SYKES-PICKAVANT Infrared Laser Tachometer
- Non-contact Infra-Red Laser Tachometer for measuring RPM on rotating shafts, pulleys, wheels etc.
- Infra-red laser picks up signal from reflective tape which is placed on the rotating shaft
- Features bright and powerful laser optical system for easy targeting of rotating object, even in bright daylight
- Measurements can be obtained from safe and comfortable distances from 5 to 50cm
- The large 5 digits display allows measurements without the need to switch scales or multiply reading ranges
- Unit comes complete with batteries and reflective tape in a soft carrying pouch
Related products
-
Diagnostic ToolsSP TOOLS Multi-Function Smart Tool with Wifi & Built-In Printer – 5 Tools in 1
SMART AUTOMOTIVE TESTING
The SP Smart Tool is a multi-function Android tablet based scan tool with an easy to use and understand user interface, capable of running sophisticated whole system diagnosis on more than 100 car brands throughout Europe, America, Asia and China and offers support to more than 20 common maintenance special functions, CAN FD, DoIP and various diagnosis protocols. Combining multiple professional tools into one, this SP Smart Tool is an essential tool for any modern professional workshop. The built-in printer allows technicians to print out hard copies of test reports on the go and the massive 64GB of on-board storage allows users to save test reports for later viewing and comparison.
5 TOOLS IN 1
BATTERY ANALYSER
- Two test modes – Out-of-car Inspection and In-car Inspection
- Analyses battery health and calculates the actual cold starting ability of the battery
- Battery bar code scanning for rapid test setup
- Battery matching enables you to perform a resetting operation on the monitoring unit of the vehicle’s battery, in which the original low battery fault information will be cleared and battery matching will be done
- Test results based on CA, CCA, BCI, MCA, JIS, SAE, EN, GB, DIn & IEC standards
- Built-in printing functionality provides instant hard copy test results
TPMS TESTER (Tyre Pressure Monitoring System)
- Provides the ability to activate most OEM/Universal TPMS sensors, reprogram sensor IDs, retrieve/clear TPMS DTCs and relearn sensors, helping technicians quickly find out faulty TPMS and turn off MILs
- Ultra wide coverage – Covers more than 98% of vehicles with the Tyre Pressure Monitoring System
- Supports 315MHz/433MHz tyre pressure sensor activation and matching learning
- Reads tyre pressure data, including pressure, tyre temperature, battery status and more
- Can read/copy/write sensor ID value.
DIAGNOSTICS TESTER
- Connects via DLC (Data Link Connector) and quickly accesses all the electronic control units of the vehicle and generates a detailed report about vehicle health
- Compare pre- and post- repair reports and easily identify which DTC’s are cleared and which remain unfixed
- Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
- Identifies which systems are installed on the vehicle
- Views and captures (records) real-time Live Data and saves the data in text format
- 3 Types of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way – Text in list format, waveform graphs or in a merged graph for easy data comparison
- Update vehicle diagnostic software and APK
- Able to record diagnostic data that can serve as valuable information to help you in troubleshooting vehicle problems
- Able to run actuation test to access vehicle-specific subsystem and component tests
VEHICLE MAINTENANCE
This module provides an easy dial to quickly access the most commonly performed service functions as follows:
- Oil Reset Service
- Electronic Parking Brake Reset
- Steering Angle Calibration
- ABS Bleeding
- Gear Learning
- IMMO Service
- Injector Coding
- TPMS (Tyre Pressure Monitor System) Reset
- Battery Maintenance System (BMS) Reset
- Diesel Particulate Filter (DPF) Regeneration
- Electronic Throttle Position Reset
- AFS (Adaptive Front-lighting System) Reset
- AdBlue Reset (Diesel Engine Exhaust Gas Filter)
- Gearbox Matching
- Sunroof Initialisation
- Suspension Calibration
- EGR Adaption
- Windows Calibration
- Seats Calibration
- Tyre Reset
- Language Change
- A/F Reset
- Coolant Bleed
- Transport Mode
- NOx Sensor Reset
- Stop/Start Reset
VIDEOSCOPE SUPPORT
(Available as an attachment – SP61173*)
With forward and side facing cameras this probe allows technicians to quickly and easily inspect engine and vehicle components, without major disassembly
KIT INCLUDES
-
- SP Smart Tool
- Diagnostic cable – DLC
- Battery cable clamps
- USB Type-C cable
- 12v auxiliary power outlet cable
- OBD I adaptor box
- Non-16pin adaptor cable kit
All Housed in a heavy duty Blow Mold Case
SPECIFICATIONS
- Operating system: Android 10
- Memory: 4GB
- Storage: 64GB
- Screen: 5.99” Capacitive touch screen
- Resolution:720 x 1440 pixels
- Camera: Rear-facing 8.0MP camera
- Wi-Fi: 2.4GHz/5GHz dual band
- Battery: 4500mAh/7.6v
- Working temperature: 0 to 45°c
- Storage temperature: -10 to 60°c
CONNECTIVITY
- DB15 Diagnostic connector
- USB Type A port x 1 + USB Type C port
- Circular connector for battery tester clamps
- OBD-II, OBD-I (Includes adaptor cables)
- Wi-fi internet connection
(0 reviews) -
Diagnostic ToolsKLEIN TOOLS Digital Multimeter, TRMS Auto-Ranging, 1000V, Temp, Low Impedance
- Multimeter with automatic ranging True Root Mean Square (TRMS) technology for increased accuracy
- Tester measures up to 1000V AC/DC voltage, 10A AC/DC current and 60 MOhms resistance, plus temperature, capacitance, frequency, low impedance (LoZ), duty-cycle, test diodes and continuity
- High visibility, reverse contrast display with optical sensor, to automatically optimise viewability in dark or bright ambient lighting
- Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
- Low battery indicator and easily accessible battery and fuse compartment
- Tough meter is built to withstand a 6.6′ (2 m) drop and is rated IP42
- Includes carrying pouch, test leads, thermocouple with adapter, and batteries
- CAT IV 600 V safety rating
- For use in basic and controlled electromagnetic environments, such as residential, business and light-industrial locations
(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Data Logging Particulate Monitor sensor with the Series 500 Handheld
IC-PM-500
This kit comes supplied with the IC-PM and the IC-HH S500L handheld monitor. The IC-PM is Aeroqual’s portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 200 will allow you to view these results in real time and if desired purchase additional sensor heads to monitor other gases.
Series 500 Lithium Air Quality Portable Monitor features and specifications:Features:– Simple to use, easy to maintain, multiple applications.– Interchangeable gas sensor heads.– Field replaceable long life Lithium battery (up to 8 hours).– Minimum, maximum and average readings.Specifications:– Measurement units: Gas: ppm or mg/m3 | Humidity: % | Temperature C or F– Reading functions: Instant, minimum, maximum, average– Sensor head: Interchangeable, replaceable– Display status indicators: Battery, sensor, standby– Sensor calibration: Zero and gain calibration– Analog output: 0-5 V– Digital Interface: RS-232 to USB– Data logging: Up to 8,188 records (2706 incl. Temp/RH)– PC data logging (Windows 7, 8, XP): Software and data cable supplied. Link data to a specific location and monitor.– Clock function: Real time– Power supply: 12V DC (power adaptor/charger supplied 100-250 V AC)– Rechargeable battery: Lithium polymer 12 V DC 2700 mA/h– Enclosure material and rating: PC and ABS; IP20 and NEMA 1 equivalent– Size (with sensor head): (L x W x D) 195 x 122 x 54 (mm); 7 x 4 x 2 (in)– Environmental operating conditions: Temperature: -5 C to 45 C/Humidity: 0 to 95 % non-condensing– Temperature & Humidity sensor: Range – 40 C to 124 C (- 40 F to 255 F); Range 0 to 100 % RHParticulate Matter Sensor features and specifications:The IC-PM is Aeroqual’s portable portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Compatible with Aeroqual’s Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.– Range: 0.000 to 1.000 mg /m3– Measurement Parameters: PM2.5 and PM10– Sensor Type: Laser particle counter– Minimum Detection Limit: 0.001 mg/m3– Accuracy of Factory Calibration: +/- (0.002 mg/m3 + 15 % of reading)– Resolution: 0.001 mg/3– Response Time: 5 Seconds– Temp: 0 to 40C– Relative Humidity: 0 to 90% non-condensating(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Wireless Vantage Pro 2™ Plus With Standard Radiation Shield and Weatherlink Live Console
IC-6262AU
A wireless weather station with a versatile sensor suite that combines our rain collector, temperature and humidity sensors and anemometer into one package. You can customize your Vantage Pro 2 by adding consoles or the special-purpose options. First and only weather station in its class to use frequency hopping spread spectrum radio technology to transmit weather data wirelessly up to 1,000 ft (300 m).6262AU Key Benefits:– Get notified about accurate weather updates in real-time that updates every 2.5 seconds
– Transmission range of 300 meters from the sensor suite to the console.– Sensor suite includes outside temperature and humidity sensors in passive radiation shield.
– Also includes wind speed and direction; rainfall; and UV and Solar radiation sensorsThe WeatherLink ConsoleThe WeatherLink Console is a powerful data display, storage, and analysis tool that can be used to view data from up to 8 transmitting sensors or sensor suites in one location. It can be used without Wi-Fi, but it can also be connected to Wi-Fi to join the WeatherLink community and upload and share data safely and securely.The WeatherLink Console allows you to build your own custom dashboard that is customised to the environment you are monitoring. You can see today’s forecast when you wake up, check the latest conditions as you head outdoors, view, analyze, and share weather data on the largest global network of personal weather stations, and connect your data to smart irrigation systems or connect to Amazon Alexa and Google Assistant to ask for the latest conditions.Here are some of the key features of the WeatherLink Console:-See data from up to 8 transmitting sensors or sensor suites in one location.-Choose from 80+ sensors to customise your own personal weather network.-Build your own custom dashboard.-See today’s forecast when you wake up and check the latest conditions as you head outdoors.-View, analyse, and share weather data on the largest global network of personal weather stations.-Connect your data to smart irrigation systems or connect to Amazon Alexa and Google Assistant to ask for the latest conditions.The WeatherLink Console is a powerful tool that can be used to monitor and analyze weather data. It is a great option for those who want to track weather conditions in their home, garden, or business.2 Year Warranty (1 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)6262AU Features– Industry leading transmission distance of 300m line of sight.– Anemometer cable at a length of 12m to allow for perfect placement.– Both Solar and UV sensors– WeatherLink Console offers connectivity to push data online to weatherlink.com– Fast updates every (2.5 seconds)– Touchscreen interactive displayStandard package includes:Solar powered Integrated Sensor Suite, Rain Collector, Temperature and humidity sensors, Anemometer with 12m cable, Solar panel, WeatherLink Console, Power adaptor for the console, Mounting hardware and Solar and UV sensors.(0 reviews)