[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

SUTTON Centre Drill Sets – Plain – Type

For drilling 60° centre holes in the end of shafts

In Stock
SKU: D136-Sets Categories: ,

Related products

  • Drill Bits & Sets

    BORDO Spade Bit 150mm
    • Standard length 150mm Fast Cut Spade Bit
    • Heavy Duty Fast Cut Spade Bits provide extreme performance in the toughest timbers.
    • The Bordo range of standard length (OAL 150mm) spade bits are ideal for creating holes in a wide variety of timbers.
    • Low cost per hole.
    • Fast starting.
    • Hex shank prevents slippage in drill chuck.
    • Hex shank ensures a positive lock in spade bit extensions.
    • Suits all standard quick change adaptors.
    • Recommended speed 1500-2000 RPM.
    • Ensure the back of the material being drilled is clear of electrical circuits, pipes, metal objects and any other hazardous objects.
    • Do not use side to side movements when drilling.
    • DO NOT USE HAMMER ACTION
    • DO NOT USE FOR DRILLING METAL
    • DO NOT EXCEED 2500 RPM
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Drill Bits & Sets

    BORDO Self Feeding Wood Bit
    • Self Feeding Wood Bit.
    • The Bordo range of Self Feeding Wood Bits are ideal for drilling large diameter holes in soft woods for plumbing and conduit penetrations and a wide variety of other applications.
    • 7/16″ hex shanks to suit drills with 1/2″ (or larger) chuck.
    • Precision milled shank which eliminates wobble and runout.
    • Spurs on the outside diameter cut holes cleanly and accurately.
    • Dual inside cutting planes shave hole radius for clean, smooth holes without pressure.
    • Forged in one piece from high carbon steel for maximum strength under the toughest drilling conditions.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Drill Bits & Sets

    BORDO 4 Cutter Glass and Tile Drill Set
    • 4-10mm 5 Pce 4 Cutter Glass and Tile Drill Set
    • Tungsten Carbide 4 Cutter Glass and Tile Drill Set
    • Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
    • Fast starting with reduced bit wander.
    • Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
    • Not suitable for use with toughened or laminated safety glass.
    • Use a slow speed with steady but gentle pressure.
    • Reduce the pressure at break through.
    • For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
    • When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
    • Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
    • Carbide is three times stiffer than steel and is much denser than either steel or titanium.
    • Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
    • Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
    • Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
    • Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
    (0 reviews)
    Add to Quote
  • Drill Bits & Sets

    BORDO 4 Cutter Glass and Tile Drill Hex Shank
    • Tungsten Carbide 4 Cutter Glass and Tile Drill
    • Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
    • Fast starting with reduced bit wander.
    • Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
    • Not suitable for use with toughened or laminated safety glass.
    • Use a slow speed with steady but gentle pressure.
    • Reduce the pressure at break through.
    • For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
    • When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
    • Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
    • Carbide is three times stiffer than steel and is much denser than either steel or titanium.
    • Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
    • Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
    • Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
    • Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page