[email protected]
189 Gurrundah Rd, Goulburn NSW 2580
Call us:(02) 4823 5655

SABER Countersinks HSS-Co5 (Cobalt) Cross Hole Round Shank

  • For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
  • The intersection of the hole and cone form the cutting edge on the tool.
  • The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
  • If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
  • This clearance is referred to as cutting relief.
  • The radially relieved single cutting edge provides fast stock removal with low vibration for chatter-free operation ensuring the smoothest finish.
  • These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons.
  • They also may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
  • HSS-Co5 (Cobalt) countersinks are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
  • Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
  • Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
  • The coating higher speed and feed rates can be achieved and tool life is greatly increased.
  • The TiN coating is achieved by Physical Vapour Deposition (PVD).

In Stock
SKU: N/A Categories: ,

Additional information

Size

10mm, 15mm, 21mm, 28mm, 35mm

Related products

  • Drill Bits & Sets

    SUTTON Jobber Drill Sets – Silver Bullet

    Sutton Tools Silver Bullet jobber drills are a general purpose drill bit designed for machine and hand held drilling in a wide range of ferrous & non-ferrous materials such as steel, aluminium, brass, wood & plastics.

    (0 reviews)
    Add to Quote
  • Drill Bits & Sets

    BORDO TCT Ceramic Tile Drill
    • Extreme Performance Multi-Facet Tungsten Carbide Tipped Ceramic Tile Drill.
    • These Rotary Only ceramic tile drills provide outstanding performance and extended tool life in hard ceramic materials.
    • Unique cutting edge geometry in conjunction with high temperature brazing to ensure reliable and accurate drilling in multiple hole applications.
    • Use of water cooling will extend bit life.
    • Although these drill bits are not recommended for drilling vitrified porcelain, their superior multi-facet tungsten carbide tip enables them to drill most materials of this type, albeit with a reduced tool life.
    • These ceramic tile drills can also be used to successfully drill in brick, concrete and other masonry materials.
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Drill Bits & Sets

    BORDO HSS Power-Bore Auger Bit
    • HSS Power-Bore self feeding auger drill.
    • The Bordo range of Power-Bore HSS split point auger bits outperform conventional augers in tough Australian hardwood.
    • Hex shank eliminates chuck slip.
    • Self feeding HSS threaded split point.
    • Outperforms and outlasts conventional augers.
    • Extreme performance in tough Australian hardwoods.
    • Heavy duty construction for long life – guaranteed!
    (0 reviews)
    Add to Quote This product has multiple variants. The options may be chosen on the product page
  • Drill Bits & Sets

    BORDO 4 Cutter Glass and Tile Drill Set
    • 4-10mm 5 Pce 4 Cutter Glass and Tile Drill Set
    • Tungsten Carbide 4 Cutter Glass and Tile Drill Set
    • Precision diamond ground, double chamfered spear point tungsten carbide for fast cutting and extreme tool life (when used at slow to medium speeds).
    • Fast starting with reduced bit wander.
    • Suitable for use in: glazed and un-glazed ceramic tiles, glazed porcelain tiles, through-body porcelain tiles, plate (float) glass and annealed glass.
    • Not suitable for use with toughened or laminated safety glass.
    • Use a slow speed with steady but gentle pressure.
    • Reduce the pressure at break through.
    • For increased bit life use a cutting fluid/lubricant such as water or turpentine to reduce heat.
    • When drilling multiple holes in ceramic tiles, or when drilling vitrified porcelain, we recommend using either Bordo ceramic tile drills, the Bordo mist drill product range or Brilliant Diamond core drills.
    • Tungsten Carbide (commonly referred to as Carbide) is a chemical compound containing equal parts of tungsten and carbon atoms.
    • Carbide is three times stiffer than steel and is much denser than either steel or titanium.
    • Carbide has a very high abrasion resistance and can also withstand higher temperatures than standard HSS.
    • Carbide tools are often used for machining hard materials such as ceramics and stainless steel, as well as in situations where other tools would wear away, such as high volume production runs.
    • Because carbide tools maintain a sharp cutting edge better than other tools, they generally produce a better finish on parts, and their temperature resistance allows faster machining.
    • Whilst tungsten carbide is extremely hard it is also brittle so it is important to avoid bit “chattering” as this is the most common cause of tool failure.
    (0 reviews)
    Add to Quote