SYKES PICKAVANT Butane Soldering Iron Kit – 9 Piece
- Three features in one kit: Soldering Iron, Hot Torch & Hot Blower
- Includes 8 accessories and attachments for all soldering applications
- See-through viewing window provides an accurate level of remaining butane
- Stainless steel butane tank for extra strength and durability
- Piezo ignition with adjustable flow and constant flame capability
- Inbuilt stand and child safety latch
- Tool case doubles as a workstation to securely hold the soldering iron and solder dispenser
- Please note: This kit is not supplied or filled with butane gas
ATTRIBUTES
| Burning Time | 60 min |
|---|---|
| Butane Storage Capacity | 15ml |
| Flame Temperature | 1300C max |
| Fuel Type | Butane |
| Hot Air Temperature | 600C Max |
| Soldering Temperature | 450C max |
Related products
-
ElectricalSYKES PICKAVANT Inteliprobe 6-24 Volt Tester
- The Inteliprobe is an intelligent circuit and continuity tester ideal for locating bad earths, breaks in continuity and short circuits. Simply hook up the battery clips to the vehicle battery and the tool is ready for use. Suitable for 6V – 24V electrical systems, which makes it ideal for motorcycles, cars, boats and trucks
- Polarity Test – LED changes colour to indicate the polarity on the probe pin Red = positive, Green = negative
- Continuity Test – between the probe pin and the auxiliary croc clip lead. Test wires and components that are disconnected from vehicles electrical system. When continuity is present LED illuminates green
- Short Circuit Protection – a thermal breaker which can be manually reset, will trip out at 8 Amps providing protection to the vehicles wiring system
- On-vehicle Component Tests – pushing the switch forward causes a positive potential on the probe tip, and pushing the switch backwards causes a negative potential on the probe tip. This enables the user to energise components such as lights, locks, and trailer connections without having to remove them from the vehicle
- Off-vehicle Component Tests- by using the green lead as ground connection, energising the probe tip will enable the user to check the component
(0 reviews) -
Soldering KitsSP TOOLS 3 Direction Hot Staple Tip Attachment – Suits SP32295
FEATURES
- 150W Hot Staple Tip (3 Direction)
- 77 x 27mm
- Suits 12.5mm staples
Note: This tip suits SP32295 – 90w Li-ion Cordless Soldering Iron Kit only
(0 reviews) -
Nihon Superior SN100CCHEMTOOLS Nihon Superior SN100C Lead Free Solder Bar
SN100C Lead Free Solder Bar alloys are developed by Nihon Superior in Japan. It is comprised of tin, copper, and a small amount of nickel. SN100C offers user-friendly properties and has been proven in commercial production since 1999. The addition of nickel improves the wetting and flow properties of the cost-effective tin-copper eutectic. This makes it possible to achieve excellent results in wave soldering at process temperatures comparable to the tin-lead solder it replaces. Performance in wave soldering at least matches that of more expensive silver-containing alloys and the resulting joints are smoother and brighter.
The patented addition of nickel ensures the wetting and flow properties make it possible to achieve excellent results in wave soldering at process temperatures comparable with those used with the tin-lead solder it replaces. Performance in wave soldering at least matches that of more expensive silver-containing alloys and the resulting joints are smoother and brighter.
Features of SN100C
* Does not contain silver or bismuth
* Eutectic alloy
* Bridge-free and icicle-free soldering
* Smooth, bright, well-formed fillets, free of gross micro-cracks, irrespective of the cooling rate
* Good through-hole penetration
* Good topside fillet formation
* Dross rate equal or lower than tin-lead solder
* Does not require a nitrogen atmosphere
* Does not erode copper from holes, pads and tracks
* Low rate of copper leaching makes it easy to control the copper content of the solder bath
* Lower aggressiveness to stainless steel and other solder pot materials as compared to tin-silver-copper alloys
* Thermal fatigue resistance and creep strength better than tin-lead
* Slow, even growth of the intermetallic layer at the solder/substrate interface
* Also performs well in selective and dip solderingThe ‘Bottom Line’
Customer experience over several years is that the TOTAL cost of running a standard wave soldering machine with SN100C when all factors are taken into account can be up to one third the cost of running the same machine with tin-silver-copper alloys. The actual savings in each case will depend on the number of factors that apply, but the cost of running a line with SN100C is always lower than the cost of running the same line with tin-silver-copper.(0 reviews) -
Speciality ToolsSP TOOLS Self-Igniting Professional Gas Soldering/Torch Kit
- Professional self-igniting cordless butane gas soldering iron with interchangeable tips to suit most soldering applications
- Ideal for various applications in automotive repairs, electrical/electronic circuit repair, light gauge welding, brazing and jewellery industries.
- Lightweight and compact design, all neatly stored in heavy duty x-case.
- Fast heat-up for increased productivity with a 70 minute continuous use run time
- Can be used as a blow torch
KIT INCLUDES:
- Refillable butane gas soldering iron
- Lead free soldering wire in dispenser
- Cleaning sponge
- Heat insulated protective head cap
- Deflector attachment
- Standard Tip
- Anvil Tip
- Chisel Tip
- Knife Tip
- Needle Tip
(0 reviews)