Additional information
| Style | HSG-022-2,5-3, HSG-AUS-022-1,8-4, HSG-AUS-022-2,5-8, HSG-AUS-022-1,8-8, HSG-AUS-022-2,5-4 |
|---|
SKYLOTEC Peanut Y
HSG-022-2,5-3
The compact connecting device PEANUT Y with FS90 ST karabiner convinces with its self-retracting arms, which do not restrict the working radius and ensure that the fall height is extremely low. The karabiner with an opening width of 59 cm is variable in use and extremely robust. The lanyard is perfectly suited for continuous, reciprocal securing – even at lower heights. The PEANUT Y is edge-suitable and thus also serves for horizontal securing. The product contains the One-4-All damper and is therefore suitable for a very wide range of user weights from 50 to 135 kilograms. Due to the 2.5 m long arms, the PEANUT Y is ideal for securing in scaffolding. The fastener is available in a variety of karabiner variants (aluminium, steel, etc.). A red indicator shows when the strap has been released and provides additional safety.
__________________________________________________________________
HSG-AUS-022-1,8-4
Ultra-compact fall protection device with FS 90 ANSI carabiner on anchoring. The Peanut is already equipped with the new One-4-All shock absorber and is therefore approved for the weight class 50-135-kg.1.8 m length for use in aerial work platforms.
__________________________________________________________________
HSG-AUS-022-2,5-8 & HSG-AUS-022-1,8-8
Ultra-compact fall protection device with KOBRA TRI carabiner on anchoring. The Peanut is already equipped with the new One-4-All shock absorber and is therefore approved for the weight class 50-135-kg.1.8 m length for use in aerial work platforms.
__________________________________________________________________
Related products
-
Height SafetyGRIPPS Adjustable Two-Way Radio Holster
Compatible with virtually every Two-Way Radio on the market, the Adjustable Radio Holster is also compatible with other small electronic devices such as phones and cameras.
Easily mounted to either work belts or harnesses, the Adjustable Radio Holster uses a two-way Velcro mounting sleeve to secure itself to the user.
Use in conjunction with a GRIPPS® Coil E-Tether With E-Catch.
Key Features
- Compatible with all standard work belts.
- Fully adjustable to be compatible with virtually all Two-Way Radios.
- Suitable for use with all small electronic devices such as phones & cameras.
- Easily mountable to work belts or harnesses via a two-way Velcro mounting sleeve.
Kit Contents
- 1 x Two-Way Radio Holster
- 1 x Non-Conductive Coil E-Tether With Poly Clip
- 1 x E-Catch
Specifications
- Max Load: 0.5kg / 1.1lbs
- CONFORMS TO ANSI/ISEA 121-2018
(0 reviews) -
LINQLINQ Anchor Tetha V-Bar Straight 500mm
- Code HSTBS500
- The LINQ Anchor Tetha V-Bar temporary anchor plates are engineered for extreme workplace situations.
- Boasting a minimum breaking strength of 22kN, the range has been developed to be a durable and efficient temporary roof line anchor system.
- (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load.)
- An affordable temporary and reusable alternative to installation of a permanent purlin style anchor
- Compact design and lightweight materials provide a tried and tested safety solution
- Rated for up to a 140kg user
- Can withstand fall arrest forces up to 22kN (It is important to ensure that the structure to which any LINQ Tetha anchor plate is installed, has sufficient strength (refer to ASNZS 1891.4) to sustain the applied load)
- The Tetha T-Bar has an easy to use double tie off L-screw and wing nut applicator that clips onto the roof edge (for suitable profiles only)
- Can be used as a temporary anchor point in applications along a roof line where no permanent anchor point exists.
- Quick installation and removal. (Installation should always be conducted by a competent person as described in ASNZS 1891.4)
- Provides safe 360° work area
- For use on metal or tile roofs
- 500mm used for Trimdeck or Custom Orb roofs
- Conforms to ASNZS 1891.4 requirements
(0 reviews) -
Height SafetyLINQ Harness Essential – Standard (M-L)
- Code H101
- Pebble Weave Webbing design provides maximum grip for buckles, eliminating webbing slippage and the need for continual re-adjustment
- High Tenacity UV stabilised webbing, enhances resistance to solvents and UV light degradation
- Retro-Reflective Thread in webbing for improved visibility in low light
- Large Dorsal D Ring for easier connection
- Closed Loop Webbing system on rear Dorsal D maintains positioning of Dorsal D in the event of a fall. Significantly reducing the risk of injury from hardware hitting the back of workers head
- Extended Belay Loops make connection of hardware easier, also maintains absolute front and centre positioning as per AS/NZS requirements
- Sub Pelvic Strap integration along the line of Belay Loops, places the worker away from hardware in the event of a fall, significantly reducing the risk of injury from hardware hitting the worker
- Articulated Chest Strap and shoulder adjustment points, designed for additional user comfort and female users, due to lower positioning of strap
- Padding under buckles
- Service Pouch on back
(0 reviews) -
Tool LanyardsGRIPPS Screwlock Cable
The Screwlock Cable provides a quick, easy and cost-effective way to create a certified, load-rated tool connection point for tools with a suitable existing hole.
With a core band made from aircraft-grade steel, the load-rated and certified Screwlock Cable is as dependable as it is hard-wearing.
Create your secure tool connection point by simply threading the Screwlock Cable through a suitable existing hang-hole/slot in your tool, and screw closed. Add a drop of thread-locking compound before you screw shut to create a permanent load rated connection point on your tools.
Key Features
- PU coated aircraft-grade steel.
- Easy to maintain & swap between tools.
- Easy installation process that can be performed on-site.
- Can be locked permanently using thread locking compounds.
- Available in four sizes.
Specifications
- Size: 3mm x 150mm / 0.1″ x 6.0″
- Max Load: 1.0kg / 2.2lbs
Conforms to ANSI/ISEA121-2018
(0 reviews)
