Sika Boom® Cleaner is an active cleaner for cleaning Sika Boom® application guns and fresh Sika Boom® residue from surfaces.
Very good PU foam cleaner
Very good PU spray gun and equipment cleaner
Integral valve for precise application
Clean Sika® PU foam application equipment after use.
Removes fresh, uncured polyurethane foam residue from equipment and other surfaces, as well as cleaning and removing grease from contaminated substrates.
Sikaflex®-227 is a 1-component polyurethane sealant designed for car body sealing. It cures on exposure to atmospheric moisture to a durable elastomer. It adheres well to a wide variaty of substrates.
Short cut-off string
Fast skinning
Low odour
Short cut-off string
Fast skinning
Low odour
Overhead work possible
Bonds well to a wide variety of substrates
Can be sanded
Can be painted
Resistant to ageing
Silicone free
Usage
Sikaflex®-227 is suitable for sealing, seam sealing, simple bonding as well as for vibration reduction and sound deadening measures in crash body repair and car body construction. Suitable substrates are metal primers and paint coatings (2-c systems), metals, painted plastics and plastics.
Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-227 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Ready to use water based general purpose surface filler for use in wet areas
Sika® Filler-107 is a water based, ready to use general purpose surface and joint filler intended for use in wet areas
Ready to use, no mixing required
Easy application
High initial tack or grab on plaster and concrete
Sika® Filler-107 is suitable for interior surface filling work on plaster, woven fabrics, old wallpapers in wet environments such as kitchens and bathrooms.
Sika® Filler-107 complies with EN 15824 “Specifications for external and internal plasters based on organic binders” and EN 13963 “Jointing materials for gypsum plasterboards” – Type 3A (ready-mix, dual-purpose compound)
CRC Leak Detector is formulated for the quick detection of gas and air leaks. The water based formula contains no oils, silicones or harmful solvents. CRC Leak Detector quickly and reliably locates gas leaks and pressure losses in pipes and pressurised systems by forming highly visible bubbles when applied over any leak.
Recommended for use on refrigeration units, air conditioners, exhausts, pipes, welding seams and compressors, can be used for almost all types of gasses (compressed air, refrigerants, natural gas, propane, butane, acetylene, oxygen, LPG, nitrogen and carbon dioxide)
Finds leaks fast, highlights all leaks, even under low pressure. Non-flammable. Water based formula with no oils, silicones or harmful solvents.
Multifunctional adhesive sealant for marine applications
Sikaflex®-291 is a non-sag, 1-component polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture.
Sikaflex®-291 meets the requirements set out by the International Maritime Organisation (IMO).
Bonds well to a wide variety of substrates
Good ageing and weathering resistance
Elastic
Bonds well to a wide variety of substrates
Good ageing and weathering resistance
Elastic
Low odour
Non-corrosive
Can be over painted
Can be sanded
Usage
Sikaflex®-291 is a multipurpose product for use in marine constructions. It is suitable for making elastic, vibration-resistant joint seals, and can also be used for a variety of interior sealing applications. Sikaflex®-291 bonds well to the materials commonly used in marine construction like wood, metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics (GRP, etc.). Sikaflex®-291 must not be used to seal plastics that are prone to stress cracking (e.g. Plexiglas, Polycarbonate, etc.). Once cured, Sikaflex®-291 can easily be sanded as required. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.