CHEMTOOLS Threadlocker 8222 Low Strength 10ml
Chemtools 8222 Threadlocker Low Strength 10ml
Low strength threadlocker designed for the locking and sealing of threaded fasteners and is ideal for diameters of 6 mm and smaller.
Military Specification: | S-46163 Type II, Grade M |
Strength: | Low |
Colour: | Purple |
Viscosity: | Medium |
Viscosity in Centipoise Cps @ 20oC: | 1200/1500 |
Ideal for Fasterners up to: | 1/4″ – 6.35mm |
Cure speed – Fixture time in Mins: | 20 |
Cure speed – Full Strength in Hours: | 24 |
Temperature Range: | 50oC – 150oC |
Related products
-
CRC
CRC Hot Shot Degreaser 500g
CRC Hot Shot Degreaser is a highly concentrated, self-emulsifying solvent degreaser specially formulated to quickly cut and remove grease, oil and dirt on all types of equipment.
Recommended for cleaning and degreasing automobile engines, industrial equipment, farm equipment, lawn mowers, garage floors and tools
Quickly dissolves grease, oil and dirt. Cleans iron, steel, aluminium, magnesium and copper. Not harmful to metal, rubber, plastic or concrete. Rinses off easily with water. 360° Aerosol valve for ease of application.
(0 reviews) -
Chemicals, Lubricants & Adhesives
SIKA Sika® Primer-209 D
Pigmented, solvent based primer for paints and plasticsSika® Primer-209 D is a solvent-based, black primer that reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives.
Sika® Primer-209 D is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes. This primer might provide excellent adhesion without previous activation step on certain plastic substrates.Sika® Primer-209 D is used to improve adhesion on many plastics and paints such as GRP, epoxy resins, PVC, ABS, PMMA, PC, PS, acrylics, alkyds/melamine, powder coatings and baking varnishes.
Due to the wide variety of plastics, it is mandatory to perform preliminary tests on original substrates under production conditions.
Seek manufacturer’s advice and perform tests on original substrates before using Sika® Primer-209 D on materials prone to stress cracking.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.(0 reviews) -
Chemicals, Lubricants & Adhesives
SIKA Sikaflex®-252
Elastic adhesive for vehicle assembly bondingSikaflex®-252 is an elastic 1-component polyurethane adhesive especially designed for bonding large components in vehicle assembly. It is suitable for bonding coated metal, GRP, ceramic materials and plastics.
- Bonds well to a wide variety of substrates
- Capable of withstanding high dynamic stresses
- Good gap-filling properties
- Bonds well to a wide variety of substrates
- Capable of withstanding high dynamic stresses
- Good gap-filling properties
- Can be painted
- Vibration-damping
- Electrically non-conductive
Usage
Sikaflex®-252 is suitable for assemblies that are subject to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminum (including anodized components), sheet steel (including phosphated, chromated and galvanized components), metal primers and paint coatings (2-component systems), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
(0 reviews) -
Chemicals, Lubricants & Adhesives
SIKA Sika® Filler-101
Ready to use water based fine surface and joint fillerSika® Filler-101 is a water based, ready to use joint filling and wide spreading of internal surfaces
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Sika® Filler-101 is suitable for indoor filling work on plaster boards, fabrics, old wallpapers, etc.
- Sika® Filler-101 has a very smooth finish
- Sika® Filler-101 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)
Advantages
- Ready to use, no mixing required
- Easy application
- High initial tack or grab on plaster and concrete
- Quick drying
(0 reviews)