SP TOOLS Circuit Tester – Short Probe – 6 to 24v
FEATURES
- Tests 6, 12 & 24 Volt electric circuits
- Sharp, short length probe
- Handle lights up if the circuit is good
- Long 1200mm lead (1.2m)
- Heavy duty insulated alligator clip
Related products
-
Diagnostic ToolsSP TOOLS Digital Multimeter – Deluxe Automotive – 0.8 to 100V
FEATURES
- Measures DC/AC voltage, DC/AC current (max 10A), resistance, capacitance, frequency (electrial & electronic), continuity & diode check
- True-RMS measurements
- Large 6000 count digital LCD display with backlight
- Rugged design for heavy duty use
- Auto power off
- Auto ranging
- Hold function
- Includes probe test leads
- Cat III 1000V
SPECIFICATIONS
- DC voltage detection: 2V / 20V / 100V
- Resistance detection: 2000 Ω / 20K Ω / 200K Ω / 2M Ω / 20M Ω
- On-off detection: 2000 Ω / beep less than 50 Ω
(0 reviews) -
Electrical TestersFLUKE LVD2 Non-Contact Voltage Tester
- Non-contact AC voltage tester and LED flashlight
- Detects from 90 to 600 V AC
- Features dual-sensitivity for two levels of detection
- Indicates proximity to AC voltage source with blue light
- Indicates you’re at the source with red light
- Ultra-bright white LED light with 100,000-hour bulb life
- Safety rated to CAT IV 600 V
- Operating temperature 0°C to 50°C
- AAA battery included
(0 reviews) -
Diagnostic ToolsKLEIN TOOLS Digital Multimeter Electrical Test Kit
- Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance
- Meter also test batteries, diodes and continuity
- Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
- Bright torch illuminates work area and may be used independent of the NCVT-3P voltage detection function
- ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels
- Built-in test lead holders on back of ET45 hold the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets; and the other for the convenient storage of the test leads
- RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
- Receptacle tester works on GFCI outlets and confirms the operation of the ground fault protective device
(0 reviews) -
Diagnostic ToolsKLEIN TOOLS Test Kit with Multimeter, Non-Contact Volt Tester, Receptacle Tester
- Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2MΩ resistance
- Non-Contact Voltage Tester Cat. No. NCVT1P has a bright green LED to indicate the tester is working; it changes to red and audible tones sound when a voltage is detected
- NCVT1P has a high-intensity, bright red LED that illuminates and an audible tone when a voltage is detected from the 50 to 1000V AC power operating range
- Receptacle tester detects wiring configurations and indicates correct wiring, as well as identifying common wiring faults
- Identifies open ground, open hot, open neutral, hot/ground reversed; it does not indicate quality of the ground, multiple hot wires, or a combination of defects
- MM300 multimeter tests continuity with visual and audible continuity indicators
- Test leads included for Cat. No. MM300; batteries included for Cat. Nos. NCVT1P and MM300
(0 reviews)