[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

SKYLOTEC Ignite Proton Wind Harness

The IGNITE PROTON WIND features all the same attributes as the PROTON but with the following additions to this already‚ state of the art harness:

· Synthetic rear protection plate on the rear of the AIRPAD waist belt. Provides protection to the AIRPAD in the tight confines of a wind turbine ladder or even general work at height applications.

· Chest eyelet for belay, but also for rescue

· Alloy Dorsal & Sternal attachment points

· Alloy Limited Fall Arrest attachment point on the centre front of the waist belt.

· Adjustable Confined Space loops

In Stock
SKU: N/A Categories: , , ,

Additional information

Weight 4 kg
Dimensions 38 × 31 × 29 cm
Size

, ,

Related products

    Height Safety

    LINQ Roofers Kit Standard – H201 Harness
    • Code KITRSTDH201
    • LINQ Tactician Riggers harness H201
    • WLO1SNSN Shock Absorbing Webbing Lanyard Single Leg (with 2 x Snap Hooks) x 1
    • RKRG015 Rope kernmantle with thimble eye & rope grab. 15M with permanently attached shock absorbing 450mm assembly and screw gate karabiner
    • HSASE2515 Anchor Strap Endless 25mm – 1.5M x 1
    • KSGSA18 Screw Gate Karabiner x 2
    • Kernmantle rope exceeds 14.7kN
    • 110gm of polyester as opposed to 65gm. This results in exceptional strength capabilities
    • Rope grab as per restraint technique, in order to ensure stopping force is less than 6kN, rope grab should always be used in conjunction with a shock absorbing element
    • Batch tested to AS/NZS 1891.1: 3.8m drop using 100kg test weight, reducing forces to under 4.5kN
    • An exclusive Extended Length Energy Absorber (ELEA) designed to protect a workers, of up to 160kg, tools and equipment
    • Drop forged lanyard hardware for added strength in case of extreme conditions
    • Contrast stitch thread colour for easy inspection and AS/NZS 1891.1 compliance
    • Pebble weave webbing provides maximum grip precluding incidental buckle slippage
    • Combined belay loop sub pelvic strap positioning reduces risk of throat and facial injury at moment of impact
    • Retro-reflectivity built into webbing
    • 160kg wearer capacity (combined weight of wearer, clothing and tools) when used in conjunction with LINQ shock absorbing lanyard
    • Articulated chest and shoulder straps adjustment points designed for female wearers
    • Contrast stitch thread colour for easy inspection and AS/NZS 1891.1 compliance
    • Unique to LINQ – Green for safely locked – Red for not locked feature / indicator
    • Available with Kit Bag, Round Bucket or Square Bucket
    (0 reviews)
    Add to Quote
  • Tool Lanyards

    GRIPPS Coil Tether Single Action 1kg

    Tethering to a tool belt, pouch, holster, or harness, the Coil Tether Single-Action is engineered to stay out of the way when not in use, readily extending to its maximum length when the tool is in use.

    Lightweight single-action carabiners mounted on swivel heads prevent tangles and unnecessary tension while using your tool.

    The extra-thick PU coating on the stainless steel coil prevents kinking and is resistant to heat and sharp edges.

    Key Features

    • Two lightweight single-action carabiners.
    • Suitable for holsters, belts, pouches & harnesses.
    • Low profile & lightweight design.
    • Extra thick PU coated stainless steel coil.
    • Heat & cut resistance.

    Specifications

    • Min Length: 40cm / 16″
    • Max Length: 1.6m / 63″
    • Max Load: 1.0kg / 2.2lbs
    • Two Single-Action Carabiner
    (0 reviews)
    Add to Quote
  • Height Safety

    LINQ Karabiner Triple Action Steel Alloy 26mm
    • Code KTASA26
    • Opening: 26mm
    • Weight: 275gm
    • Rating: 30kN
    • Width: 82mm
    • Length: 123mm
    (0 reviews)
    Add to Quote
    Accessories

    GRIPPS Little Gripper Kit

    If you need a tool tethering solution that’s quick to apply and doesn’t hamper tool functionality, then you need a Little Gripper.

    Moulded from a specialised TPU material, the Little Gripper provides an instant load-rated tool connection point without the need for adhesives.

    Compatible with round and polygonal-shaped shafts, the 4 sizes cover a massive range of tools including screwdrivers, punches and more.

    Key Features

    • Moulded from custom German-engineered TPU compounds.
    • No additional adhesives or tools are required for application.
    • UV-protected for long-lasting outdoor use.
    • Compatible with tool shafts of all shapes & thicknesses.

     

    Kit Contents:

    • 2 x Size #1 Little Gripper
    • 2 x Size #2 Little Gripper
    • 2 x Size #3 Little Gripper
    • 2 x Size #4 Little Gripper
    • 4 x GrippLink Connectors

    Specifications

    Size Tool Shaft Diameter Max Load
    (Without GrippLink)    		 Max Load
    (With GrippLink)
    #1  3.5mm – 6.0mm
    0.1″ – 0.2″    		 0.5kg
    1.1lbs    		 1.0kg
    2.2lbs
    #2  5.5mm – 9.0mm
    0.2″ – 0.3″    		 0.5kg
    1.1lbs    		 1.0kg
    2.2lbs
    #3 8.0mm – 13mm
    0.3″ – 0.5″    		 0.5kg
    1.1lbs    		 2.5kg
    5.5lbs
    #4 12mm – 16mm
    0.5″ – 0.6″    		 0.5kg
    1.1lbs    		 2.5kg
    5.5lbs
    (0 reviews)
    Add to Quote