SP TOOLS Professional Timing Light
- 4 function digital display readout and easy to read backlit LCD
- Heavy duty inductive pick-up and clamps
- One handed operation
- Detachable leads for easy replacement and use
- Protective hand guard for added safety
- Rotating barrel for better aim at timing mark and LCD viewing angle
- Patented Skip circuitry – Tests up to 10,000 RPM
- Easy access slim-line barrel
- Optical correct lens
- Shock resistant boots
- Tachometer: 249 to 9,990 RPM (+/-1% accuracy)
- Advance degrees (2 and 4 cycle DIS and conventional): 0º to 90º (+/- 5º accuracy)
- Dwell: 0º to 180º /2-12 cylinders (+/-1% accuracy)
- Voltage: 10 to 16 volts DC (+/- 1% accuracy)
Related products
-
Diagnostic Tools
INSTRUMENT CHOICE Waterproof Pocket Wind Meter (Anemometer)
Kestrel-1000
Please note: These units will come with a “Certificate of Conformance” from Kestrel, however, in general this does not constitute a formal calibration certificate.The Kestrel 1000 Pocket Wind Meter was the original meter of this type, and it is still going strong. Users will receive accurate current wind speed, average wind speed and maximum wind gust reports while on the go. The only thing that has changed about this reliable model over the years is the aesthetics of the unit.The Kestrel 1000 can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort measurements. The meter features a one inch impeller mounted on a sapphire jewel bearing to ensure that it starts running at the slightest hint of air.The unit comes with a protective case, a Kestrel Certificate of Conformity, a neck lanyard and a five year manufacturer’s warranty.6 Year Warranty (5 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
What does the Kestrel-1000 Measure?– Current Wind Speed
– Average Wind Speed– Maximum Wind Gust
Features:– Aviation green electroluminescent back light
– Stores maximum and average recordings– Auto shut down after 45 minutes with no activity– One touch clear and reset– Assembled in the U.S.– Data Hold Function– Large LCD screen– Protective Cover– Waterproof and floats– Patented user-replaceable impeller– Neck lanyard
Specifications:– Wind Speed Range: 0.4 to 60.0 m/s, 59 to 11,948 ft/min, 1.0 to 218.0 km/h, 0.8 to 135.0 mph, 0.6 to 118.3 kt and 0 to 12 B
– Display updates every second– Accuracy Rating: Within three percent– Operational Temperature: -10C to 50 C
Power Requirements:– CR2032
Dimensions:– 122 mm x 42 mm x 18 mm(0 reviews) -
Diagnostic Tools
SP TOOLS Non-Contact Digital Tachometer
- LCD display with backlight
- Laser target
- Range: 100-30000rpm,1.7-500rps
- Accuracy: +/-0.1% reading (100.0 -9,999rpm), +/-0.02% reading (10,000 -30,000rpm)
- Auto power off
- 1.5V x 3 AAA batteries
- Protective cover and carrying case
(0 reviews) -
Diagnostic Tools
SP TOOLS Multi-Function Smart Tool with Wifi & Built-In Printer – 5 Tools in 1
SMART AUTOMOTIVE TESTING
The SP Smart Tool is a multi-function Android tablet based scan tool with an easy to use and understand user interface, capable of running sophisticated whole system diagnosis on more than 100 car brands throughout Europe, America, Asia and China and offers support to more than 20 common maintenance special functions, CAN FD, DoIP and various diagnosis protocols. Combining multiple professional tools into one, this SP Smart Tool is an essential tool for any modern professional workshop. The built-in printer allows technicians to print out hard copies of test reports on the go and the massive 64GB of on-board storage allows users to save test reports for later viewing and comparison.
5 TOOLS IN 1
BATTERY ANALYSER
- Two test modes – Out-of-car Inspection and In-car Inspection
- Analyses battery health and calculates the actual cold starting ability of the battery
- Battery bar code scanning for rapid test setup
- Battery matching enables you to perform a resetting operation on the monitoring unit of the vehicle’s battery, in which the original low battery fault information will be cleared and battery matching will be done
- Test results based on CA, CCA, BCI, MCA, JIS, SAE, EN, GB, DIn & IEC standards
- Built-in printing functionality provides instant hard copy test results
TPMS TESTER (Tyre Pressure Monitoring System)
- Provides the ability to activate most OEM/Universal TPMS sensors, reprogram sensor IDs, retrieve/clear TPMS DTCs and relearn sensors, helping technicians quickly find out faulty TPMS and turn off MILs
- Ultra wide coverage – Covers more than 98% of vehicles with the Tyre Pressure Monitoring System
- Supports 315MHz/433MHz tyre pressure sensor activation and matching learning
- Reads tyre pressure data, including pressure, tyre temperature, battery status and more
- Can read/copy/write sensor ID value.
DIAGNOSTICS TESTER
- Connects via DLC (Data Link Connector) and quickly accesses all the electronic control units of the vehicle and generates a detailed report about vehicle health
- Compare pre- and post- repair reports and easily identify which DTC’s are cleared and which remain unfixed
- Reads and clears generic and manufacturer specific diagnostic trouble codes (DTC’s) and turns off check engine light
- Identifies which systems are installed on the vehicle
- Views and captures (records) real-time Live Data and saves the data in text format
- 3 Types of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way – Text in list format, waveform graphs or in a merged graph for easy data comparison
- Update vehicle diagnostic software and APK
- Able to record diagnostic data that can serve as valuable information to help you in troubleshooting vehicle problems
- Able to run actuation test to access vehicle-specific subsystem and component tests
VEHICLE MAINTENANCE
This module provides an easy dial to quickly access the most commonly performed service functions as follows:
- Oil Reset Service
- Electronic Parking Brake Reset
- Steering Angle Calibration
- ABS Bleeding
- Gear Learning
- IMMO Service
- Injector Coding
- TPMS (Tyre Pressure Monitor System) Reset
- Battery Maintenance System (BMS) Reset
- Diesel Particulate Filter (DPF) Regeneration
- Electronic Throttle Position Reset
- AFS (Adaptive Front-lighting System) Reset
- AdBlue Reset (Diesel Engine Exhaust Gas Filter)
- Gearbox Matching
- Sunroof Initialisation
- Suspension Calibration
- EGR Adaption
- Windows Calibration
- Seats Calibration
- Tyre Reset
- Language Change
- A/F Reset
- Coolant Bleed
- Transport Mode
- NOx Sensor Reset
- Stop/Start Reset
VIDEOSCOPE SUPPORT
(Available as an attachment – SP61173*)
With forward and side facing cameras this probe allows technicians to quickly and easily inspect engine and vehicle components, without major disassembly
KIT INCLUDES
-
- SP Smart Tool
- Diagnostic cable – DLC
- Battery cable clamps
- USB Type-C cable
- 12v auxiliary power outlet cable
- OBD I adaptor box
- Non-16pin adaptor cable kit
All Housed in a heavy duty Blow Mold Case
SPECIFICATIONS
- Operating system: Android 10
- Memory: 4GB
- Storage: 64GB
- Screen: 5.99” Capacitive touch screen
- Resolution:720 x 1440 pixels
- Camera: Rear-facing 8.0MP camera
- Wi-Fi: 2.4GHz/5GHz dual band
- Battery: 4500mAh/7.6v
- Working temperature: 0 to 45°c
- Storage temperature: -10 to 60°c
CONNECTIVITY
- DB15 Diagnostic connector
- USB Type A port x 1 + USB Type C port
- Circular connector for battery tester clamps
- OBD-II, OBD-I (Includes adaptor cables)
- Wi-fi internet connection
(0 reviews) -
Diagnostic Tools
SP TOOLS Adjustable Advance Timing Light
- Quickly tune-up cars, trucks, marine and recreational vehicles
- Works on conventional, electronic and computer controlled ignition systems on both adjustable and nonadjustable timing systems
- Patented Skip circuitry – Tests up to 10,000RPM
- Dial type timing advance (0˚- 60˚ score)
- Heat resistant metal inductive pick-up
- One handed operation
- Detachable leads for easy replacement and use
- Protective hand guard for added safety
- Rotating barrel for better aim at timing mark
- Easy access slim-line barrel
- Optical correct lens
(0 reviews)