For countersinking and deburring in a wide range of materials including ferrous and non-ferrous metals.
The intersection of the hole and cone form the cutting edge on the tool.
The cone is not truly symmetrical as it is essential that the cone retreats away from the cutting edge as the tool rotates.
If this does not occur the cutting edge will lack clearance and rub rather than bite into the material.
This clearance is referred to as cutting relief.
The radially relieved single cutting edge provides fast stock removal with low vibration for chatter-free operation ensuring the smoothest finish.
These tools are best used as deburring tools, where a burr, or sharp edge, from a previous machining operation needs to be removed for cosmetic and safety reasons.
They also may be used in softer materials (such as wood or plastic) to create a countersunk hole for a screw.
HSS-Co5 (Cobalt) countersinks are extremely hard and provide superior performance and increased tool life especially in stainless steel and high tensile steel.
Bronze Finish (gold oxide) surface treatment. The metallic brown coloured low temperature temper treatment is normally only used on cobalt tools for identification purposes.
Gold Finish TiN Coating (Titanium Nitride) helps to dissipate heat and reduces friction and cold welding.
The coating higher speed and feed rates can be achieved and tool life is greatly increased.
The TiN coating is achieved by Physical Vapour Deposition (PVD).
Sutton Tools TiNite® jobber drills are for high performance drilling. Lasts up to 6 times longer than standard HSS drill bits. For drilling metal & tougher alloy steels such as steel, stainless steel, copper, brass, aluminium & cast iron.
The Bordo range of Self Feeding Wood Bits are ideal for drilling large diameter holes in soft woods for plumbing and conduit penetrations and a wide variety of other applications.
7/16″ hex shanks to suit drills with 1/2″ (or larger) chuck.
Precision milled shank which eliminates wobble and runout.
Spurs on the outside diameter cut holes cleanly and accurately.
Dual inside cutting planes shave hole radius for clean, smooth holes without pressure.
Fored in one piece from high carbon steel for maximum strength under the toughest drilling conditions.
Sutton Tools Blue Bullet jobber drills are a general purpose drill bit designed for machine and hand held drilling ferrous metals. The blue finish reduces chip build up on the cutting edge and is a better choice when drilling ferrous materials.