[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

SP TOOLS Mechanics Stethoscope

  • High grade instrument made from quality materials
  • Metal ear piece and thick flexible tubing
  • Quality diaphragm assembly
  • Assists in locating abnormal mechanical sounds within a component
  • Ensures targeted sounds are transmitted clearly
  • Minimises phantom and background noises
  • A probe length of 285mm and tube length of 600mm
  • Extra reach when working in confined areas
  • An essential diagnostic tool for fault finding in vehicle engines and engine bays,under-body, transmissions, differentials & bearings

In Stock
SKU: SP62001 Categories: , , ,

Related products

  • Diagnostic Tools

    SP TOOLS Multimeter Dual Test Lead Set – Alligator & Standard Probe

    SET INCLUDES:

    • Alligator Clip Test Lead Set
    • Standard Probe Test Lead Set
    • Suits all SP Multimeters

    ALLIGATOR CLIP TEST LEAD SET TO BANANA PLUG

    • Insulated finger guarded alligator clips for easy application
    • Silicon rubber insulated cable – 1m
    • CAT III 1000V, 10A

    STANDARD PROBE TEST LEAD SET TO BANANA PLUG

    • Multi-rated probe tips with removable cap (CAT IV 600A) are insulated leaving only 2mm of exposed metal to prevent inadvertent bridging of live conductors and accidental short circuits
    • Silicon rubber insulated cable – 1m
    • CAT III 1000V, 10A
    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    INSTRUMENT CHOICE Data Logging Particulate Monitor sensor with the Series 500 Handheld

    IC-PM-500

    This kit comes supplied with the IC-PM and the IC-HH S500L handheld monitor. The IC-PM is Aeroqual’s portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Whilst the Series 200 will allow you to view these results in real time and if desired purchase additional sensor heads to monitor other gases.

    Series 500 Lithium Air Quality Portable Monitor features and specifications:
    Features:
    – Simple to use, easy to maintain, multiple applications.
    – Interchangeable gas sensor heads.
    – Field replaceable long life Lithium battery (up to 8 hours).
    – Minimum, maximum and average readings.
    Specifications:
    – Measurement units: Gas: ppm or mg/m3 | Humidity: % | Temperature C or F
    – Reading functions: Instant, minimum, maximum, average
    – Sensor head: Interchangeable, replaceable
    – Display status indicators: Battery, sensor, standby
    – Sensor calibration: Zero and gain calibration
    – Analog output: 0-5 V
    – Digital Interface: RS-232 to USB
    – Data logging: Up to 8,188 records (2706 incl. Temp/RH)
    – PC data logging (Windows 7, 8, XP): Software and data cable supplied. Link data to a specific location and monitor.
    – Clock function: Real time
    – Power supply: 12V DC (power adaptor/charger supplied 100-250 V AC)
    – Rechargeable battery: Lithium polymer 12 V DC 2700 mA/h
    – Enclosure material and rating: PC and ABS; IP20 and NEMA 1 equivalent
    – Size (with sensor head): (L x W x D) 195 x 122 x 54 (mm); 7 x 4 x 2 (in)
    – Environmental operating conditions: Temperature: -5 C to 45 C/Humidity: 0 to 95 % non-condensing
    – Temperature & Humidity sensor: Range – 40 C to 124 C (- 40 F to 255 F); Range 0 to 100 % RH
    Particulate Matter Sensor features and specifications:
    The IC-PM is Aeroqual’s portable portable particulate monitor for accurate and simultaneous measurement of PM10 and PM2.5 in ambient outdoor and indoor environments. Compatible with Aeroqual’s Series 200/300/500 air quality monitors, the portable particulate monitor will output particulate matter (PM) measurements for PM10 and PM2.5 in real-time.
    – Range: 0.000 to 1.000 mg /m3
    – Measurement Parameters: PM2.5 and PM10
    – Sensor Type: Laser particle counter
    – Minimum Detection Limit: 0.001 mg/m3
    – Accuracy of Factory Calibration: +/- (0.002 mg/m3 + 15 % of reading)
    – Resolution: 0.001 mg/3
    – Response Time: 5 Seconds
    – Temp: 0 to 40C
    – Relative Humidity: 0 to 90% non-condensating

     

    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    INSTRUMENT CHOICE Moisture Meter For Wood & Building Materials With Thermometer

    0560-6062

    In addition to material moisture, testo 606-2 also measures air moisture and temperature. In this way, drying conditions can be reliably assessed directly on-site

    • Precise measurement of wood moisture with stored characteristics curves for beech, spruce, larch, oak, pine, maple
    • Additional characterisitic curves for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
    • Hold function for easy readout of readings
    • Display illumination
    • Self-test function
    • Protective cap for safe storage
    • Including wrist strap and belt holder
    • Measurement of temperature and humidity in ambient air
    • Air humidity measurement with the long-term stable Testo humidity sensor
    • Incl. dewpoint calculation and wet bulb

    Storage temperature: -40 to +70 C
    Operating temperature: -10 to +50 C
    Battery type: 2 batteries Type AAA
    Battery life: 130 h
    Weight: 90 g
    Dimensions: 119 x 46 x 25 mm

    Probe type NTC
    Meas. range: -10 to +50 C
    Accuracy: 0.5 C
    Resolution: 0.1 C

    Probe type Conductive measurement cell
    Meas. Range: 0 to 50%
    Accuracy: 1%
    Resolution: 0.1
    Probe type: humid. sensor, cap.
    Meas. Range: 0 to 100 %RH
    Accuracy: 2.5 %RH (5 to 95 %RH)
    Resolution: 0.1 %RH

    (0 reviews)
    Add to Quote
  • Diagnostic Tools

    SP TOOLS Diagnostic Pump Kit – Dual Mode 2 Way Quick Switch
    • High quality diagnostic tool
    • 2-Way pressure and vacuum test functions
    • Patented design – Intuitive rotary dial mode switch – Pistol grip with lever
    • High volume efficiency in both pressure and vacuum modes
    • Manufactured from reinforced composite materials – Very high strength – High impact resistance – Excellent chemical resistance
    • Integrated rear mount gauge – Optimum viewing angle – Maximum impact protection
    • High quality silicon material hoses with quick couple hose fittings – Quick hose interchange – No leaks under vacuum or pressure
    • Custom blow mold storage case

    DUAL MODE PRESSURE AND VACUUM FUNCTIONS:

    Pressure Mode:

    • Monitor turbo charger boost pressure
    • Test and adjust turbo charger waste gate actuators
    • Test pressure operated central locking systems
    • Test fuel tank vent valves
    • Test one way valves
    • Diagnose small engine faults
    Vacuum Mode:

    • Test EGR valve
    • Test fuel pressure regulator
    • Test map sensor
    • Test thermal vacuum switches
    • Test electric vacuum switches
    • Test one way valves
    • Test HVAC valves
    • Test automatic transmission modulator valve
    • Test central locking systems
    (0 reviews)
    Add to Quote