Additional information
| Weight | 0.3 kg |
|---|---|
| Dimensions | 25 × 15 × 15 cm |
SKYLOTEC Visix
This optimally shaped transparent all-purpose half visor protects the face from impacts and flying parts. The unique sealing lip prevents even the smallest particles from entering. It is made of polycarbonate with high impact protection. VISIX can be easily and quickly attached to the Gear Rack of any INCEPTOR GRX helmet without additional tools. When working, the visor can be flexibly adjusted to be worn lowered, at half height or upwards. It also provides exterior protection against scratches as well as fog protection from the inside. – Molded polycarbonate visor with high impact protection – Versatile, easy to fit – Compatible with all INCEPTOR GRX helmets
Related products
-
LINQLINQ Anchor Tetha V-Bar Straight 280mm
- Code HSTBS280
- The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Provides safe 360° work area
- For use on metal or tile roofs
- 280mm size all purpose metal roofs
- Conforms to ASNZS 1891.4 requirements
(0 reviews) -
HarnessesSKYLOTEC Ignite Nucleon Harness
This full-featured fall arrest and restraint harness with skid plate and arrester eyelet was developed specifically for wind energy, but it is also used in many other fields such as telecoms, power and construction where the highest standards of safety and functionality apply. IGNITE NUCLEON scores with a breathable hip pad that distributes the load evenly on the hip and is protected against abrasion from the outside with a protective sliding plate. The correct position of the sternal and dorsal fall arrest eyelet can be perfectly adjusted to the user. Leg pads are interchangeable if required. An integrated fall indicator and innovative stainless steel OKTALOCK buckles provide additional safety. Excess webbing is no longer a nuisance thanks to practical webbing fixation. The material loops and tool eyelets are used to accommodate tools.
- Lightweight and comfortable to wear.
- Sliding plate against abrasion.
- Breathable hip pads.
(0 reviews)Add to Quote This product has multiple variants. The options may be chosen on the product page -
Tool LanyardsGRIPPS Coil Tether Single Action 1kg
Tethering to a tool belt, pouch, holster, or harness, the Coil Tether Single-Action is engineered to stay out of the way when not in use, readily extending to its maximum length when the tool is in use.
Lightweight single-action carabiners mounted on swivel heads prevent tangles and unnecessary tension while using your tool.
The extra-thick PU coating on the stainless steel coil prevents kinking and is resistant to heat and sharp edges.
Key Features
- Two lightweight single-action carabiners.
- Suitable for holsters, belts, pouches & harnesses.
- Low profile & lightweight design.
- Extra thick PU coated stainless steel coil.
- Heat & cut resistance.
Specifications
- Min Length: 40cm / 16″
- Max Length: 1.6m / 63″
- Max Load: 1.0kg / 2.2lbs
- Two Single-Action Carabiner
(0 reviews) -
Height SafetyLINQ Harness Supreme EDI Tower Worker – Standard (M-L)
- Code H402
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment.
- Liqui-Pel Technology for liquid protection, also easier to clean the harness.
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation.
- Retro-Reflective Thread in webbing for improved visibility in low light.
- Rear Barr D allows easier access and better weight distribution for twin retractable fall arrest devices.
- Closed Loop Webbing system on rear Dorsal Barr D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head.
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements.
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker.
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap.
- Air COOL Padded Shoulder Straps for increased comfort and increased air flow during long periods of use.
- Padded Sub Pelvic Seat for Pole Strap restraint High Comfort spec.
- Large Pole Strap Side Loops for ease of connecting Pole Strap (work positioning).
- Adjustable Waist Belt with tool loop attachments.
- Quick Release Buckles. Padding under buckles.
- Forward placed pole strap attachment points makes for easier to reach connection.
- Service Pouch on back.
- Comes with Harness Bag PART CODE: NBHAR.
(0 reviews)
