable Ventilator Fan airs out rooms, circulates air or dries wet areas with a powerful air output of 162m³ per minute. Perfect for drywall, painting, auto body work, welding or any area that needs clean air fast. Features include an ergonomic handle for effortless transport and an aluminium blade and steel housing construction for long lasting performance. Complete with 5 metre flexible ducting.
Features- Aluminium blade and steel housing construction for long lasting performance
- Ergonomic handle for effortless carrying
- Four rubber feet for secure footing on any surface
- Fire resistant flexible exhaust ducting
- Great for dry wall, painting, resurfacing, tile repair, auto body work, welding
- Complete with 5 metre flexible ducting
Specifications
- Diameter: 450mm Alloy Multi Blade Fan
- Motor: 240v/50Hz
- Noise Level: 83dB(A)
- Start Power: 4.5kw – 21A
- Running Power: 1700w – 7A
- Speed: 2800rpm
- Air Delivery: 162m³/per minute
- Static Pressure: 972Pa
- Amperage: 10A
- Ingress Protection: IP42 Rated
- Dimensions: 475(H) x 585(W) x 545(L) mm
- Weight: 35kg
- Carton 1 of 2: 475 x 585 x 545mm (Weight: 31kg)
- Carton 2 of 2: 480 x 480 x 200mm (Weight: 6kg)
Replacement 5 metre Flexible Tube available: Product Code: 1141T-1
Intended Use:
Ventilation fans are designed to remove and dispense contaminated air from industrial workshop processes which generate heat, steam, or other noxious emissions. Can also be used to blow fresh air into a confined work space such as a tank or man hole.
This product is an Industrial Product and not suitable for household use.
Warning:
This product is NOT recommended for use with a Generator.
(0 reviews) -
Fans, Coolers, Heaters & Air ConTQB BRANDS Evaporative Cooler – 550W
With its compact size, this TradeQuip “Made for the Trade” Portable Evaporative Cooling unit is perfectly suited to smaller work areas, yet still delivers an impressive amount of air output. Huge in performance, this easy-to-operate unit produces up to 18,000 cubic metres of airflow per hour. It is fitted with a rugged, weather-resistant one-piece moulded polyethylene housing that will not crack or leak. The remote control 3-speed fan forces warm air over rigid water soaked evaporative cooling media to reduce ambient temperatures by up to 10°C . The adjustable swing louvre feature offers swinging airflow and can be adjusted to direct the cooled air output to where it is needed.
An evaporative cooler (also known as a desert cooler, swamp cooler or wet air cooler) is a device that cools air through the evaporation of water. These units are well suited for climates where the air is hot and humidity is low. They combine the natural cooling properties of water, with a steady breeze… to lower indoor temperatures. Evaporative cooling will provide a substantial energy savings over refrigerated air units, whilst the simplicity of the design results in low maintenance requirements.
With the substantial savings of energy and the constant changes in the air, a portable evaporative cooler is ideally suited for area cooling or spot cooling of rooms, workshops, factories, laundries, schools, agricultural sheds, and more. (Previous models include product code/s; 1028T)
Water Consumption can increase by 300% due to ‘Relative Humidity’
Note: Evaporative Coolers operate by combining a variable airflow and water evaporation. How much water is used (Water Consumption) depends on the ‘Relative Humidity’ of the day and the fan speed setting to meet the required cooling levels. Relative Humidity (rh) is the ratio of the amount of water (as vapour) actually contained in the air to the maximum amount of water vapour that could be contained at the same temperature (saturation). For example, at 50%(rh), the air contains 50% of the maximum (100%) amount of moisture (water vapour) that it could contain at the same temperature. Therefore when the relative humidity level is low all Evaporative Cooling units may consume a more significant amount of water (up to 300% more) than higher relative humidity ratio conditions.
Features
- One-piece moulded polyethylene housing will not crack and is rust and leak proof
- Environmentally-friendly alternative to traditional reverse cycle A/C
- Cools without chemicals or refrigerants
- Long-term dependability-near maintenance-free operation
- European design synchronous swing function
- Cools where traditional cooling methods are impractical or cost-prohibitive
- Easy to read water level sight tube gauge
- Dual pour in refill water inlet and/or 3/4″ hose fitting for automatic tap refill
- Adjustable water flow and drain valve
- Direct drive
- LCD 24hour timer panel
- Nylon castors for easy portability
- Remote control speed adjustment
Specifications
- Power Unit: 240V 50Hz 550W 10amp plug
- Max. Air Flow: 18,000 m3 per hour
- Noise Level: 70dB(A)
- Fan Diameter: 750mm (3 Blade)
- Speed Control: 3-speed
- Effective Cooling Area: 100-150m2
- Water Consumption; 12-18 Litres per hour
- Water Tank Capacity: 100 Litres
- Castor Wheels: 100mm Dia (2 with brakes)
- Ingress Protection: IP42 Rated
- Dimension: 1510(H) x 1120(W) x 680(D)
- Nett Weight: 58kg
- Carton: 1510 x 1120 x 680mm
- Gross Weight 68kg
NOTE: FREIGHT RATES MAY APPLY!
Intended Use:
This equipment is intended for cooling industrial or trade workshop/office environments. Best used in hot dry climates where the humidity is low, evaporative coolers are generally suitable for areas with dry summers, although their effectiveness will be reduced during the occasional periods of high humidity weather.
This product is an Industrial Product and not suitable for household use.
(0 reviews)