Sika® Firerate is an intumescent fire rated, 1-component, acrylic joint sealant.
Up to 4 hours fire resistance according to AS 1530.4
Very good resistance to weathering
Movement capability of ± 20 %
Sika® Firerate is designed for fire rated movement and connection joints on porous and non-porous substrates. It is suitable for interior applications.
Advantages
Up to 4 hours fire resistance according to AS 1530.4
Ready to use water based general purpose surface filler for use in wet areas
Sika® Filler-107 is a water based, ready to use general purpose surface and joint filler intended for use in wet areas
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Sika® Filler-107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers in wet environments such as kitchens and bathrooms.
Sika® Filler-107 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)
CRC TAC2 is a tough adhesive lubricant that bonds to chain/wear surfaces to keep them in peak operating condition by reducing friction and wear that lead to metal fatigue.
Recommended for all types of chain drives, open gears, car wash equipment, bottling plant, hoists, conveyors, fork lifts, tractors, farm equipment, cement trucks, wire ropes and marine applications.
Resists cold, hot and salt water wash off and high temperature sling off. Reduces wear and friction. Lubricates effectively chain drives, open gears, pulleys, wire ropes, conveyors. Penetrates vital chain pin and bushing areas and wire rope strands.
Sikaflex®-252 is an elastic 1-component polyurethane adhesive especially designed for bonding large components in vehicle assembly. It is suitable for bonding coated metal, GRP, ceramic materials and plastics.
Bonds well to a wide variety of substrates
Capable of withstanding high dynamic stresses
Good gap-filling properties
Bonds well to a wide variety of substrates
Capable of withstanding high dynamic stresses
Good gap-filling properties
Can be painted
Vibration-damping
Electrically non-conductive
Usage
Sikaflex®-252 is suitable for assemblies that are subject to dynamic stresses. Suitable substrate materials are timber, metals, particularly aluminum (including anodized components), sheet steel (including phosphated, chromated and galvanized components), metal primers and paint coatings (2-component systems), ceramic materials and plastics. Seek manufacturer’s advice before using on plastics that are prone to stress cracking. This product is suitable for professional experienced users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.