SP TOOLS Multimeter Dual Test Lead Set – Alligator & Standard Probe
SET INCLUDES:
- Alligator Clip Test Lead Set
- Standard Probe Test Lead Set
- Suits all SP Multimeters
ALLIGATOR CLIP TEST LEAD SET TO BANANA PLUG
- Insulated finger guarded alligator clips for easy application
- Silicon rubber insulated cable – 1m
- CAT III 1000V, 10A
STANDARD PROBE TEST LEAD SET TO BANANA PLUG
- Multi-rated probe tips with removable cap (CAT IV 600A) are insulated leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors and accidental short circuits
- Silicon rubber insulated cable – 1m
- CAT III 1000V, 10A
Related products
-
Diagnostic ToolsINSTRUMENT CHOICE Waterproof Pocket Wind Meter (Anemometer)
Kestrel-1000
Please note: These units will come with a “Certificate of Conformance” from Kestrel, however, in general this does not constitute a formal calibration certificate.The Kestrel 1000 Pocket Wind Meter was the original meter of this type, and it is still going strong. Users will receive accurate current wind speed, average wind speed and maximum wind gust reports while on the go. The only thing that has changed about this reliable model over the years is the aesthetics of the unit.The Kestrel 1000 can easily be switched between mph, km/h, ft/min, m/s, knots and Beaufort measurements. The meter features a one inch impeller mounted on a sapphire jewel bearing to ensure that it starts running at the slightest hint of air.The unit comes with a protective case, a Kestrel Certificate of Conformity, a neck lanyard and a five year manufacturer’s warranty.6 Year Warranty (5 Year Manufacturer Warranty + Bonus 1 Year Instrument Choice Warranty)
What does the Kestrel-1000 Measure?– Current Wind Speed
– Average Wind Speed– Maximum Wind Gust
Features:– Aviation green electroluminescent back light
– Stores maximum and average recordings– Auto shut down after 45 minutes with no activity– One touch clear and reset– Assembled in the U.S.– Data Hold Function– Large LCD screen– Protective Cover– Waterproof and floats– Patented user-replaceable impeller– Neck lanyard
Specifications:– Wind Speed Range: 0.4 to 60.0 m/s, 59 to 11,948 ft/min, 1.0 to 218.0 km/h, 0.8 to 135.0 mph, 0.6 to 118.3 kt and 0 to 12 B
– Display updates every second– Accuracy Rating: Within three percent– Operational Temperature: -10C to 50 C
Power Requirements:– CR2032
Dimensions:– 122 mm x 42 mm x 18 mm(0 reviews) -
Diagnostic ToolsKLEIN TOOLS Digital Multimeter Electrical Test Kit
- Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance
- Meter also test batteries, diodes and continuity
- Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
- Bright torch illuminates work area and may be used independent of the NCVT-3P voltage detection function
- ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels
- Built-in test lead holders on back of ET45 hold the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets; and the other for the convenient storage of the test leads
- RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
- Receptacle tester works on GFCI outlets and confirms the operation of the ground fault protective device
(0 reviews) -
Diagnostic ToolsKLEIN TOOLS Digital Multimeter, TRMS Auto-Ranging, 1000V, Temp, Low Impedance
- Multimeter with automatic ranging True Root Mean Square (TRMS) technology for increased accuracy
- Tester measures up to 1000V AC/DC voltage, 10A AC/DC current and 60 MOhms resistance, plus temperature, capacitance, frequency, low impedance (LoZ), duty-cycle, test diodes and continuity
- High visibility, reverse contrast display with optical sensor, to automatically optimise viewability in dark or bright ambient lighting
- Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
- Low battery indicator and easily accessible battery and fuse compartment
- Tough meter is built to withstand a 6.6′ (2 m) drop and is rated IP42
- Includes carrying pouch, test leads, thermocouple with adapter, and batteries
- CAT IV 600 V safety rating
- For use in basic and controlled electromagnetic environments, such as residential, business and light-industrial locations
(0 reviews) -
Diagnostic ToolsINSTRUMENT CHOICE Data Logging Particulate Monitor sensor with the Series 500 Handheld
IC-PM-500
This kit comes supplied with the IC-PM and the IC-HH S500L handheld monitor. The IC-PM is Aeroqual’s portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 200 will allow you to view these results in real time and if desired purchase additional sensor heads to monitor other gases.
Series 500 Lithium Air Quality Portable Monitor features and specifications:Features:– Simple to use, easy to maintain, multiple applications.– Interchangeable gas sensor heads.– Field replaceable long life Lithium battery (up to 8 hours).– Minimum, maximum and average readings.Specifications:– Measurement units: Gas: ppm or mg/m3 | Humidity: % | Temperature C or F– Reading functions: Instant, minimum, maximum, average– Sensor head: Interchangeable, replaceable– Display status indicators: Battery, sensor, standby– Sensor calibration: Zero and gain calibration– Analog output: 0-5 V– Digital Interface: RS-232 to USB– Data logging: Up to 8,188 records (2706 incl. Temp/RH)– PC data logging (Windows 7, 8, XP): Software and data cable supplied. Link data to a specific location and monitor.– Clock function: Real time– Power supply: 12V DC (power adaptor/charger supplied 100-250 V AC)– Rechargeable battery: Lithium polymer 12 V DC 2700 mA/h– Enclosure material and rating: PC and ABS; IP20 and NEMA 1 equivalent– Size (with sensor head): (L x W x D) 195 x 122 x 54 (mm); 7 x 4 x 2 (in)– Environmental operating conditions: Temperature: -5 C to 45 C/Humidity: 0 to 95 % non-condensing– Temperature & Humidity sensor: Range – 40 C to 124 C (- 40 F to 255 F); Range 0 to 100 % RHParticulate Matter Sensor features and specifications:The IC-PM is Aeroqual’s portable portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Compatible with Aeroqual’s Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.– Range: 0.000 to 1.000 mg /m3– Measurement Parameters: PM2.5 and PM10– Sensor Type: Laser particle counter– Minimum Detection Limit: 0.001 mg/m3– Accuracy of Factory Calibration: +/- (0.002 mg/m3 + 15 % of reading)– Resolution: 0.001 mg/3– Response Time: 5 Seconds– Temp: 0 to 40C– Relative Humidity: 0 to 90% non-condensating(0 reviews)